Merge 24.04 into master and prepare release

Merge 24.04 into master and prepare release

.env

@@ -0,0 +1,125 @@
+# T-Pot config file. Do not remove.
+
+###############################################
+# T-Pot Base Settings - Adjust to your needs. #
+###############################################
+
+# Set Web usernames and passwords here. This section will be used to create / update the Nginx password file nginxpasswd.
+#  <empty>: This is the default
+#  <base64 encoded htpasswd usernames / passwords>:
+#   Use 'htpasswd -n -b "username" "password" | base64 -w0' to create the WEB_USER if you want to manually deploy T-Pot, run 'install.sh' to automatically add a user during installation, or 'genuser.sh' if you just want to add a web user.
+#   Example: 'htpasswd -n -b "tsec" "tsec" | base64 -w0' will print dHNlYzokYXByMSRYUnE2SC5rbiRVRjZQM1VVQmJVNWJUQmNmSGRuUFQxCgo=
+#   Copy the string and replace WEB_USER=dHNlYzokYXByMSRYUnE2SC5rbiRVRjZQM1VVQmJVNWJUQmNmSGRuUFQxCgo=
+#   Multiple users are possible:
+#   WEB_USER=dHNlYzokYXByMSRYUnE2SC5rbiRVRjZQM1VVQmJVNWJUQmNmSGRuUFQxCgo= dHNlYzokYXByMSR6VUFHVWdmOCRROXI3a09CTjFjY3lCeU1DTloyanEvCgo=
+WEB_USER=
+
+# Set Logstash Web usernames and passwords here. This section will be used to create / update the Nginx password file lswebpasswd.
+# The Lostsash Web usernames are used for T-Pot log ingestion via Logstash, each sensor should have its own user.
+#  <empty>: This is empty by default.
+#  <'htpasswd encoded usernames / passwords'>:
+#   Use 'htpasswd -n -b "username" "password" | base64 -w0' to create the LS_WEB_USER if you want to manually deploy the sensor.
+#   Example: 'htpasswd -n -b "sensor" "sensor" | base64 -w0' will print c2Vuc29yOiRhcHIxJGVpMHdzUmdYJHNyWHF4UG53ZzZqWUc3aEFaUWxrWDEKCg==
+#   Copy the string and replace / add LS_WEB_USER=c2Vuc29yOiRhcHIxJGVpMHdzUmdYJHNyWHF4UG53ZzZqWUc3aEFaUWxrWDEKCg==
+#   Multiple users are possible:
+#   LS_WEB_USER=c2Vuc29yMTokYXByMSQ5aXhNRk5yMCR6d3F2dGFwQ2x0cFBhU1pqMm9ZemYxCgo= c2Vuc29yMjokYXByMSRtYTlOS1J2NCQvU3dsVVBMeW5RaVIyM3pyWVAzOUkwCgo=
+LS_WEB_USER=
+
+# T-Pot Blackhole
+#  ENABLED: T-Pot will download a db of known mass scanners and nullroute them.
+#           Be aware, this will put T-Pot off the map for stealth reasons and
+#           you will get less traffic. Routes will be active until next reboot
+#           and will be re-added with every T-Pot start until disabled.
+#  DISABLED: This is the default and no stealth efforts are in place.
+TPOT_BLACKHOLE=DISABLED
+
+# T-Pot Persistence
+#  on: This is the default. T-Pot will keep the honeypot logfiles and rotate
+#      with logrotate for 30 days.
+#  off: This is recommended for Raspberry Pi or setups with weaker CPUs or
+#       if you just do not need any of the logfiles.
+TPOT_PERSISTENCE=on
+
+# T-Pot Type
+#  HIVE: This is the default and offers everything to connect T-Pot sensors.
+#  SENSOR: This needs to be used when running a sensor. Be aware to adjust all other
+#          settings as well.
+#          1. You will need to copy compose/sensor.yml to ./docker-comopose.yml
+#          2. From HIVE host you will need to copy ~/tpotce/data/nginx/cert/nginx.crt to
+#             your SENSOR host to ~/tpotce/data/hive.crt
+#          3. On HIVE: Create a web user per SENSOR on HIVE and provide credentials below
+#             Create credentials with 'htpasswd ~/tpotce/data/nginx/conf/lswebpasswd <username>'
+#          4. On SENSOR: Provide username / password from (3) for TPOT_HIVE_USER as base64 encoded string:
+#                        "echo -n 'username:password' | base64 -w0"
+TPOT_TYPE=HIVE
+
+# T-Pot Hive User (only relevant for SENSOR deployment)
+#  <empty>: This is empty by default.
+#  <base64 encoded string>: Provide a base64 encoded string "echo -n 'username:password' | base64 -w0"
+#                           i.e. TPOT_HIVE_USER='dXNlcm5hbWU6cGFzc3dvcmQ='
+TPOT_HIVE_USER=
+
+# T-Pot Hive IP (only relevant for SENSOR deployment)
+#  <empty>: This is empty by default.
+#  <IP, FQDN>: This can be either a IP (i.e. 192.168.1.1) or a FQDN (i.e. foo.bar.local)
+TPOT_HIVE_IP=
+
+# T-Pot AttackMap Text Output
+#  ENABLED: This is the default and the docker container map_data will print events to the console.
+#  DISABLED: Printing events to the console is disabled.
+TPOT_ATTACKMAP_TEXT=ENABLED
+
+# T-Pot AttackMap Text Output Timezone
+#  UTC: (T-Pot default) This is usually the best option.
+#  Continent/City: In Linux you can check our timezone with `readlink` /etc/localtime or
+#                  see the full list here: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
+#  Examples: America/New_York, Asia/Taipei, Australia/Melbourne, Europe/Athens, Europe/Berlin
+TPOT_ATTACKMAP_TEXT_TIMEZONE=UTC
+
+###################################################################################
+# Honeypots / Tools settings
+###################################################################################
+# Some services / tools offer adjustments using ENVs which can be adjusted here.
+###################################################################################
+
+# Suricata ET Pro ruleset
+#  OPEN: This is the default and will the ET Open ruleset
+#  OINKCODE: Replace OPEN with your Oinkcode to use the ET Pro ruleset
+OINKCODE=OPEN
+
+
+###################################################################################
+# NEVER MAKE CHANGES TO THIS SECTION UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!!! #
+###################################################################################
+
+# docker.sock Path
+TPOT_DOCKER_SOCK=/var/run/docker.sock
+
+# docker compose .env
+TPOT_DOCKER_ENV=./.env
+
+# Docker-Compose file
+TPOT_DOCKER_COMPOSE=./docker-compose.yml
+
+# T-Pot Docker Repo
+#  Depending on where you are located you may choose between DockerHub and GHCR
+#  dtagdevsec: This will use the DockerHub image registry
+#  ghcr.io/telekom-security: This will use the GitHub container registry
+TPOT_REPO=dtagdevsec
+
+# T-Pot Version Tag
+TPOT_VERSION=24.04
+
+# T-Pot Pull Policy
+#  always: (T-Pot default) Compose implementations SHOULD always pull the image from the registry.
+#  never: Compose implementations SHOULD NOT pull the image from a registry and SHOULD rely on the platform cached image.
+#  missing: Compose implementations SHOULD pull the image only if it's not available in the platform cache.
+#  build: Compose implementations SHOULD build the image. Compose implementations SHOULD rebuild the image if already present.
+TPOT_PULL_POLICY=always
+
+# T-Pot Data Path
+TPOT_DATA_PATH=./data
+
+# OSType (linux, mac, win)
+#  Most docker features are available on linux
+TPOT_OSTYPE=linux

.github/ISSUE_TEMPLATE/bug-report-for-t-pot.md

@@ -1,37 +1,42 @@
 ---
-name: Bug report for T-Pot
+name: Bug report for T-Pot 24.04.x
-about: Bug report for T-Pot
+about: Bug report for T-Pot 24.04.x
 title: ''
 labels: ''
 assignees: ''
 
 ---
 
-Before you post your issue make sure it has not been answered yet and provide `basic support information` if you come to the conclusion it is a new issue.
+# Successfully raise an issue
+Before you post your issue make sure it has not been answered yet and provide **⚠️ BASIC SUPPORT INFORMATION** (as requested below) if you come to the conclusion it is a new issue.
 
 - 🔍 Use the [search function](https://github.com/dtag-dev-sec/tpotce/issues?utf8=%E2%9C%93&q=) first
-- 🧐 Check our [WIKI](https://github.com/dtag-dev-sec/tpotce/wiki)
+- 🧐 Check our [Wiki](https://github.com/dtag-dev-sec/tpotce/wiki) and the [discussions](https://github.com/telekom-security/tpotce/discussions)
-- 📚 Consult the documentation of 💻 [Debian](https://www.debian.org/doc/), 🐳 [Docker](https://docs.docker.com/), the 🦌 [ELK stack](https://www.elastic.co/guide/index.html) and the 🍯 [T-Pot Readme](https://github.com/dtag-dev-sec/tpotce/blob/master/README.md).
+- 📚 Consult the documentation of 💻 your Linux OS, 🐳 [Docker](https://docs.docker.com/), the 🦌 [Elastic stack](https://www.elastic.co/guide/index.html) and the 🍯 [T-Pot Readme](https://github.com/dtag-dev-sec/tpotce/blob/master/README.md).
-- **⚠️ Provide [basic support information](#info) or similiar information with regard to your issue or we can not help you and will close the issue without further notice**
+- **⚠️ Provide [BASIC SUPPORT INFORMATION](#-basic-support-information-commands-are-expected-to-run-as-root) or similar detailed information with regard to your issue or we will close the issue or convert it into a discussion without further interaction from the maintainers**.<br>
 
-<br>
+# ⚠️ Basic support information (commands are expected to run as `root`)
-<br>
-<br>
 
-<a name="info"></a>
+**We happily take the time to improve T-Pot and take care of things, but we need you to take the time to create an issue that provides us with all the information we need.** 
-## ⚠️ Basic support information (commands are expected to run as `root`)
 
-- What version of the OS are you currently using `lsb_release -a` and `uname -a`?
+- What OS are you T-Pot running on?
-- What T-Pot version are you currently using?
+- What is the version of the OS `lsb_release -a` and `uname -a`?
-- What edition (Standard, Nextgen, etc.) of T-Pot are you running?
+- What T-Pot version are you currently using (only **T-Pot 24.04.x** is currently supported)?
 - What architecture are you running on (i.e. hardware, cloud, VM, etc.)?
-- Did you have any problems during the install? If yes, please attach `/install.log` `/install.err`.
+- Review the `~/install_tpot.log`, attach the log and highlight the errors.
 - How long has your installation been running?
+  - If it is a fresh install consult the documentation first.
+  - Most likely it is a port conflict or a remote dependency was unavailable.
+  - Retry a fresh installation and only open the issue if the error keeps coming up and is not resolved using the documentation as described [here](#how-to-raise-an-issue).  
 - Did you install upgrades, packages or use the update script?
 - Did you modify any scripts or configs? If yes, please attach the changes.
-- Please provide a screenshot of `glances` and `htop`.
+- Please provide a screenshot of `htop` and `docker stats`.
 - How much free disk space is available (`df -h`)?
 - What is the current container status (`dps.sh`)?
-- What is the status of the T-Pot service (`systemctl status tpot`)?
+- On Linux: What is the status of the T-Pot service (`systemctl status tpot`)?
-- What ports are being occupied? Stop T-Pot `systemctl stop tpot` and run `netstat -tulpen`
+- What ports are being occupied? Stop T-Pot `systemctl stop tpot` and run `grc netstat -tulpen`
+  - Stop T-Pot `systemctl stop tpot`
+  - Run `grc netstat -tulpen`
+  - Run T-Pot manually with `docker compose -f ~/tpotce/docker-compose.yml up` and check for errors
+  - Stop execution with `CTRL-C` and `docker compose -f ~/tpotce/docker-compose.yml down -v`
 - If a single container shows as `DOWN` you can run `docker logs <container-name>` for the latest log entries

.github/ISSUE_TEMPLATE/feature-request-for-t-pot.md

@@ -1,6 +1,6 @@
 ---
-name: Feature request for T-Pot
+name: Feature request for T-Pot 24.04.x
-about: Suggest an idea for T-Pot
+about: Suggest an idea for T-Pot 24.04.x
 title: ''
 labels: ''
 assignees: ''

.github/ISSUE_TEMPLATE/general-issue-for-t-pot.md

@@ -1,39 +1,42 @@
 ---
-name: General issue for T-Pot
+name: General issue for T-Pot 24.04.x
-about: General issue for T-Pot
+about: General issue for T-Pot 24.04.x
 title: ''
 labels: ''
 assignees: ''
 
 ---
 
-🗨️ Please post your questions in [Discussions](https://github.com/telekom-security/tpotce/discussions) and keep the issues for **issues**. Thank you 😁.<br>
+# Successfully raise an issue
-
+Before you post your issue make sure it has not been answered yet and provide **⚠️ BASIC SUPPORT INFORMATION** (as requested below) if you come to the conclusion it is a new issue.
-Before you post your issue make sure it has not been answered yet and provide `basic support information` if you come to the conclusion it is a new issue.
 
 - 🔍 Use the [search function](https://github.com/dtag-dev-sec/tpotce/issues?utf8=%E2%9C%93&q=) first
-- 🧐 Check our [WIKI](https://github.com/dtag-dev-sec/tpotce/wiki)
+- 🧐 Check our [Wiki](https://github.com/dtag-dev-sec/tpotce/wiki) and the [discussions](https://github.com/telekom-security/tpotce/discussions)
-- 📚 Consult the documentation of 💻 [Debian](https://www.debian.org/doc/), 🐳 [Docker](https://docs.docker.com/), the 🦌 [ELK stack](https://www.elastic.co/guide/index.html) and the 🍯 [T-Pot Readme](https://github.com/dtag-dev-sec/tpotce/blob/master/README.md).
+- 📚 Consult the documentation of 💻 your Linux OS, 🐳 [Docker](https://docs.docker.com/), the 🦌 [Elastic stack](https://www.elastic.co/guide/index.html) and the 🍯 [T-Pot Readme](https://github.com/dtag-dev-sec/tpotce/blob/master/README.md).
-- **⚠️ Provide [basic support information](#info) or similiar information with regard to your issue or we can not help you and will close the issue without further notice**
+- **⚠️ Provide [BASIC SUPPORT INFORMATION](#-basic-support-information-commands-are-expected-to-run-as-root) or similar detailed information with regard to your issue or we will close the issue or convert it into a discussion without further interaction from the maintainers**.<br>
 
-<br>
+# ⚠️ Basic support information (commands are expected to run as `root`)
-<br>
-<br>
 
-<a name="info"></a>
+**We happily take the time to improve T-Pot and take care of things, but we need you to take the time to create an issue that provides us with all the information we need.** 
-## ⚠️ Basic support information (commands are expected to run as `root`)
 
-- What version of the OS are you currently using `lsb_release -a` and `uname -a`?
+- What OS are you T-Pot running on?
-- What T-Pot version are you currently using?
+- What is the version of the OS `lsb_release -a` and `uname -a`?
-- What edition (Standard, Nextgen, etc.) of T-Pot are you running?
+- What T-Pot version are you currently using (only **T-Pot 24.04.x** is currently supported)?
 - What architecture are you running on (i.e. hardware, cloud, VM, etc.)?
-- Did you have any problems during the install? If yes, please attach `/install.log` `/install.err`.
+- Review the `~/install_tpot.log`, attach the log and highlight the errors.
 - How long has your installation been running?
+  - If it is a fresh install consult the documentation first.
+  - Most likely it is a port conflict or a remote dependency was unavailable.
+  - Retry a fresh installation and only open the issue if the error keeps coming up and is not resolved using the documentation as described [here](#how-to-raise-an-issue).  
 - Did you install upgrades, packages or use the update script?
 - Did you modify any scripts or configs? If yes, please attach the changes.
-- Please provide a screenshot of `glances` and `htop`.
+- Please provide a screenshot of `htop` and `docker stats`.
 - How much free disk space is available (`df -h`)?
 - What is the current container status (`dps.sh`)?
-- What is the status of the T-Pot service (`systemctl status tpot`)?
+- On Linux: What is the status of the T-Pot service (`systemctl status tpot`)?
-- What ports are being occupied? Stop T-Pot `systemctl stop tpot` and run `netstat -tulpen`
+- What ports are being occupied? Stop T-Pot `systemctl stop tpot` and run `grc netstat -tulpen`
+  - Stop T-Pot `systemctl stop tpot`
+  - Run `grc netstat -tulpen`
+  - Run T-Pot manually with `docker compose -f ~/tpotce/docker-compose.yml up` and check for errors
+  - Stop execution with `CTRL-C` and `docker compose -f ~/tpotce/docker-compose.yml down -v`
 - If a single container shows as `DOWN` you can run `docker logs <container-name>` for the latest log entries

.gitignore

@@ -0,0 +1,5 @@
+# Ignore data folder
+data/
+**/.DS_Store
+.idea
+install_tpot.log

CHANGELOG.md

@@ -1,45 +1,36 @@
 # Release Notes / Changelog
-T-Pot 22.04.0 is probably the most feature rich release ever provided with long awaited (wanted!) features readily available after installation. 
+T-Pot 24.04.0 marks probably the largest change in the history of the project. While most of the changes have been made to the underlying platform some changes will be standing out in particular - a T-Pot ISO image will no longer be provided with the benefit that T-Pot will now run on multiple Linux distributions (Alma Linux, Debian, Fedora, OpenSuse, Raspbian, Rocky Linux, Ubuntu), Raspberry Pi (optimized) and macOS / Windows (limited).
 
 ## New Features
-* **Distributed** Installation with **HIVE** and **HIVE_SENSOR**
+* **Distributed** Installation is now using NGINX reverse proxy instead of SSH to transmit **HIVE_SENSOR** logs to **HIVE**
-* **ARM64** support for all provided Docker images
+* **`deploy.sh`**, will make the deployment of sensor much easier and will automatically take care of the configuration. You only have to install the T-Pot sensor.  
-* **GeoIP Attack Map** visualizing Live Attacks on a dedicated webpage
+* **T-Pot Init** is the foundation for running T-Pot on multiple Linux distributions and will also ensure to restart containers with failed healthchecks using **autoheal**
-* **Kibana Live Attack Map** visualizing Live Attacks from different **HIVE_SENSORS**
+* **T-Pot Installer** is now mostly Ansible based providing a universal playbook for the most common Linux distributions 
-* **Blackhole** is a script trying to avoid mass scanner detection 
+* **T-Pot Uninstaller** allows to uninstall T-Pot, while not recommended for general usage, this comes in handy for testing purposes
-* **Elasticvue** a web front end for browsing and interacting with an Elastic Search cluster
+* **T-Pot Customizer (`compose/customizer.py`)** is here to assist you in the creation of a customized `docker-compose.yml`
-* **Ddospot** a honeypot for tracking and monitoring UDP-based Distributed Denial of Service (DDoS) attacks
+* **T-Pot Landing Page** has been redesigned and simplified
-* **Endlessh** is a SSH tarpit that very slowly sends an endless, random SSH banner
+![T-Pot-WebUI](doc/tpotwebui.png)
-* **HellPot** is an endless honeypot based on Heffalump that sends unruly HTTP bots to hell
+* **Kibana Dashboards, Objects** fully refreshed in favor of Lens based objects
-* **qHoneypots** 25 honeypots in a single container for monitoring network traffic, bots activities, and username \ password credentials
+![Dashbaord](doc/kibana_a.png)
-* **Redishoneypot** is a honeypot mimicking some of the Redis' functions
+* **Wordpot** is added as new addition to the available honeypots within T-Pot and will run on `tcp/8080` by default.
-* **SentryPeer** a dedicated SIP honeypot
+* **Raspberry Pi** is now supported using a dedicated `mobile.yml` (why this is called mobile will be revealed soon!)
-* **Index Lifecycle Management** for Elasticseach indices is now being used
+* **GeoIP Attack Map** is now aware of connects / disconnects and thus eliminating required reloads
-
+* **Docker**, where possible, will now be installed directly from the Docker repositories to avoid any incompatibilities
-## Upgrades
+* **`.env`** now provides a single configuration file for the T-Pot related settings
-* **Debian 11.x** is now being used for the T-Pot ISO images and required for post installs
+* **`genuser.sh`** can now be used to add new users to the T-Pot Landing Page as part of the T-Pot configuration file (`.env`)
-* **Elastic Stack 8.x** is now provided as Docker images
 
 ## Updates
-* **Honeypots** and **tools** were updated to their latest masters and releases
+* **Honeypots** and **tools** were updated to their latest pushed code and / or releases
+* Where possible Docker Images will now use Alpine 3.19
 * Updates will be provided continuously through Docker Images updates 
 
 ## Breaking Changes
-* For security reasons all Py2.x honeypots with the need of PyPi packages have been removed: **HoneyPy**, **HoneySAP** and **RDPY**
+* There is no option to migrate a previous installation to T-Pot 24.04.0, you can try to transfer the old `data` folder to the new T-Pot installation, but a working environment depends on too many other factors outside of our control and a new installation is simply faster.
-* If you are upgrading from a previous version of T-Pot (20.06.x) you need to import the new Kibana objects or some of the functionality will be broken or will be unavailabe
+* Most of the support scripts were moved into the **T-Pot Init** image and are no longer available directly on the host.
-* **Cyberchef** is now part of the Nginx Docker image, no longer as individual image
+* Cockpit is no longer available as part of T-Pot itself. However, where supported, you can simply install the `cockpit` package.
-* **ElasticSearch Head** is superseded by **Elasticvue** and part the Nginx Docker image
-* **Heimdall** is no longer supported and superseded with a new Bento based landing page
-* **Elasticsearch Curator** is no longer supprted and superseded with **Index Lifecycle Policies** available through Kibana.
 
 # Thanks & Credits
-* @ghenry, for some fun late night debugging and of course SentryPeer!
-* @giga-a, for adding much appreciated features (i.e. JSON logging, 
-X-Forwarded-For, etc.) and of course qHoneypots! 
 * @sp3t3rs, @trixam, for their backend and ews support!
-* @tadashi-oya, for spotting some errors and propose fixes!
+* @shark4ce for taking the time to test, debug and offer a solution #1472.
-* @tmariuss, @shaderecker for their cloud contributions!
-* @vorband, for much appreciated and helpful insights regarding the GeoIP Attack Map!
-* @yunginnanet, on not giving up on squashing a bug and of course Hellpot!
 
 ... and many others from the T-Pot community by opening valued issues and discussions, suggesting ideas and thus helping to improve T-Pot!

CITATION.cff

@@ -2,7 +2,7 @@
 # Visit https://bit.ly/cffinit to generate yours today!
 
 cff-version: 1.2.0
-title: T-Pot
+title: T-Pot 24.04.0
 message: >-
   If you use this software, please cite it using the
   metadata from this file.
@@ -20,8 +20,8 @@ authors:
 identifiers:
   - type: url
     value: >-
-      https://github.com/telekom-security/tpotce/releases/tag/22.04.0
+      https://github.com/telekom-security/tpotce/releases/tag/24.04.0
-    description: T-Pot Release 22.04.0
+    description: T-Pot Release 24.04.0
 repository-code: 'https://github.com/telekom-security/tpotce'
 abstract: >-
   T-Pot is the all in one, optionally distributed, multiarch
@@ -38,6 +38,6 @@ keywords:
   - docker
   - elk
 license: GPL-3.0
-commit: af09aa96b184f873ec83da4e7380762a0a5ce416
+commit: release
-version: 22.04.0
+version: 24.04.0
-date-released: '2022-04-12'
+date-released: '2024-04-22'

SECURITY.md

@@ -3,18 +3,21 @@
 ## Supported Versions
 
 | Version | Supported          |
-| -------   | ------------------ |
+|-------|--------------------|
-| 22.04.x   | :white_check_mark: |
+| 24.04 | :white_check_mark: |
 
 
 ## Reporting a Vulnerability
 
-We take security of T-Pot very seriously. If one of T-Pot's components is affected, it is most likely that a upstream component we rely on is involved, such as a honeypot, docker image, tool or package. Together we will find the best possible way to remedy the situation.
+We prioritize the security of T-Pot highly. Often, vulnerabilities in T-Pot components stem from upstream dependencies, including honeypots, Docker images, tools, or packages. We are committed to working together to resolve any issues effectively.
 
-Before you submit a possible vulnerability, please ensure you have done the following:
+Please follow these steps before reporting a potential vulnerability:
-1. You have checked the documentation, issues and discussions if the detected behavior is typical and does not revolve around other issues. I.e. Cowrie will be detected with outgoing conncection requests or T-Pot opening all possible TCP ports which Honeytrap enabled install flavors will do as a feature.
-2. You have identified the vulnerable component and isolated your finding (honeypot, docker image, tool, package, etc.).
-3. You have a detailed description including log files, possibly debug files, with all steps necessary for us to reproduce / trigger the behaviour or vulnerability. At best you already have a possible solution, hotfix, fix or patch to remedy the situation and want to submit a PR. 
-4. You have checked if the possible vulnerability is known upstream. If a fix / patch is already available, please provide the necessary info.
 
-We will get back to you as fast as possible. In case you think this is an emergency for the whole T-Pot community feel free to speed things up by **responsibly** informing our [CERT](https://www.telekom.com/en/corporate-responsibility/data-protection-data-security/security/details/introducing-deutsche-telekom-cert-358316).
+1. Verify that the behavior you've observed isn't already documented as a normal aspect or unrelated issue of T-Pot. For example, Cowrie may initiate outgoing connections, or T-Pot might open all possible TCP ports—a feature enabled by Honeytrap.
+2. Clearly identify which component is vulnerable (e.g., a specific honeypot, Docker image, tool, package) and isolate the issue.
+3. Provide a detailed description of the issue, including log and, if available, debug files. Include all steps necessary to reproduce the vulnerability. If you have a proposed solution, hotfix, or patch, please be prepared to submit a pull request (PR).
+4. Check whether the vulnerability is already known upstream. If there is an existing fix or patch, include that information in your report.
+
+This approach ensures a thorough and efficient resolution process.
+
+We aim to respond as quickly as possible. If you believe the issue poses an immediate threat to the entire T-Pot community, you can expedite the process by responsibly alerting our [CERT](https://www.telekom.com/en/corporate-responsibility/data-protection-data-security/security/details/introducing-deutsche-telekom-cert-358316).

bin/2fa.sh

@@ -1,77 +0,0 @@
-#!/bin/bash
-
-# Make sure script is started as non-root.
-myWHOAMI=$(whoami)
-if [ "$myWHOAMI" = "root" ]
-  then
-    echo "Need to run as non-root ..."
-    echo ""
-    exit
-fi
-
-# set vars, check deps
-myPAM_COCKPIT_FILE="/etc/pam.d/cockpit"
-if ! [ -s "$myPAM_COCKPIT_FILE" ];
-  then
-    echo "### Cockpit PAM module config does not exist. Something went wrong."
-    echo ""
-    exit 1
-fi
-myPAM_COCKPIT_GA="
-
-# google authenticator for two-factor
-auth required pam_google_authenticator.so
-"
-myAUTHENTICATOR=$(which google-authenticator)
-if [ "$myAUTHENTICATOR" == "" ];
-  then
-    echo "### Could not locate google-authenticator, trying to install (if asked provide root password)."
-    echo ""
-    sudo apt-get update
-    sudo apt-get install -y libpam-google-authenticator
-    exec "$1" "$2"    
-    exit 1
-fi
-
-
-# write PAM changes 
-function fuWRITE_PAM_CHANGES {
-  myCHECK=$(cat $myPAM_COCKPIT_FILE | grep -c "google")
-  if ! [ "$myCHECK" == "0" ];
-    then
-      echo "### PAM config already enabled. Skipped."
-      echo ""
-    else
-      echo "### Updating PAM config for Cockpit (if asked provide root password)."
-      echo "$myPAM_COCKPIT_GA" | sudo tee -a $myPAM_COCKPIT_FILE
-      sudo systemctl restart cockpit
-  fi
-}
-
-# create 2fa
-function fuGEN_TOKEN {
-  echo "### Now generating token for Google Authenticator."
-  echo ""
-  google-authenticator -t -d -r 3 -R 30 -w 17
-}
-
-
-# main
-echo "### This script will enable Two Factor Authentication for Cockpit."
-echo ""
-echo "### Please download one of the many authenticator apps from the appstore of your choice."
-echo ""
-while true;
-  do
-    read -p "### Ready to start (y/n)? " myANSWER
-    case $myANSWER in
-      [Yy]* ) echo "### OK. Starting ..."; break;;
-      [Nn]* ) echo "### Exiting."; exit;;
-    esac
-done
-
-fuWRITE_PAM_CHANGES
-fuGEN_TOKEN
-
-echo "Done. Re-run this script by every user who needs Cockpit access."
-echo ""

bin/backup_es_folders.sh

@@ -1,61 +0,0 @@
-#!/bin/bash
-# Run as root only.
-myWHOAMI=$(whoami)
-if [ "$myWHOAMI" != "root" ];
-  then
-    echo "Need to run as root ..."
-    exit
-fi
-
-if [ "$1" == "" ] || [ "$1" != "all" ] && [ "$1" != "base" ];
-  then
-    echo "Usage: backup_es_folders [all, base]"
-    echo "       all  = backup all ES folder"
-    echo "       base = backup only Kibana index".
-    echo
-    exit
-fi
-
-# Backup all ES relevant folders
-# Make sure ES is available
-myES="http://127.0.0.1:64298/"
-myESSTATUS=$(curl -s -XGET ''$myES'_cluster/health' | jq '.' | grep -c green)
-if ! [ "$myESSTATUS" = "1" ]
-  then
-    echo "### Elasticsearch is not available, try starting via 'systemctl start tpot'."
-    exit
-  else
-    echo "### Elasticsearch is available, now continuing."
-    echo
-fi
-
-# Set vars
-myCOUNT=1
-myDATE=$(date +%Y%m%d%H%M)
-myELKPATH="/data/elk/data"
-myKIBANAINDEXNAME=$(curl -s -XGET ''$myES'_cat/indices/.kibana' | awk '{ print $4 }')
-myKIBANAINDEXPATH=$myELKPATH/indices/$myKIBANAINDEXNAME
-
-# Let's ensure normal operation on exit or if interrupted ...
-function fuCLEANUP {
-  ### Start ELK
-  systemctl start tpot
-  echo "### Now starting T-Pot ..."
-}
-trap fuCLEANUP EXIT
-
-# Stop T-Pot to lift db lock
-echo "### Now stopping T-Pot"
-systemctl stop tpot
-sleep 2
-
-# Backup DB in 2 flavors
-echo "### Now backing up Elasticsearch folders ..."
-if [ "$1" == "all" ];
-  then
-    tar cvfz "elkall_"$myDATE".tgz" $myELKPATH
-elif [ "$1" == "base" ];
-  then
-    tar cvfz "elkbase_"$myDATE".tgz" $myKIBANAINDEXPATH
-fi
-

bin/dps.sh

@@ -1,73 +0,0 @@
-#!/bin/bash
-
-# Run as root only.
-myWHOAMI=$(whoami)
-if [ "$myWHOAMI" != "root" ]
-  then
-    echo "Need to run as root ..."
-    exit
-fi
-
-myPARAM="$1"
-if [[ $myPARAM =~ ^([1-9]|[1-9][0-9]|[1-9][0-9][0-9])$ ]];
-  then
-    watch --color -n $myPARAM "$0"
-    exit
-fi
-
-# Show current status of T-Pot containers
-myCONTAINERS="$(cat /opt/tpot/etc/tpot.yml | grep -v '#' | grep container_name | cut -d: -f2 | sort | tr -d " ")"
-myRED=""
-myGREEN=""
-myBLUE=""
-myWHITE=""
-myMAGENTA=""
-
-# Blackhole Status
-myBLACKHOLE_STATUS=$(ip r | grep "blackhole" -c)
-if [ "$myBLACKHOLE_STATUS" -gt "500" ];
-  then
-    myBLACKHOLE_STATUS="${myGREEN}ENABLED"
-  else
-    myBLACKHOLE_STATUS="${myRED}DISABLED"
-fi
-
-function fuGETTPOT_STATUS {
-# T-Pot Status
-myTPOT_STATUS=$(systemctl status tpot | grep "Active" | awk '{ print $2 }')
-if [ "$myTPOT_STATUS" == "active" ];
-  then
-    echo "${myGREEN}ACTIVE"
-  else
-    echo "${myRED}INACTIVE"
-fi
-}
-
-function fuGETSTATUS {
-grc --colour=on docker ps -f status=running -f status=exited --format "table {{.Names}}\t{{.Status}}\t{{.Ports}}" | grep -v "NAME" | sort
-}
-
-function fuGETSYS {
-printf "[ ========| System |======== ]\n"
-printf "${myBLUE}%+11s ${myWHITE}%-20s\n" "DATE: " "$(date)"
-printf "${myBLUE}%+11s ${myWHITE}%-20s\n" "UPTIME: " "$(grc --colour=on uptime)"
-printf "${myMAGENTA}%+11s %-20s\n" "T-POT: " "$(fuGETTPOT_STATUS)"
-printf "${myMAGENTA}%+11s %-20s\n" "BLACKHOLE: " "$myBLACKHOLE_STATUS${myWHITE}"
-echo
-}
-
-    myDPS=$(fuGETSTATUS)
-    myDPSNAMES=$(echo "$myDPS" | awk '{ print $1 }' | sort)
-    fuGETSYS
-    printf "%-21s %-28s %s\n" "NAME" "STATUS" "PORTS"
-    if [ "$myDPS" != "" ];
-      then
-        echo "$myDPS"
-    fi
-    for i in $myCONTAINERS; do
-      myAVAIL=$(echo "$myDPSNAMES" | grep -o "$i" | uniq | wc -l)      	    
-      if [ "$myAVAIL" = "0" ];
-	then
-	  printf "%-28s %-28s\n" "$myRED$i" "DOWN$myWHITE"
-      fi
-    done

bin/tpdclean.sh

@@ -1,29 +0,0 @@
-#!/bin/bash
-# T-Pot Compose and Container Cleaner
-# Set colors
-myRED=""
-myGREEN=""
-myWHITE=""
-
-# Only run with command switch
-if [ "$1" != "-y" ]; then
-  echo $myRED"### WARNING"$myWHITE
-  echo ""
-  echo $myRED"###### This script is only intended for the tpot.service."$myWHITE
-  echo $myRED"###### Run <systemctl stop tpot> first and then <tpdclean.sh -y>."$myWHITE
-  echo $myRED"###### Be aware, all T-Pot container volumes and images will be removed."$myWHITE
-  echo ""
-  echo $myRED"### WARNING "$myWHITE
-  echo
-  exit
-fi
-
-# Remove old containers, images and volumes
-docker-compose -f /opt/tpot/etc/tpot.yml down -v >> /dev/null 2>&1
-docker-compose -f /opt/tpot/etc/tpot.yml rm -v >> /dev/null 2>&1
-docker network rm $(docker network ls -q) >> /dev/null 2>&1
-docker volume rm $(docker volume ls -q) >> /dev/null 2>&1
-docker rm -v $(docker ps -aq) >> /dev/null 2>&1
-docker rmi $(docker images | grep "<none>" | awk '{print $3}') >> /dev/null 2>&1
-docker rmi $(docker images | grep "2203" | awk '{print $3}') >> /dev/null 2>&1
-exit 0

bin/tped.sh

@@ -1,56 +0,0 @@
-#!/bin/bash
-
-# Run as root only.
-myWHOAMI=$(whoami)
-if [ "$myWHOAMI" != "root" ]
-  then
-    echo "Need to run as root ..."
-    exit
-fi
-
-# set backtitle, get filename
-myBACKTITLE="T-Pot Edition Selection Tool"
-myYMLS=$(cd /opt/tpot/etc/compose/ && ls -1 *.yml)
-myLINK="/opt/tpot/etc/tpot.yml"
-
-# Let's load docker images in parallel
-function fuPULLIMAGES {
-local myTPOTCOMPOSE="/opt/tpot/etc/tpot.yml"
-for name in $(cat $myTPOTCOMPOSE | grep -v '#' | grep image | cut -d'"' -f2 | uniq)
-  do
-    docker pull $name &
-  done
-wait
-echo
-}
-
-# setup menu
-for i in $myYMLS;
-  do
-    myITEMS+="$i $(echo $i | cut -d "." -f1 | tr [:lower:] [:upper:]) " 
-done
-myEDITION=$(dialog --backtitle "$myBACKTITLE" --menu "Select T-Pot Edition" 18 50 1 $myITEMS 3>&1 1>&2 2>&3 3>&-)
-if [ "$myEDITION" == "" ];
-  then
-    echo "Have a nice day!"
-    exit
-fi
-dialog --backtitle "$myBACKTITLE" --title "[ Activate now? ]" --yesno "\n$myEDITION" 7 50
-myOK=$?
-if [ "$myOK" == "0" ];
-  then
-    echo "OK - Activating and downloading latest images."
-    systemctl stop tpot
-    if [ "$(docker ps -aq)" != "" ];
-      then
-        docker stop $(docker ps -aq)
-        docker rm $(docker ps -aq)
-    fi
-    rm -f $myLINK
-    ln -s /opt/tpot/etc/compose/$myEDITION $myLINK
-    fuPULLIMAGES
-    systemctl start tpot
-    echo "Done. Use \"dps.sh\" for monitoring"
-  else 
-    echo "Have a nice day!"
-fi

bin/updateip.sh

@@ -1,89 +0,0 @@
-#!/bin/bash
-# Let's add the first local ip to the /etc/issue and external ip to ews.ip file
-# If the external IP cannot be detected, the internal IP will be inherited.
-source /etc/environment
-myCHECKIFSENSOR=$(head -n 1 /opt/tpot/etc/tpot.yml | grep "Sensor" | wc -l)
-myUUID=$(lsblk -o MOUNTPOINT,UUID | grep -e "^/ " | awk '{ print $2 }')
-myLOCALIP=$(hostname -I | awk '{ print $1 }')
-myEXTIP=$(/opt/tpot/bin/myip.sh)
-if [ "$myEXTIP" = "" ];
-  then
-    myEXTIP=$myLOCALIP
-    myEXTIP_LAT="49.865835022498125"
-    myEXTIP_LONG="8.62606472775735"
-  else
-    myEXTIP_LOC=$(curl -s ipinfo.io/$myEXTIP/loc)
-    myEXTIP_LAT=$(echo "$myEXTIP_LOC" | cut -f1 -d",")
-    myEXTIP_LONG=$(echo "$myEXTIP_LOC" | cut -f2 -d",")
-fi
-
-# Load Blackhole routes if enabled 
-myBLACKHOLE_FILE1="/etc/blackhole/mass_scanner.txt"
-myBLACKHOLE_FILE2="/etc/blackhole/mass_scanner_cidr.txt"
-if [ -f "$myBLACKHOLE_FILE1" ] || [ -f "$myBLACKHOLE_FILE2" ];
-  then
-    /opt/tpot/bin/blackhole.sh add
-fi
-
-myBLACKHOLE_STATUS=$(ip r | grep "blackhole" -c)
-if [ "$myBLACKHOLE_STATUS" -gt "500" ];
-  then
-    myBLACKHOLE_STATUS="| BLACKHOLE: [ ENABLED ]"
-  else
-    myBLACKHOLE_STATUS="| BLACKHOLE: [ DISABLED ]"
-fi
-
-mySSHUSER=$(cat /etc/passwd | grep 1000 | cut -d ':' -f1)
-
-# Export
-export myUUID
-export myLOCALIP
-export myEXTIP
-export myEXTIP_LAT
-export myEXTIP_LONG
-export myBLACKHOLE_STATUS
-export mySSHUSER
-
-# Build issue
-echo "" > /etc/issue
-toilet -f ivrit -F metal --filter border:metal "T-Pot   22.04" | sed 's/\\/\\\\/g' >> /etc/issue
-echo >> /etc/issue
-echo ",---- [ \n ] [ \d ] [ \t ]" >> /etc/issue
-echo "|" >> /etc/issue
-echo "| IP: $myLOCALIP ($myEXTIP)" >> /etc/issue
-echo "| SSH: ssh -l tsec -p 64295 $myLOCALIP" >> /etc/issue 
-if [ "$myCHECKIFSENSOR" == "0" ];
-  then
-    echo "| WEB: https://$myLOCALIP:64297" >> /etc/issue
-fi
-echo "| ADMIN: https://$myLOCALIP:64294" >> /etc/issue
-echo "$myBLACKHOLE_STATUS" >> /etc/issue
-echo "|" >> /etc/issue
-echo "\`----" >> /etc/issue
-echo >> /etc/issue
-tee /data/ews/conf/ews.ip << EOF
-[MAIN]
-ip = $myEXTIP
-EOF
-tee /opt/tpot/etc/compose/elk_environment << EOF
-HONEY_UUID=$myUUID
-MY_EXTIP=$myEXTIP
-MY_EXTIP_LAT=$myEXTIP_LAT
-MY_EXTIP_LONG=$myEXTIP_LONG
-MY_INTIP=$myLOCALIP
-MY_HOSTNAME=$HOSTNAME
-EOF
-
-if [ -s "/data/elk/logstash/ls_environment" ];
-  then
-    source /data/elk/logstash/ls_environment
-    tee -a /opt/tpot/etc/compose/elk_environment << EOF
-MY_TPOT_TYPE=$MY_TPOT_TYPE
-MY_SENSOR_PRIVATEKEYFILE=$MY_SENSOR_PRIVATEKEYFILE
-MY_HIVE_USERNAME=$MY_HIVE_USERNAME
-MY_HIVE_IP=$MY_HIVE_IP
-EOF
-fi
-
-chown tpot:tpot /data/ews/conf/ews.ip
-chmod 770 /data/ews/conf/ews.ip

cloud/.gitignore

@@ -1,10 +0,0 @@
-# Ansible
-*.retry
-
-# Terraform
-**/.terraform
-**/terraform.*
-
-# OpenStack clouds
-**/clouds.yaml
-**/secure.yaml

cloud/ansible/README.md

@@ -1,257 +0,0 @@
-# T-Pot Ansible
-
-Here you can find a ready-to-use solution for your automated T-Pot deployment using [Ansible](https://www.ansible.com/).  
-It consists of an Ansible Playbook with multiple roles, which is reusable for all [OpenStack](https://www.openstack.org/) based clouds (e.g. Open Telekom Cloud, Orange Cloud, Telefonica Open Cloud, OVH) out of the box.  
-Apart from that you can easily adapt the deploy role to use other [cloud providers](https://docs.ansible.com/ansible/latest/scenario_guides/cloud_guides.html). Check out [Ansible Galaxy](https://galaxy.ansible.com/search?keywords=&order_by=-relevance&page=1&deprecated=false&type=collection&tags=cloud) for more cloud collections.
-
-The Playbook first creates all resources (security group, network, subnet, router), deploys one (or more) new servers and then installs and configures T-Pot on them.
-
-This example showcases the deployment on our own OpenStack based Public Cloud Offering [Open Telekom Cloud](https://open-telekom-cloud.com/en).
-
-# Table of contents
-- [Preparation of Ansible Master](#ansible-master)
-  - [Ansible Installation](#ansible)
-  - [OpenStack Collection Installation](#collection)
-  - [Agent Forwarding](#agent-forwarding)
-- [Preparations in Open Telekom Cloud Console](#preparation)
-  - [Create new project](#project)
-  - [Create API user](#api-user)
-  - [Import Key Pair](#key-pair)
-- [Clone Git Repository](#clone-git)
-- [Settings and recommended values](#settings)
-  - [clouds.yaml](#clouds-yaml)
-  - [Ansible remote user](#remote-user)
-  - [Number of instances to deploy](#number)
-  - [Instance settings](#instance-settings)
-  - [User password](#user-password)
-  - [Configure `tpot.conf.dist`](#tpot-conf)
-  - [Optional: Custom `ews.cfg`](#ews-cfg)
-  - [Optional: Custom HPFEEDS](#hpfeeds)
-- [Deploying a T-Pot](#deploy)
-- [Further documentation](#documentation)
-
-<a name="ansible-master"></a>
-# Preparation of Ansible Master
-You can either run the Ansible Playbook locally on your Linux or macOS machine or you can use an ECS (Elastic Cloud Server) on Open Telekom Cloud, which I did.  
-I used Ubuntu 18.04 for my Ansible Master Server, but other OSes are fine too.  
-Ansible works over the SSH Port, so you don't have to add any special rules to your Security Group.
-
-<a name="ansible"></a>
-## Ansible Installation
-:warning: Ansible 2.10 or newer is required!
-
-Example for Ubuntu 18.04:  
-
-At first we update the system:  
-`sudo apt update`  
-`sudo apt dist-upgrade`
-
-Then we need to add the repository and install Ansible:  
-`sudo apt-add-repository --yes --update ppa:ansible/ansible`  
-`sudo apt install ansible`
-
-For other OSes and Distros have a look at the official [Ansible Documentation](https://docs.ansible.com/ansible/latest/installation_guide/intro_installation.html).
-
-If your OS does not offer a recent version of Ansible (>= 2.10) you should consider [installing Ansible with pip](https://docs.ansible.com/ansible/latest/installation_guide/intro_installation.html#installing-ansible-with-pip).  
-In short (if you already have Python3/pip3 installed):
-```
-pip3 install ansible
-```
-
-<a name="collection"></a>
-## OpenStack Collection Installation
-For interacting with OpenStack resources in Ansible, you need to install the collection from Ansible Galaxy:  
-`ansible-galaxy collection install openstack.cloud`
-
-<a name="agent-forwarding"></a>
-## Agent Forwarding
-If you run the Ansible Playbook remotely on your Ansible Master Server, Agent Forwarding must be enabled in order to let Ansible connect to newly created machines.  
-- On Linux or macOS:  
-  - Create or edit `~/.ssh/config`
-    ```
-    Host ANSIBLE_MASTER_IP
-    ForwardAgent yes
-    ```
-- On Windows using Putty:  
-![Putty Agent Forwarding](doc/putty_agent_forwarding.png)
-
-<a name="preparation"></a>
-# Preparations in Open Telekom Cloud Console
-(You can skip this if you have already set up a project and an API account with key pair)  
-(Just make sure you know the naming for everything, as you need to configure the Ansible variables.)
-
-Before we can start deploying, we have to prepare the Open Telekom Cloud tenant.  
-For that, go to the [Web Console](https://auth.otc.t-systems.com/authui/login) and log in with an admin user.
-
-<a name="project"></a>
-## Create new project
-I strongly advise you to create a separate project for the T-Pots in your tenant.  
-In my case I named it `tpot`.
-
-![Create new project](doc/otc_1_project.gif)
-
-<a name="api-user"></a>
-## Create API user
-The next step is to create a new user account, which is restricted to the project.  
-This ensures that the API access is limited to that project.
-
-![Create API user](doc/otc_2_user.gif)
-
-<a name="key-pair"></a>
-## Import Key Pair
-:warning: Now log in with the newly created API user account and select your project.
-
-![Login as API user](doc/otc_3_login.gif)
-
-Import your SSH public key.
-
-![Import SSH Public Key](doc/otc_4_import_key.gif)
-
-
-<a name="clone-git"></a>
-# Clone Git Repository
-Clone the `tpotce` repository to your Ansible Master:  
-`git clone https://github.com/telekom-security/tpotce.git`  
-All Ansible related files are located in the [`cloud/ansible/openstack`](openstack) folder.
-
-<a name="settings"></a>
-# Settings and recommended values
-You can configure all aspects of your Elastic Cloud Server and T-Pot before using the Playbook:
-
-<a name="clouds-yaml"></a>
-## clouds.yaml
-Located at [`openstack/clouds.yaml`](openstack/clouds.yaml).  
-Enter your Open Telekom Cloud API user credentials here (username, password, project name, user domain name):  
-```
-clouds:
-  open-telekom-cloud:
-    profile: otc
-    auth:
-      project_name: eu-de_your_project
-      username: your_api_user
-      password: your_password
-      user_domain_name: OTC-EU-DE-000000000010000XXXXX
-```
-You can also perform different authentication methods like sourcing OpenStack OS_* environment variables or providing an inline dictionary.  
-For more information have a look in the [openstack.cloud.server](https://docs.ansible.com/ansible/latest/collections/openstack/cloud/server_module.html) Ansible module documentation.
-
-If you already have your own `clouds.yaml` file or have multiple clouds in there, you can specify which one to use in the `openstack/my_os_cloud.yaml` file:
-```
-# Enter the name of your cloud to use from clouds.yaml
-cloud: open-telekom-cloud
-```
-
-<a name="remote-user"></a>
-## Ansible remote user
-You may have to adjust the `remote_user` in the Ansible Playbook under [`openstack/deploy_tpot.yaml`](openstack/deploy_tpot.yaml) depending on your Debian base image (e.g. on Open Telekom Cloud the default Debian user is `linux`).
-
-<a name="number"></a>
-## Number of instances to deploy
-You can adjust the number of VMs/T-Pots that you want to create in [`openstack/deploy_tpot.yaml`](openstack/deploy_tpot.yaml):
-```
-loop: "{{ range(0, 1) }}"
-```
-One instance is set as the default, increase to your liking.
-
-<a name="instance-settings"></a>
-## Instance settings
-Located at [`openstack/roles/create_vm/vars/main.yaml`](openstack/roles/create_vm/vars/main.yaml).  
-Here you can customize your virtual machine specifications:
-  - Choose an availability zone. For Open Telekom Cloud reference see [here](https://docs.otc.t-systems.com/en-us/endpoint/index.html).
-  - Change the OS image (For T-Pot we need Debian)
-  - (Optional) Change the volume size
-  - Specify your key pair (:warning: Mandatory)
-  - (Optional) Change the instance type (flavor)  
-    `s3.medium.8` corresponds to 1 vCPU and 8GB of RAM and is the minimum required flavor.  
-    A full list of Open Telekom Cloud flavors can be found [here](https://docs.otc.t-systems.com/en-us/usermanual/ecs/en-us_topic_0177512565.html).
-
-```
-availability_zone: eu-de-03
-image: Standard_Debian_10_latest
-volume_size: 128
-key_name: your-KeyPair
-flavor: s3.medium.8
-```
-
-<a name="user-password"></a>
-## User password
-Located at [`openstack/roles/install/vars/main.yaml`](openstack/roles/install/vars/main.yaml).  
-Here you can set the password for your Debian user (**you should definitely change that**).
-```
-user_password: LiNuXuSeRPaSs#
-```
-
-<a name="tpot-conf"></a>
-## Configure `tpot.conf.dist`
-The file is located in [`iso/installer/tpot.conf.dist`](/iso/installer/tpot.conf.dist).  
-Here you can choose:
-  - between the various T-Pot editions
-  - a username for the web interface
-  - a password for the web interface (**you should definitely change that**)
-
-<a name="ews-cfg"></a>
-## Optional: Custom `ews.cfg`
-Enable this by uncommenting the role in the [deploy_tpot.yaml](openstack/deploy_tpot.yaml) playbook.
-```
-#    - custom_ews
-```
-
-You can use a custom config file for `ewsposter`.  
-e.g. when you have your own credentials for delivering data to our [Sicherheitstacho](https://sicherheitstacho.eu/start/main).  
-You can find the `ews.cfg` template file here: [`openstack/roles/custom_ews/templates/ews.cfg`](openstack/roles/custom_ews/templates/ews.cfg) and adapt it for your needs.
-
-For setting custom credentials, these settings would be relevant for you (the rest of the file can stay as is):  
-```
-[MAIN]
-...
-contact = your_email_address
-...
-
-[EWS]
-...
-username = your_username
-token = your_token
-...
-```
-
-<a name="hpfeeds"></a>
-## Optional: Custom HPFEEDS
-Enable this by uncommenting the role in the [deploy_tpot.yaml](openstack/deploy_tpot.yaml) playbook.
-```
-#    - custom_hpfeeds
-```
-
-You can specify custom HPFEEDS in [`openstack/roles/custom_hpfeeds/files/hpfeeds.cfg`](openstack/roles/custom_hpfeeds/files/hpfeeds.cfg).  
-That file contains the defaults (turned off) and you can adapt it for your needs, e.g. for SISSDEN:
-```
-myENABLE=true
-myHOST=hpfeeds.sissden.eu
-myPORT=10000
-myCHANNEL=t-pot.events
-myCERT=/opt/ewsposter/sissden.pem
-myIDENT=your_user
-mySECRET=your_secret
-myFORMAT=json
-```
-
-<a name="deploy"></a>
-# Deploying a T-Pot :honey_pot::honeybee:
-Now, after configuring everything, we can finally start deploying T-Pots!  
-
-Go to the [`openstack`](openstack) folder and run the Ansible Playbook with:  
-`ansible-playbook deploy_tpot.yaml`  
-(Yes, it is as easy as that :smile:)
-
-If you are running on a machine which asks for a sudo password, you can use:  
-`ansible-playbook --ask-become-pass deploy_tpot.yaml`
-
-The Playbook will first install required packages on the Ansible Master and then deploy one (or more) new server instances.  
-After that, T-Pot gets installed and configured on them, optionally custom configs are applied and finally it reboots.
-
-Once this is done, you can proceed with connecting/logging in to the T-Pot according to the [documentation](https://github.com/telekom-security/tpotce#ssh-and-web-access).
-
-<a name="documentation"></a>
-# Further documentation
-- [Ansible Documentation](https://docs.ansible.com/ansible/latest/)
-- [openstack.cloud.server – Create/Delete Compute Instances from OpenStack](https://docs.ansible.com/ansible/latest/collections/openstack/cloud/server_module.html)
-- [Open Telekom Cloud Help Center](https://docs.otc.t-systems.com/)

cloud/ansible/openstack/ansible.cfg

@@ -1,6 +0,0 @@
-[defaults]
-host_key_checking = false
-
-[ssh_connection]
-scp_if_ssh = true
-ssh_args = -o ServerAliveInterval=60

cloud/ansible/openstack/clouds.yaml

@@ -1,9 +0,0 @@
-clouds:
-  open-telekom-cloud:
-    profile: otc
-    region_name: eu-de
-    auth:
-      project_name: eu-de_your_project
-      username: your_api_user
-      password: your_password
-      user_domain_name: OTC-EU-DE-000000000010000XXXXX

cloud/ansible/openstack/deploy_tpot.yaml

@@ -1,30 +0,0 @@
-- name: Check host prerequisites
-  hosts: localhost
-  become: yes
-  roles:
-    - check
-
-- name: Deploy instances
-  hosts: localhost
-  vars_files: my_os_cloud.yaml
-  tasks:
-    - name: Create security group and network
-      ansible.builtin.include_role:
-        name: create_net
-    - name: Create one or more instances
-      ansible.builtin.include_role:
-        name: create_vm
-      loop: "{{ range(0, 1) }}"
-      loop_control:
-        extended: yes
-
-- name: Install T-Pot
-  hosts: tpot
-  remote_user: linux
-  become: yes
-  gather_facts: no
-  roles:
-    - install
-#    - custom_ews
-#    - custom_hpfeeds
-    - reboot

cloud/ansible/openstack/my_os_cloud.yaml

@@ -1,2 +0,0 @@
-# Enter the name of your cloud to use from clouds.yaml
-cloud: open-telekom-cloud

cloud/ansible/openstack/requirements.yaml

@@ -1,2 +0,0 @@
-collections:
-- name: openstack.cloud

cloud/ansible/openstack/roles/check/tasks/main.yaml

@@ -1,19 +0,0 @@
-- name: Install dependencies
-  ansible.builtin.package:
-    name:
-      - gcc
-      - python3-dev
-      - python3-setuptools
-      - python3-pip
-    state: present
-
-- name: Install openstacksdk
-  ansible.builtin.pip:
-    name: openstacksdk
-    executable: pip3
-
-- name: Check if agent forwarding is enabled
-  ansible.builtin.fail:
-    msg: Please enable agent forwarding to allow Ansible to connect to the remote host!
-  ignore_errors: yes
-  failed_when: lookup('env','SSH_AUTH_SOCK') == ""

cloud/ansible/openstack/roles/create_net/tasks/main.yaml

@@ -1,33 +0,0 @@
-- name: Create security group
-  openstack.cloud.security_group:
-    cloud: "{{ cloud }}"
-    name: sg-tpot-ansible
-    description: Security Group for T-Pot
-
-- name: Add rules to security group
-  openstack.cloud.security_group_rule:
-    cloud: "{{ cloud }}"
-    security_group: sg-tpot-ansible
-    remote_ip_prefix: 0.0.0.0/0
-
-- name: Create network
-  openstack.cloud.network:
-    cloud: "{{ cloud }}"
-    name: network-tpot-ansible
-
-- name: Create subnet
-  openstack.cloud.subnet:
-    cloud: "{{ cloud }}"
-    network_name: network-tpot-ansible
-    name: subnet-tpot-ansible
-    cidr: 192.168.0.0/24
-    dns_nameservers:
-      - 100.125.4.25
-      - 100.125.129.199
-
-- name: Create router
-  openstack.cloud.router:
-    cloud: "{{ cloud }}"
-    name: router-tpot-ansible
-    interfaces:
-      - subnet-tpot-ansible

cloud/ansible/openstack/roles/create_vm/tasks/main.yaml

@@ -1,24 +0,0 @@
-- name: Generate T-Pot name
-  ansible.builtin.set_fact:
-    tpot_name: "t-pot-ansible-{{ lookup('password', '/dev/null chars=ascii_lowercase,digits length=6') }}"
-
-- name: Create instance {{ ansible_loop.index }} of {{ ansible_loop.length }}
-  openstack.cloud.server:
-    cloud: "{{ cloud }}"
-    name: "{{ tpot_name }}"
-    availability_zone: "{{ availability_zone }}"
-    image: "{{ image }}"
-    boot_from_volume: yes
-    volume_size: "{{ volume_size }}"
-    key_name: "{{ key_name }}"
-    auto_ip: yes
-    flavor: "{{ flavor }}"
-    security_groups: sg-tpot-ansible
-    network: network-tpot-ansible
-  register: tpot
-
-- name: Add instance to inventory
-  ansible.builtin.add_host:
-    hostname: "{{ tpot_name }}"
-    ansible_host: "{{ tpot.server.public_v4 }}"
-    groups: tpot

cloud/ansible/openstack/roles/create_vm/vars/main.yaml

@@ -1,5 +0,0 @@
-availability_zone: eu-de-03
-image: Standard_Debian_10_latest
-volume_size: 128
-key_name: your-KeyPair
-flavor: s3.medium.8

cloud/ansible/openstack/roles/custom_ews/tasks/main.yaml

@@ -1,13 +0,0 @@
-- name: Copy ews configuration file
-  ansible.builtin.template:
-    src: ews.cfg
-    dest: /data/ews/conf
-    owner: root
-    group: root
-    mode: 0644
-
-- name: Patching tpot.yml with custom ews configuration file
-  ansible.builtin.lineinfile:
-    path: /opt/tpot/etc/tpot.yml
-    insertafter: "/opt/ewsposter/ews.ip"
-    line: "     - /data/ews/conf/ews.cfg:/opt/ewsposter/ews.cfg"

cloud/ansible/openstack/roles/custom_ews/templates/ews.cfg

@@ -1,137 +0,0 @@
-[MAIN]
-homedir = /opt/ewsposter/
-spooldir = /opt/ewsposter/spool/
-logdir = /opt/ewsposter/log/
-del_malware_after_send = false
-send_malware = true
-sendlimit = 500
-contact = your_email_address
-proxy =
-ip =
-
-[EWS]
-ews = true
-username = your_username
-token = your_token
-rhost_first = https://community.sicherheitstacho.eu/ews-0.1/alert/postSimpleMessage
-rhost_second = https://community.sicherheitstacho.eu/ews-0.1/alert/postSimpleMessage
-ignorecert = false
-
-[HPFEED]
-hpfeed = %(EWS_HPFEEDS_ENABLE)s
-host = %(EWS_HPFEEDS_HOST)s
-port = %(EWS_HPFEEDS_PORT)s
-channels = %(EWS_HPFEEDS_CHANNELS)s
-ident = %(EWS_HPFEEDS_IDENT)s
-secret= %(EWS_HPFEEDS_SECRET)s
-# path/to/certificate for tls broker - or "false" for non-tls broker
-tlscert = %(EWS_HPFEEDS_TLSCERT)s
-# hpfeeds submission format: "ews" (xml) or "json"
-hpfformat = %(EWS_HPFEEDS_FORMAT)s
-
-[EWSJSON]
-json = false
-jsondir = /data/ews/json/
-
-[GLASTOPFV3]
-glastopfv3 = true
-nodeid = glastopfv3-{{ ansible_hostname }}
-sqlitedb = /data/glastopf/db/glastopf.db
-malwaredir = /data/glastopf/data/files/
-
-[GLASTOPFV2]
-glastopfv2 = false
-nodeid =
-mysqlhost =
-mysqldb =
-mysqluser =
-mysqlpw =
-malwaredir =
-
-[KIPPO]
-kippo = false
-nodeid =
-mysqlhost =
-mysqldb =
-mysqluser =
-mysqlpw =
-malwaredir =
-
-[COWRIE]
-cowrie = true
-nodeid = cowrie-{{ ansible_hostname }}
-logfile = /data/cowrie/log/cowrie.json
-
-[DIONAEA]
-dionaea = true
-nodeid = dionaea-{{ ansible_hostname }}
-malwaredir = /data/dionaea/binaries/
-sqlitedb = /data/dionaea/log/dionaea.sqlite
-
-[HONEYTRAP]
-honeytrap = true
-nodeid = honeytrap-{{ ansible_hostname }}
-newversion = true
-payloaddir = /data/honeytrap/attacks/
-attackerfile = /data/honeytrap/log/attacker.log
-
-[RDPDETECT]
-rdpdetect = false
-nodeid =
-iptableslog =
-targetip =
-
-[EMOBILITY]
-eMobility = false
-nodeid = emobility-{{ ansible_hostname }}
-logfile = /data/emobility/log/centralsystemEWS.log
-
-[CONPOT]
-conpot = true
-nodeid = conpot-{{ ansible_hostname }}
-logfile = /data/conpot/log/conpot*.json
-
-[ELASTICPOT]
-elasticpot = true
-nodeid = elasticpot-{{ ansible_hostname }}
-logfile = /data/elasticpot/log/elasticpot.log
-
-[SURICATA]
-suricata = true
-nodeid = suricata-{{ ansible_hostname }}
-logfile = /data/suricata/log/eve.json
-
-[MAILONEY]
-mailoney = true
-nodeid = mailoney-{{ ansible_hostname }}
-logfile = /data/mailoney/log/commands.log
-
-[RDPY]
-rdpy = true
-nodeid = rdpy-{{ ansible_hostname }}
-logfile = /data/rdpy/log/rdpy.log
-
-[VNCLOWPOT]
-vnclowpot = true
-nodeid = vnclowpot-{{ ansible_hostname }}
-logfile = /data/vnclowpot/log/vnclowpot.log
-
-[HERALDING]
-heralding = true
-nodeid = heralding-{{ ansible_hostname }}
-logfile = /data/heralding/log/auth.csv
-
-[CISCOASA]
-ciscoasa = true
-nodeid = ciscoasa-{{ ansible_hostname }}
-logfile = /data/ciscoasa/log/ciscoasa.log
-
-[TANNER]
-tanner = true
-nodeid = tanner-{{ ansible_hostname }}
-logfile = /data/tanner/log/tanner_report.json
-
-[GLUTTON]
-glutton = true
-nodeid = glutton-{{ ansible_hostname }}
-logfile = /data/glutton/log/glutton.log

cloud/ansible/openstack/roles/custom_hpfeeds/files/hpfeeds.cfg

@@ -1,8 +0,0 @@
-myENABLE=false
-myHOST=host
-myPORT=port
-myCHANNEL=channels
-myCERT=false
-myIDENT=user
-mySECRET=secret
-myFORMAT=json

cloud/ansible/openstack/roles/custom_hpfeeds/tasks/main.yaml

@@ -1,12 +0,0 @@
-- name: Copy hpfeeds configuration file
-  ansible.builtin.copy:
-    src: hpfeeds.cfg
-    dest: /data/ews/conf
-    owner: tpot
-    group: tpot
-    mode: 0770
-  register: config
-
-- name: Applying hpfeeds settings
-  ansible.builtin.command: /opt/tpot/bin/hpfeeds_optin.sh --conf=/data/ews/conf/hpfeeds.cfg
-  when: config.changed == true

cloud/ansible/openstack/roles/install/tasks/main.yaml

@@ -1,48 +0,0 @@
-- name: Waiting for SSH connection
-  ansible.builtin.wait_for_connection:
-
-- name: Gathering facts
-  ansible.builtin.setup:
-
-- name: Cloning T-Pot install directory
-  ansible.builtin.git:
-    repo: "https://github.com/telekom-security/tpotce.git"
-    dest: /root/tpot
-
-- name: Prepare to set user password
-  ansible.builtin.set_fact:
-    user_name: "{{ ansible_user }}"
-    user_salt: "s0mew1ck3dTpoT"
-  no_log: true
-
-- name: Changing password for user {{ user_name }}
-  ansible.builtin.user:
-   name: "{{ ansible_user }}"
-   password: "{{ user_password | password_hash('sha512', user_salt) }}"
-   state: present
-   shell: /bin/bash
-
-- name: Copy T-Pot configuration file
-  ansible.builtin.copy:
-    src: ../../../../../../iso/installer/tpot.conf.dist
-    dest: /root/tpot.conf
-    owner: root
-    group: root
-    mode: 0644
-
-- name: Install T-Pot on instance -  be patient, this might take 15 to 30 minutes depending on the connection speed.
-  ansible.builtin.command: /root/tpot/iso/installer/install.sh --type=auto --conf=/root/tpot.conf
-
-- name: Delete T-Pot configuration file
-  ansible.builtin.file:
-    path: /root/tpot.conf
-    state: absent
-
-- name: Change unattended-upgrades to take default action
-  ansible.builtin.blockinfile:
-    dest: /etc/apt/apt.conf.d/50unattended-upgrades
-    block: |
-      Dpkg::Options {
-        "--force-confdef";
-        "--force-confold";
-      }

cloud/ansible/openstack/roles/install/vars/main.yaml

@@ -1 +0,0 @@
-user_password: LiNuXuSeRPaSs#

cloud/ansible/openstack/roles/reboot/tasks/main.yaml

@@ -1,16 +0,0 @@
-- name: Finally rebooting T-Pot
-  ansible.builtin.command: shutdown -r now
-  async: 1
-  poll: 0
-
-- name: Next login options
-  ansible.builtin.debug:
-    msg:
-    - "*****    SSH Access:"
-    - "*****    ssh {{ ansible_user }}@{{ ansible_host }} -p 64295"
-    - ""
-    - "*****    Web UI:"
-    - "*****    https://{{ ansible_host }}:64297"
-    - ""
-    - "*****    Admin UI:"
-    - "*****    https://{{ ansible_host }}:64294"

cloud/azure/README.md

@@ -1,71 +0,0 @@
-
-# Azure T-Pot
-
-The following deployment template will deploy a Standard T-Pot server on a Azure VM on a Network\Subnet of your choosing. [Click here to learn more on T-Pot](https://github.com/telekom-security/tpotce)
-
-[![Deploy To Azure](https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/1-CONTRIBUTION-GUIDE/images/deploytoazure.svg?sanitize=true)](https://portal.azure.com/#create/Microsoft.Template/uri/https%3A%2F%2Fraw.githubusercontent.com%2Ftelekom-security%2Ftpotce%2Fmaster%2Fcloud%2Fazure%2Fazuredeploy.json)
-[![Deploy To Azure US Gov](https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/1-CONTRIBUTION-GUIDE/images/deploytoazuregov.svg?sanitize=true)](https://portal.azure.us/#create/Microsoft.Template/uri/https%3A%2F%2Fraw.githubusercontent.com%2Ftelekom-security%2Ftpotce%2Fmaster%2Fcloud%2Fazure%2Fazuredeploy.json)
-[![Visualize](https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/1-CONTRIBUTION-GUIDE/images/visualizebutton.svg?sanitize=true)](http://armviz.io/#/?load=https%3A%2F%2Fraw.githubusercontent.com%2Ftelekom-security%2Ftpotce%2Fmaster%2Fcloud%2Fazure%2Fazuredeploy.json)
-
-## Install Instructions
-
- 1. Update the VM Name to reflect your naming convention and taxonomy.  
- 2. Place you Azure Virtual Network Resource Id *(Recommendation of
-    placement depending on goal, you may want to place    in Hub Virtual
-    Network to detect activity from on-premise or other    virtual
-    network spokes. You can also place in DMZ or isolated in a    unique
-    virtual network exposed to direct internet.)*
-  3. My Connection IP of a public ip address you are coming from to use dashboards and manage.
-  4. Cloud Init B64 Encoded write your cloud init yaml contents and base 64 encode them into this string parameter.
-
-Cloud-Init Yaml Example before B64 Encoding:
-
-    packages:
-      - git
-    
-    runcmd:
-      - curl -sS --retry 5 https://github.com
-      - git clone https://github.com/telekom-security/tpotce /root/tpot
-      - /root/tpot/iso/installer/install.sh --type=auto --conf=/root/tpot.conf
-      - rm /root/tpot.conf
-      - /sbin/shutdown -r now
-    
-    password: w3b$ecrets2!
-    chpasswd:
-      expire: false
-    
-    write_files:
-      - content: |
-          # tpot configuration file
-          myCONF_TPOT_FLAVOR='STANDARD'
-          myCONF_WEB_USER='webuser'
-          myCONF_WEB_PW='w3b$ecrets2!'
-        owner: root:root
-        path: /root/tpot.conf
-        permissions: '0600'
-
-Be sure to copy and update values like: 
-
- - password: 
- - myCONF_TPOT_FLAVOR= (Different flavors as follows: [STANDARD,
-   HIVE, HIVE_SENSOR, INDUSTRIAL, LOG4J, MEDICAL, MINI, SENSOR]
-   **Recommend deploying STANDARD** if you are exploring first time)
- - myCONF_WEB_USER=
- - myCONF_WEB_PW=
-
-Once you update the cloud init yaml file locally then base 64 encode and paste this string to in the securestring parameter.
-
-B64 Example: 
-
-    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
-
-Click review and create, deployment of VM should take less than 5 minutes, however Cloud-Init will take some time, **typically 15 minutes** before T-Pot services are up and running.
-
-## Post Install Instructions
-Install **may take around 15 minutes** for services to come up. Check to make sure from your public IP you can connect to https://azurepuplicip:64297 you will be prompted for your username and password supplied in the B64 Cloud Init String you supplied for *myCONF_WEB_PW=* 
-
-Review the [available honeypots architecture section](https://raw.githubusercontent.com/telekom-security/tpotce/master/doc/architecture.png) and [available ports](https://github.com/telekom-security/tpotce#required-ports) and poke a hole in the Network Security Group to expose the T-Pot to your on-premise network CIDR, or other Azure virtual network CIDRs, finally you can also expose a port to the public Internet for Threat Intelligence gathering.
-
-## Network Security Group
-Please study the rules carefully. You may need to make some additional rules or modifications based on your needs and considerations. As an example if this is for internal private ip range detections you may want to remove rules and place a higher priority DENY rule preventing all the T-Pot ports and services being exposed internally, and then place a few ALLOW rules to your on-premise private ip address CIDR, other Hub Private IPs, and some Spoke Private IPs.
-![enter image description here](https://raw.githubusercontent.com/telekom-security/tpotce/master/cloud/azure/images/nsg.png)

cloud/azure/azuredeploy.json

@@ -1,308 +0,0 @@
-{
-    "$schema": "http://schema.management.azure.com/schemas/2015-01-01/deploymentTemplate.json#",
-    "contentVersion": "1.0.0.0",
-    "parameters": {
-        "VMName": {
-            "type": "string",
-            "metadata": {
-                "description": "VM Name and convention your company uses, be sure to entice naming EX. vm-fileshares-prod-eastus-003"
-            },
-            "defaultValue": "vm-fileshares-prod-eastus-003"
-        },
-        "virtualNetworkId": {
-            "type": "string",
-            "metadata": {
-                "description": "Virtual Network Resource ID to Deploy Azure VM into"
-            },
-            "defaultValue": "/subscriptions/{SUBID}/resourceGroups/{RG NAME}/providers/Microsoft.Network/virtualNetworks/{VNET NAME}"
-        },
-        "subnetName": {
-            "type": "string",
-            "metadata": {
-                "description": "Virtual Network Subnet Name to Deploy Azure VM into"
-            }
-        },
-        "MyConnectionIP": {
-            "type": "string",
-            "minLength": 7,
-            "maxLength": 15,
-            "metadata": {
-                "description": "The Public IP I will be connecting from to administer and configure"
-            },
-            "defaultValue": "XXX.XXX.XXX.XXX"
-        },
-        "adminUsername": {
-            "type": "string",
-            "minLength": 1,
-            "defaultValue": "webuser",
-            "metadata": {
-                "description": "Admin user name for Linux VM"
-            }
-        },
-        "authenticationType": {
-            "type": "string",
-            "defaultValue": "password",
-            "allowedValues": [
-                "sshPublicKey",
-                "password"
-            ],
-            "metadata": {
-                "description": "Type of authentication to use on the Virtual Machine. SSH key is recommended."
-            }
-        },
-        "adminPasswordOrKey": {
-            "type": "securestring",
-            "metadata": {
-                "description": "SSH Key or password for the Virtual Machine. SSH key is recommended."
-            }
-        },
-        "CloudInitB64Encoded": {
-            "type": "securestring",
-            "metadata": {
-                "description": "Cloud Init Configuration as a Base 64 encoded string, decode to examine a few variables to change and encode and submit"
-            },
-            "defaultValue": "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"
-        }
-    },
-    "variables": {
-        "vnetId": "[parameters('virtualNetworkId')]",
-        "subnetRef": "[concat(variables('vnetId'), '/subnets/', parameters('subnetName'))]",
-        "linuxConfiguration": {
-            "disablePasswordAuthentication": true,
-                "ssh": {
-                    "publicKeys": [
-                        {
-                            "path": "[format('/home/{0}/.ssh/authorized_keys', parameters('adminUsername'))]",
-                            "keyData": "[parameters('adminPasswordOrKey')]"
-                        }
-        ]
-      }
-    }
-    },
-    "resources": [
-        {
-            "name": "[concat(uniqueString(resourceGroup().id, deployment().name),'-nic')]",
-            "type": "Microsoft.Network/networkInterfaces",
-            "apiVersion": "2021-08-01",
-            "location": "[resourceGroup().location]",
-            "dependsOn": [
-                "[resourceId('Microsoft.Network/networkSecurityGroups/', concat(uniqueString(resourceGroup().id, deployment().name),'-nsg'))]",
-                "[resourceId('Microsoft.Network/publicIpAddresses', concat(uniqueString(resourceGroup().id, deployment().name),'-pip'))]"
-            ],
-            "properties": {
-                "ipConfigurations": [
-                    {
-                        "name": "ipconfig1",
-                        "properties": {
-                            "subnet": {
-                                "id": "[variables('subnetRef')]"
-                            },
-                            "privateIPAllocationMethod": "Dynamic",
-                            "publicIpAddress": {
-                                "id": "[resourceId(resourceGroup().name, 'Microsoft.Network/publicIpAddresses', concat(uniqueString(resourceGroup().id, deployment().name),'-pip'))]",
-                                "properties": {
-                                    "deleteOption": "Detach"
-                                }
-                            }
-                        }
-                    }
-                ],
-                "enableAcceleratedNetworking": true,
-                "networkSecurityGroup": {
-                    "id": "[resourceId('Microsoft.Network/networkSecurityGroups/', concat(uniqueString(resourceGroup().id, deployment().name),'-nsg'))]"
-                }
-            }
-        },
-        {
-            "name": "[concat(uniqueString(resourceGroup().id, deployment().name),'-nsg')]",
-            "type": "Microsoft.Network/networkSecurityGroups",
-            "apiVersion": "2019-02-01",
-            "location": "[resourceGroup().location]",
-            "properties": {
-            "securityRules": [
-            {
-                "name": "AllowAzureCloud22Inbound",
-                "properties": {
-                    "protocol": "*",
-                    "sourcePortRange": "*",
-                    "destinationPortRange": "22",
-                    "sourceAddressPrefix": "AzureCloud",
-                    "destinationAddressPrefix": "*",
-                    "access": "Allow",
-                    "priority": 1011,
-                    "direction": "Inbound",
-                    "sourcePortRanges": [],
-                    "destinationPortRanges": [],
-                    "sourceAddressPrefixes": [],
-                    "destinationAddressPrefixes": []
-                }
-            },
-            {
-                "name": "AllowCustom64294Inbound",
-                "properties": {
-                    "protocol": "*",
-                    "sourcePortRange": "*",
-                    "destinationPortRange": "64294",
-                    "sourceAddressPrefix": "[parameters('MyConnectionIP')]",
-                    "destinationAddressPrefix": "*",
-                    "access": "Allow",
-                    "priority": 1021,
-                    "direction": "Inbound",
-                    "sourcePortRanges": [],
-                    "destinationPortRanges": [],
-                    "sourceAddressPrefixes": [],
-                    "destinationAddressPrefixes": []
-                }
-            },
-            {
-                "name": "AllowSSHCustom64295Inbound",
-                "properties": {
-                    "protocol": "*",
-                    "sourcePortRange": "*",
-                    "destinationPortRange": "64295",
-                    "sourceAddressPrefix": "[parameters('MyConnectionIP')]",
-                    "destinationAddressPrefix": "*",
-                    "access": "Allow",
-                    "priority": 1031,
-                    "direction": "Inbound",
-                    "sourcePortRanges": [],
-                    "destinationPortRanges": [],
-                    "sourceAddressPrefixes": [],
-                    "destinationAddressPrefixes": []
-                }
-            },
-            {
-                "name": "AllowAzureCloud64295Inbound",
-                "properties": {
-                    "protocol": "*",
-                    "sourcePortRange": "*",
-                    "destinationPortRange": "64295",
-                    "sourceAddressPrefix": "AzureCloud",
-                    "destinationAddressPrefix": "*",
-                    "access": "Allow",
-                    "priority": 1041,
-                    "direction": "Inbound",
-                    "sourcePortRanges": [],
-                    "destinationPortRanges": [],
-                    "sourceAddressPrefixes": [],
-                    "destinationAddressPrefixes": []
-                }
-            },
-            {
-                "name": "AllowCustom64297Inbound",
-                "properties": {
-                    "protocol": "*",
-                    "sourcePortRange": "*",
-                    "destinationPortRange": "64297",
-                    "sourceAddressPrefix": "[parameters('MyConnectionIP')]",
-                    "destinationAddressPrefix": "*",
-                    "access": "Allow",
-                    "priority": 1051,
-                    "direction": "Inbound",
-                    "sourcePortRanges": [],
-                    "destinationPortRanges": [],
-                    "sourceAddressPrefixes": [],
-                    "destinationAddressPrefixes": []
-                }
-            },
-            {
-                "name": "AllowAllHomeOfficeCustomAnyInbound",
-                "properties": {
-                    "protocol": "*",
-                    "sourcePortRange": "*",
-                    "destinationPortRange": "*",
-                    "sourceAddressPrefix": "[parameters('MyConnectionIP')]",
-                    "destinationAddressPrefix": "*",
-                    "access": "Allow",
-                    "priority": 1061,
-                    "direction": "Inbound",
-                    "sourcePortRanges": [],
-                    "destinationPortRanges": [],
-                    "sourceAddressPrefixes": [],
-                    "destinationAddressPrefixes": []
-                }
-            }
-        ]
-            }
-        },
-        {
-            "name": "[concat(uniqueString(resourceGroup().id, deployment().name),'-pip')]",
-            "type": "Microsoft.Network/publicIpAddresses",
-            "apiVersion": "2020-08-01",
-            "location": "[resourceGroup().location]",
-            "properties": {
-                "publicIpAllocationMethod": "Static"
-            },
-            "sku": {
-                "name": "Standard"
-            },
-            "zones": [
-                "1"
-            ]
-        },
-        {
-            "name": "[parameters('VMName')]",
-            "type": "Microsoft.Compute/virtualMachines",
-            "apiVersion": "2022-03-01",
-            "location": "[resourceGroup().location]",
-            "dependsOn": [
-                "[resourceId('Microsoft.Network/networkInterfaces', concat(uniqueString(resourceGroup().id, deployment().name),'-nic'))]"
-            ],
-            "properties": {
-                "hardwareProfile": {
-                    "vmSize": "Standard_D4s_v3"
-                },
-                "storageProfile": {
-                    "osDisk": {
-                        "createOption": "fromImage",
-                        "managedDisk": {
-                            "storageAccountType": "StandardSSD_LRS"
-                        },
-                        "deleteOption": "Delete"
-                    },
-                    "imageReference": {
-                        "publisher": "debian",
-                        "offer": "debian-11",
-                        "sku": "11-gen2",
-                        "version": "latest"
-                    },
-                    "dataDisks": [
-                        {
-                            "name": "[concat(parameters('VMName'),'-datadisk')]",
-                            "diskSizeGB": 256,
-                            "lun": 0,
-                            "createOption": "Empty",
-                            "caching": "ReadWrite"
-                        }
-                    ]
-                },
-                "networkProfile": {
-                    "networkInterfaces": [
-                        {
-                            "id": "[resourceId('Microsoft.Network/networkInterfaces', concat(uniqueString(resourceGroup().id, deployment().name),'-nic'))]",
-                            "properties": {
-                                "deleteOption": "Delete"
-                            }
-                        }
-                    ]
-                },
-                "osProfile": {
-                    "computerName": "[parameters('VMName')]",
-                    "adminUsername": "[parameters('adminUsername')]",
-                    "adminPassword": "[parameters('adminPasswordOrKey')]",
-                    "linuxConfiguration": "[if(equals(parameters('authenticationType'), 'password'), null(), variables('linuxConfiguration'))]",
-                    "customData": "[parameters('CloudInitB64Encoded')]"
-                },
-                "diagnosticsProfile": {
-                    "bootDiagnostics": {
-                        "enabled": true
-                    }
-                }
-            },
-            "zones": [
-                "1"
-            ]
-        }
-    ],
-    "outputs": {}
-}

cloud/terraform/README.md

@@ -1,129 +0,0 @@
-# T-Pot Terraform
-This [Terraform](https://www.terraform.io/) configuration can be used to launch a virtual machine, bootstrap any dependencies and install T-Pot in a single step.  
-Configuration for Amazon Web Services (AWS) and Open Telekom Cloud (OTC) is currently included.
-This can easily be extended to support other [Terraform providers](https://registry.terraform.io/browse/providers?category=public-cloud%2Ccloud-automation%2Cinfrastructure).
-
-[Cloud-init](https://cloudinit.readthedocs.io/en/latest/) is used to bootstrap the instance and install T-Pot on startup.
-
-# Table of Contents
-- [What get's created](#what-created)
-  - [Amazon Web Services (AWS)](#what-created-aws)
-  - [Open Telekom Cloud (OTC)](#what-created-otc)
-- [Prerequisites](#pre)
-  - [Amazon Web Services (AWS)](#pre-aws)
-  - [Open Telekom Cloud (OTC)](#pre-otc)
-- [Terraform Variables](#variables)
-  - [Common configuration items](#variables-common)
-  - [Amazon Web Services (AWS)](#variables-aws)
-  - [Open Telekom Cloud (OTC)](#variables-otc)
-- [Initialising](#initialising)
-- [Applying the Configuration](#applying)
-- [Connecting to the Instance](#connecting)
-
-<a name="what-created"></a>
-## What get's created
-
-<a name="what-created-aws"></a>
-### Amazon Web Services (AWS)
-* EC2 instance:
-  * t3.large (2 vCPUs, 8 GB RAM)
-  * 128 GB disk
-  * Debian 10
-  * Public IP
-* Security Group:
-  * TCP/UDP ports <= 64000 open to the Internet
-  * TCP ports 64294, 64295 and 64297 open to a chosen administrative IP
-
-<a name="what-created-otc"></a>
-### Open Telekom Cloud (OTC)
-* ECS instance:
-  * s3.medium.8 (1 vCPU, 8 GB RAM)
-  * 128 GB disk
-  * Debian 10
-  * Public EIP
-* Security Group
-  * All TCP/UDP ports are open to the Internet
-* Virtual Private Cloud (VPC) and Subnet
-
-<a name="pre"></a>
-## Prerequisites
-* [Terraform](https://www.terraform.io/) 0.13
-
-<a name="pre-aws"></a>
-### Amazon Web Services (AWS)
-* AWS Account
-  * Existing VPC: VPC ID needs to be specified in `aws/variables.tf`
-  * Existing subnet: Subnet ID needs to be specified in `aws/variables.tf`
-  * Existing SSH key pair: Key name needs to be specified in `aws/variables.tf`
-* AWS Authentication credentials should be [set using environment variables](https://www.terraform.io/docs/providers/aws/index.html#environment-variables)
-
-<a name="pre-otc"></a>
-### Open Telekom Cloud (OTC)
-* OTC Account
-  * Existing SSH key pair: Key name needs to be specified in `otc/variables.tf`
-* OTC Authentication credentials (Username, Password, Project Name, User Domain Name) can be set in the `otc/clouds.yaml` file
-
-<a name="variables"></a>
-## Terraform Variables
-
-<a name="variables-common"></a>
-### Common configuration items
-These variables exist in `aws/variables.tf` and `otc/variables.tf` respectively.  
-Settings for cloud-init:  
-* `timezone` - Set the Server's timezone
-* `linux_password`- Set a password for the Linux Operating System user (which is also used on the Admin UI)
-
-Settings for T-Pot:  
-* `tpot_flavor` - Set the flavor of the T-Pot (Available flavors are listed in the variable's description)
-* `web_user` - Set a username for the T-Pot Kibana Dasboard
-* `web_password` - Set a password for the T-Pot Kibana Dashboard
-
-<a name="variables-aws"></a>
-### Amazon Web Services (AWS)
-In `aws/variables.tf`, you can change the additional variables:
-* `admin_ip` - source IP address(es) that you will use to administer the system. Connections to TCP ports 64294, 64295 and 64297 will be allowed from this IP only. Multiple IPs or CIDR blocks can be specified in the format: `["127.0.0.1/32", "192.168.0.0/24"]`
-* `ec2_vpc_id` - Specify an existing VPC ID
-* `ec2_subnet_id` - Specify an existing Subnet ID
-* `ec2_region`
-* `ec2_ssh_key_name` - Specify an existing SSH key pair
-* `ec2_instance_type`
-
-<a name="variables-otc"></a>
-### Open Telekom Cloud (OTC)
-In `otc/variables.tf`, you can change the additional variables:
-* `ecs_flavor`
-* `ecs_disk_size`
-* `availability_zone`
-* `key_pair` - Specify an existing SSH key pair
-* `eip_size`
-
-... and some more, but these are the most relevant.
-
-<a name="initialising"></a>
-## Initialising
-The [`terraform init`](https://www.terraform.io/docs/commands/init.html) command is used to initialize a working directory containing Terraform configuration files.
-
-```
-$ cd aws
-$ terraform init
-```
-OR
-```
-$ cd otc
-$ terraform init
-```
-
-<a name="applying"></a>
-## Applying the Configuration
-The [`terraform apply`](https://www.terraform.io/docs/commands/apply.html) command is used to apply the changes required to reach the desired state of the configuration, or the pre-determined set of actions generated by a [`terraform plan`](https://www.terraform.io/docs/commands/plan.html) execution plan.
-
-```
-$ terraform apply
-```
-This will create your infrastructure and start a Cloud Server. On startup, the Server gets bootstrapped with cloud-init and will install T-Pot. Once this is done, the server will reboot.
-
-If you want the remove the built infrastructure, you can run [`terraform destroy`](https://www.terraform.io/docs/commands/destroy.html) to delete it.
-
-<a name="connecting"></a>
-## Connecting to the Instance
-When the installation is completed, you can proceed with connecting/logging in to the T-Pot according to the [documentation](https://github.com/telekom-security/tpotce#ssh-and-web-access).

cloud/terraform/aws/.terraform.lock.hcl

@@ -1,20 +0,0 @@
-# This file is maintained automatically by "terraform init".
-# Manual edits may be lost in future updates.
-
-provider "registry.terraform.io/hashicorp/aws" {
-  version     = "3.26.0"
-  constraints = "3.26.0"
-  hashes = [
-    "h1:0i78FItlPeiomd+4ThZrtm56P5K33k7/6dnEe4ZePI0=",
-    "zh:26043eed36d070ca032cf04bc980c654a25821a8abc0c85e1e570e3935bbfcbb",
-    "zh:2fe68f3f78d23830a04d7fac3eda550eef1f627dfc130486f70a65dc5c254300",
-    "zh:3d66484c608c64678e639db25d63872783ce60363a1246e30317f21c9c23b84b",
-    "zh:46ffd755cfd4cf94fe66342797b5afdcef010a24e126c67fee141b357d393535",
-    "zh:5e96f24357e945c9067cf5e032ad1d003609629c956c2f9f642fefe714e74587",
-    "zh:60c27aca36bb63bf3e865c2193be80ca83b376581d00f9c220af4b013e163c4d",
-    "zh:896f0f22d19d41e71b22f9240b261714c3915b165ddefeb771e7734d69dc47ea",
-    "zh:90de9966cb2fd3e2f326df291595e55d2dd2d90e7d6dd085c2c8691dce82bdb4",
-    "zh:ad05a91a88ceb1d6de5a568f7cc0b0e5bc0a79f3da70bc28c1e7f3750e362d58",
-    "zh:e8c63f59c6465329e1f3357498face3dd7ef10a033df3c366a33aa9e94b46c01",
-  ]
-}

cloud/terraform/aws/main.tf

@@ -1,66 +0,0 @@
-provider "aws" {
-  region = var.ec2_region
-}
-
-resource "aws_security_group" "tpot" {
-  name        = "T-Pot"
-  description = "T-Pot Honeypot"
-  vpc_id      = var.ec2_vpc_id
-  ingress {
-    from_port   = 0
-    to_port     = 64000
-    protocol    = "tcp"
-    cidr_blocks = ["0.0.0.0/0"]
-  }
-  ingress {
-    from_port   = 0
-    to_port     = 64000
-    protocol    = "udp"
-    cidr_blocks = ["0.0.0.0/0"]
-  }
-  ingress {
-    from_port   = 64294
-    to_port     = 64294
-    protocol    = "tcp"
-    cidr_blocks = var.admin_ip
-  }
-  ingress {
-    from_port   = 64295
-    to_port     = 64295
-    protocol    = "tcp"
-    cidr_blocks = var.admin_ip
-  }
-  ingress {
-    from_port   = 64297
-    to_port     = 64297
-    protocol    = "tcp"
-    cidr_blocks = var.admin_ip
-  }
-  egress {
-    from_port   = 0
-    to_port     = 0
-    protocol    = "-1"
-    cidr_blocks = ["0.0.0.0/0"]
-  }
-  tags = {
-    Name = "T-Pot"
-  }
-}
-
-resource "aws_instance" "tpot" {
-  ami           = var.ec2_ami[var.ec2_region]
-  instance_type = var.ec2_instance_type
-  key_name      = var.ec2_ssh_key_name
-  subnet_id     = var.ec2_subnet_id
-  tags = {
-    Name = "T-Pot Honeypot"
-  }
-  root_block_device {
-    volume_type           = "gp2"
-    volume_size           = 128
-    delete_on_termination = true
-  }
-  user_data                   = templatefile("../cloud-init.yaml", { timezone = var.timezone, password = var.linux_password, tpot_flavor = var.tpot_flavor, web_user = var.web_user, web_password = var.web_password })
-  vpc_security_group_ids      = [aws_security_group.tpot.id]
-  associate_public_ip_address = true
-}

cloud/terraform/aws/outputs.tf

@@ -1,12 +0,0 @@
-output "Admin_UI" {
-  value = "https://${aws_instance.tpot.public_dns}:64294/"
-}
-
-output "SSH_Access" {
-  value = "ssh -i {private_key_file} -p 64295 admin@${aws_instance.tpot.public_dns}"
-}
-
-output "Web_UI" {
-  value = "https://${aws_instance.tpot.public_dns}:64297/"
-}
-

cloud/terraform/aws/variables.tf

@@ -1,93 +0,0 @@
-variable "admin_ip" {
-  default     = ["127.0.0.1/32"]
-  description = "admin IP addresses in CIDR format"
-}
-
-variable "ec2_vpc_id" {
-  description = "ID of AWS VPC"
-  default     = "vpc-XXX"
-}
-
-variable "ec2_subnet_id" {
-  description = "ID of AWS VPC subnet"
-  default     = "subnet-YYY"
-}
-
-variable "ec2_region" {
-  description = "AWS region to launch servers"
-  default     = "eu-west-1"
-}
-
-variable "ec2_ssh_key_name" {
-  default = "default"
-}
-
-# https://aws.amazon.com/ec2/instance-types/
-# t3.large = 2 vCPU, 8 GiB RAM
-variable "ec2_instance_type" {
-  default = "t3.large"
-}
-
-# Refer to https://wiki.debian.org/Cloud/AmazonEC2Image/Bullseye
-variable "ec2_ami" {
-  type = map(string)
-  default = {
-    "af-south-1"     = "ami-0c372f041acae6d49"
-    "ap-east-1"      = "ami-079b8d011d4655385"
-    "ap-northeast-1" = "ami-08dbbf1c0485a4aa8"
-    "ap-northeast-2" = "ami-0269fe7d013b8e2dd"
-    "ap-northeast-3" = "ami-0848d1e5fb6e3e3da"
-    "ap-south-1"     = "ami-020d429f17c9f1d0a"
-    "ap-southeast-1" = "ami-09625a221230d9fe6"
-    "ap-southeast-2" = "ami-03cbc6cddb06af2c2"
-    "ca-central-1"   = "ami-09125623b02302014"
-    "eu-central-1"   = "ami-00c36c60f07e21791"
-    "eu-north-1"     = "ami-052bea934e2d9dbfe"
-    "eu-south-1"     = "ami-04e2bb16d37324719"
-    "eu-west-1"      = "ami-0f87948fe2cf1b2a4"
-    "eu-west-2"      = "ami-02ed1bc837487d535"
-    "eu-west-3"      = "ami-080efd2add7e29430"
-    "me-south-1"     = "ami-0dbde382c834c4a72"
-    "sa-east-1"      = "ami-0a0792814cb068077"
-    "us-east-1"      = "ami-05dd1b6e7ef6f8378"
-    "us-east-2"      = "ami-04dd0542609808c50"
-    "us-west-1"      = "ami-07af5f877b3db9f73"
-    "us-west-2"      = "ami-0d0d8694ba492c02b"
-  }
-}
-
-## cloud-init configuration ##
-variable "timezone" {
-  default = "UTC"
-}
-
-variable "linux_password" {
-  #default = "LiNuXuSeRPaSs#"
-  description = "Set a password for the default user"
-
-  validation {
-    condition     = length(var.linux_password) > 0
-    error_message = "Please specify a password for the default user."
-  }
-}
-
-## These will go in the generated tpot.conf file ##
-variable "tpot_flavor" {
-  default     = "STANDARD"
-  description = "Specify your tpot flavor [STANDARD, HIVE, HIVE_SENSOR, INDUSTRIAL, LOG4J, MEDICAL, MINI, SENSOR]"
-}
-
-variable "web_user" {
-  default     = "webuser"
-  description = "Set a username for the web user"
-}
-
-variable "web_password" {
-  #default = "w3b$ecret"
-  description = "Set a password for the web user"
-
-  validation {
-    condition     = length(var.web_password) > 0
-    error_message = "Please specify a password for the web user."
-  }
-}

cloud/terraform/aws/versions.tf

@@ -1,9 +0,0 @@
-terraform {
-  required_version = ">= 0.13"
-  required_providers {
-    aws = {
-      source  = "hashicorp/aws"
-      version = "3.26.0"
-    }
-  }
-}

cloud/terraform/aws_multi_region/_provider.tf

@@ -1,9 +0,0 @@
-provider "aws" {
-  alias  = "eu-west-2"
-  region = "eu-west-2"
-}
-
-provider "aws" {
-  alias  = "us-west-1"
-  region = "us-west-1"
-}

cloud/terraform/aws_multi_region/main.tf

@@ -1,27 +0,0 @@
-module "eu-west-2" {
-  source = "./modules/multi-region"
-  ec2_vpc_id = "vpc-xxxxxxxx"
-  ec2_subnet_id = "subnet-xxxxxxxx"
-  ec2_region = "eu-west-2"
-  tpot_name = "T-Pot Honeypot"
-  
-  linux_password = var.linux_password
-  web_password = var.web_password
-  providers = {
-    aws = aws.eu-west-2
-  }
-}
-
-module "us-west-1" {
-  source = "./modules/multi-region"
-  ec2_vpc_id = "vpc-xxxxxxxx"
-  ec2_subnet_id = "subnet-xxxxxxxx"
-  ec2_region = "us-west-1"
-  tpot_name = "T-Pot Honeypot"
-
-  linux_password = var.linux_password
-  web_password = var.web_password
-  providers = {
-    aws = aws.us-west-1
-  }
-}

cloud/terraform/aws_multi_region/modules/multi-region/main.tf

@@ -1,69 +0,0 @@
-variable "ec2_vpc_id" {}
-variable "ec2_subnet_id" {}
-variable "ec2_region" {}
-variable "linux_password" {}
-variable "web_password" {}
-variable "tpot_name" {}
-
-resource "aws_security_group" "tpot" {
-  name        = "T-Pot"
-  description = "T-Pot Honeypot"
-  vpc_id      = var.ec2_vpc_id
-  ingress {
-    from_port   = 0
-    to_port     = 64000
-    protocol    = "tcp"
-    cidr_blocks = ["0.0.0.0/0"]
-  }
-  ingress {
-    from_port   = 0
-    to_port     = 64000
-    protocol    = "udp"
-    cidr_blocks = ["0.0.0.0/0"]
-  }
-  ingress {
-    from_port   = 64294
-    to_port     = 64294
-    protocol    = "tcp"
-    cidr_blocks = var.admin_ip
-  }
-  ingress {
-    from_port   = 64295
-    to_port     = 64295
-    protocol    = "tcp"
-    cidr_blocks = var.admin_ip
-  }
-  ingress {
-    from_port   = 64297
-    to_port     = 64297
-    protocol    = "tcp"
-    cidr_blocks = var.admin_ip
-  }
-  egress {
-    from_port   = 0
-    to_port     = 0
-    protocol    = "-1"
-    cidr_blocks = ["0.0.0.0/0"]
-  }
-  tags = {
-    Name = "T-Pot"
-  }
-}
-
-resource "aws_instance" "tpot" {
-  ami           = var.ec2_ami[var.ec2_region]
-  instance_type = var.ec2_instance_type
-  key_name      = var.ec2_ssh_key_name
-  subnet_id     = var.ec2_subnet_id
-  tags = {
-    Name = var.tpot_name
-  }
-  root_block_device {
-    volume_type           = "gp2"
-    volume_size           = 128
-    delete_on_termination = true
-  }
-  user_data                   = templatefile("../cloud-init.yaml", { timezone = var.timezone, password = var.linux_password, tpot_flavor = var.tpot_flavor, web_user = var.web_user, web_password = var.web_password })
-  vpc_security_group_ids      = [aws_security_group.tpot.id]
-  associate_public_ip_address = true
-}

cloud/terraform/aws_multi_region/modules/multi-region/outputs.tf

@@ -1,12 +0,0 @@
-output "Admin_UI" {
-  value = "https://${aws_instance.tpot.public_dns}:64294/"
-}
-
-output "SSH_Access" {
-  value = "ssh -i {private_key_file} -p 64295 admin@${aws_instance.tpot.public_dns}"
-}
-
-output "Web_UI" {
-  value = "https://${aws_instance.tpot.public_dns}:64297/"
-}
-

cloud/terraform/aws_multi_region/modules/multi-region/variables.tf

@@ -1,57 +0,0 @@
-variable "admin_ip" {
-  default     = ["127.0.0.1/32"]
-  description = "admin IP addresses in CIDR format"
-}
-
-variable "ec2_ssh_key_name" {
-  default = "default"
-}
-
-# https://aws.amazon.com/ec2/instance-types/
-variable "ec2_instance_type" {
-  default = "t3.xlarge"
-}
-
-# Refer to https://wiki.debian.org/Cloud/AmazonEC2Image/Bullseye
-variable "ec2_ami" {
-  type = map(string)
-  default = {
-    "af-south-1"     = "ami-0c372f041acae6d49"
-    "ap-east-1"      = "ami-079b8d011d4655385"
-    "ap-northeast-1" = "ami-08dbbf1c0485a4aa8"
-    "ap-northeast-2" = "ami-0269fe7d013b8e2dd"
-    "ap-northeast-3" = "ami-0848d1e5fb6e3e3da"
-    "ap-south-1"     = "ami-020d429f17c9f1d0a"
-    "ap-southeast-1" = "ami-09625a221230d9fe6"
-    "ap-southeast-2" = "ami-03cbc6cddb06af2c2"
-    "ca-central-1"   = "ami-09125623b02302014"
-    "eu-central-1"   = "ami-00c36c60f07e21791"
-    "eu-north-1"     = "ami-052bea934e2d9dbfe"
-    "eu-south-1"     = "ami-04e2bb16d37324719"
-    "eu-west-1"      = "ami-0f87948fe2cf1b2a4"
-    "eu-west-2"      = "ami-02ed1bc837487d535"
-    "eu-west-3"      = "ami-080efd2add7e29430"
-    "me-south-1"     = "ami-0dbde382c834c4a72"
-    "sa-east-1"      = "ami-0a0792814cb068077"
-    "us-east-1"      = "ami-05dd1b6e7ef6f8378"
-    "us-east-2"      = "ami-04dd0542609808c50"
-    "us-west-1"      = "ami-07af5f877b3db9f73"
-    "us-west-2"      = "ami-0d0d8694ba492c02b"
-  }
-}
-
-## cloud-init configuration ##
-variable "timezone" {
-  default = "UTC"
-}
-
-## These will go in the generated tpot.conf file ##
-variable "tpot_flavor" {
-  default     = "STANDARD"
-  description = "Specify your tpot flavor [STANDARD, HIVE, HIVE_SENSOR, INDUSTRIAL, LOG4J, MEDICAL, MINI, SENSOR]"
-}
-
-variable "web_user" {
-  default     = "webuser"
-  description = "Set a username for the web user"
-}

cloud/terraform/aws_multi_region/modules/multi-region/versions.tf

@@ -1,9 +0,0 @@
-terraform {
-  required_version = ">= 0.13"
-  required_providers {
-    aws = {
-      source  = "hashicorp/aws"
-      version = "3.72.0"
-    }
-  }
-}

cloud/terraform/aws_multi_region/outputs.tf

@@ -1,7 +0,0 @@
-output "eu-west-2_Web_UI" {
-  value = module.eu-west-2.Web_UI
-}
-
-output "us-west-1_Web_UI" {
-  value = module.us-west-1.Web_UI
-}

cloud/terraform/aws_multi_region/variables.tf

@@ -1,19 +0,0 @@
-variable "linux_password" {
-  #default = "LiNuXuSeRP4Ss!"
-  description = "Set a password for the default user"
-
-  validation {
-    condition     = length(var.linux_password) > 0
-    error_message = "Please specify a password for the default user."
-  }
-}
-
-variable "web_password" {
-  #default = "w3b$ecret20"
-  description = "Set a password for the web user"
-
-  validation {
-    condition     = length(var.web_password) > 0
-    error_message = "Please specify a password for the web user."
-  }
-}

cloud/terraform/cloud-init.yaml

@@ -1,26 +0,0 @@
-#cloud-config
-timezone: ${timezone}
-
-packages:
-  - git
-
-runcmd:
-  - curl -sS --retry 5 https://github.com
-  - git clone https://github.com/telekom-security/tpotce /root/tpot
-  - /root/tpot/iso/installer/install.sh --type=auto --conf=/root/tpot.conf
-  - rm /root/tpot.conf
-  - /sbin/shutdown -r now
-
-password: ${password}
-chpasswd:
-  expire: false
-
-write_files:
-  - content: |
-      # tpot configuration file
-      myCONF_TPOT_FLAVOR='${tpot_flavor}'
-      myCONF_WEB_USER='${web_user}'
-      myCONF_WEB_PW='${web_password}'
-    owner: root:root
-    path: /root/tpot.conf
-    permissions: '0600'

cloud/terraform/otc/.terraform.lock.hcl

@@ -1,38 +0,0 @@
-# This file is maintained automatically by "terraform init".
-# Manual edits may be lost in future updates.
-
-provider "registry.terraform.io/hashicorp/random" {
-  version     = "3.1.0"
-  constraints = "~> 3.1.0"
-  hashes = [
-    "h1:BZMEPucF+pbu9gsPk0G0BHx7YP04+tKdq2MrRDF1EDM=",
-    "zh:2bbb3339f0643b5daa07480ef4397bd23a79963cc364cdfbb4e86354cb7725bc",
-    "zh:3cd456047805bf639fbf2c761b1848880ea703a054f76db51852008b11008626",
-    "zh:4f251b0eda5bb5e3dc26ea4400dba200018213654b69b4a5f96abee815b4f5ff",
-    "zh:7011332745ea061e517fe1319bd6c75054a314155cb2c1199a5b01fe1889a7e2",
-    "zh:738ed82858317ccc246691c8b85995bc125ac3b4143043219bd0437adc56c992",
-    "zh:7dbe52fac7bb21227acd7529b487511c91f4107db9cc4414f50d04ffc3cab427",
-    "zh:a3a9251fb15f93e4cfc1789800fc2d7414bbc18944ad4c5c98f466e6477c42bc",
-    "zh:a543ec1a3a8c20635cf374110bd2f87c07374cf2c50617eee2c669b3ceeeaa9f",
-    "zh:d9ab41d556a48bd7059f0810cf020500635bfc696c9fc3adab5ea8915c1d886b",
-    "zh:d9e13427a7d011dbd654e591b0337e6074eef8c3b9bb11b2e39eaaf257044fd7",
-    "zh:f7605bd1437752114baf601bdf6931debe6dc6bfe3006eb7e9bb9080931dca8a",
-  ]
-}
-
-provider "registry.terraform.io/opentelekomcloud/opentelekomcloud" {
-  version     = "1.23.6"
-  constraints = "~> 1.23.4"
-  hashes = [
-    "h1:B/1Md957jWaDgFqsJDzmJc75KwL0eC/PCVuZ8HV5xSc=",
-    "zh:1aa79010869d082157fb44fc83c3bff4e40938ec0ca916f704d974c7f7ca39e4",
-    "zh:3155b8366828ce50231f69962b55df1e2261ed63c44bb64e2c950dd68769df1b",
-    "zh:4a909617aa96a6d8aead14f56996ad94e0a1cae9d28e8df1ddae19c2095ed337",
-    "zh:4f71046719632b4b90f88d29d8ba88915ee6ad66cd9d7ebe84a7459013e5003a",
-    "zh:67e4d10b2db79ad78ae2ec8d9dfac53c4721028f97f4436a7aa45e80b1beefd3",
-    "zh:7f12541fc5a3513e5522ff2bd5fee17d1e67bfe64f9ef59d03863fc7389e12ce",
-    "zh:86fadabfc8307cf6084a412ffc9c797ec94932d08bc663a3fcebf98101e951f6",
-    "zh:98744b39c2bfe3e8e6f929f750a689971071b257f3f066f669f93c8e0b76d179",
-    "zh:c363d41debb060804e2c6bd9cb50b4e8daa37362299e3ea74e187265cd85f2ca",
-  ]
-}

cloud/terraform/otc/clouds.yaml

@@ -1,9 +0,0 @@
-clouds:
-  open-telekom-cloud:
-    region_name: eu-de
-    auth:
-      project_name: eu-de_your_project
-      username: your_api_user
-      password: your_password
-      user_domain_name: OTC-EU-DE-000000000010000XXXXX
-      auth_url: https://iam.eu-de.otc.t-systems.com/v3

cloud/terraform/otc/main.tf

@@ -1,68 +0,0 @@
-data "opentelekomcloud_images_image_v2" "debian" {
-  name = "Standard_Debian_10_latest"
-}
-
-resource "opentelekomcloud_networking_secgroup_v2" "secgroup_1" {
-  name        = var.secgroup_name
-  description = var.secgroup_desc
-}
-
-resource "opentelekomcloud_networking_secgroup_rule_v2" "secgroup_rule_1" {
-  direction         = "ingress"
-  ethertype         = "IPv4"
-  remote_ip_prefix  = "0.0.0.0/0"
-  security_group_id = opentelekomcloud_networking_secgroup_v2.secgroup_1.id
-}
-
-resource "opentelekomcloud_vpc_v1" "vpc_1" {
-  name = var.vpc_name
-  cidr = var.vpc_cidr
-}
-
-resource "opentelekomcloud_vpc_subnet_v1" "subnet_1" {
-  name   = var.subnet_name
-  cidr   = var.subnet_cidr
-  vpc_id = opentelekomcloud_vpc_v1.vpc_1.id
-
-  gateway_ip = var.subnet_gateway_ip
-  dns_list   = ["100.125.4.25", "100.125.129.199"]
-}
-
-resource "random_id" "tpot" {
-  byte_length = 6
-  prefix      = var.ecs_prefix
-}
-
-resource "opentelekomcloud_ecs_instance_v1" "ecs_1" {
-  name     = random_id.tpot.b64_url
-  image_id = data.opentelekomcloud_images_image_v2.debian.id
-  flavor   = var.ecs_flavor
-  vpc_id   = opentelekomcloud_vpc_v1.vpc_1.id
-
-  nics {
-    network_id = opentelekomcloud_vpc_subnet_v1.subnet_1.id
-  }
-
-  system_disk_size  = var.ecs_disk_size
-  system_disk_type  = "SAS"
-  security_groups   = [opentelekomcloud_networking_secgroup_v2.secgroup_1.id]
-  availability_zone = var.availability_zone
-  key_name          = var.key_pair
-  user_data         = templatefile("../cloud-init.yaml", { timezone = var.timezone, password = var.linux_password, tpot_flavor = var.tpot_flavor, web_user = var.web_user, web_password = var.web_password })
-}
-
-resource "opentelekomcloud_vpc_eip_v1" "eip_1" {
-  publicip {
-    type = "5_bgp"
-  }
-  bandwidth {
-    name       = "bandwidth-${random_id.tpot.b64_url}"
-    size       = var.eip_size
-    share_type = "PER"
-  }
-}
-
-resource "opentelekomcloud_compute_floatingip_associate_v2" "fip_1" {
-  floating_ip = opentelekomcloud_vpc_eip_v1.eip_1.publicip.0.ip_address
-  instance_id = opentelekomcloud_ecs_instance_v1.ecs_1.id
-}

cloud/terraform/otc/outputs.tf

@@ -1,11 +0,0 @@
-output "Admin_UI" {
-  value = "https://${opentelekomcloud_vpc_eip_v1.eip_1.publicip.0.ip_address}:64294"
-}
-
-output "SSH_Access" {
-  value = "ssh -p 64295 linux@${opentelekomcloud_vpc_eip_v1.eip_1.publicip.0.ip_address}"
-}
-
-output "Web_UI" {
-  value = "https://${opentelekomcloud_vpc_eip_v1.eip_1.publicip.0.ip_address}:64297"
-}

cloud/terraform/otc/provider.tf

@@ -1,3 +0,0 @@
-provider "opentelekomcloud" {
-  cloud = "open-telekom-cloud"
-}

cloud/terraform/otc/variables.tf

@@ -1,98 +0,0 @@
-## cloud-init configuration ##
-variable "timezone" {
-  default = "UTC"
-}
-
-variable "linux_password" {
-  #default = "LiNuXuSeRPaSs#"
-  description = "Set a password for the default user"
-
-  validation {
-    condition     = length(var.linux_password) > 0
-    error_message = "Please specify a password for the default user."
-  }
-}
-
-## Security Group ##
-variable "secgroup_name" {
-  default = "sg-tpot"
-}
-
-variable "secgroup_desc" {
-  default = "Security Group for T-Pot"
-}
-
-## Virtual Private Cloud ##
-variable "vpc_name" {
-  default = "vpc-tpot"
-}
-
-variable "vpc_cidr" {
-  default = "192.168.0.0/16"
-}
-
-## Subnet ##
-variable "subnet_name" {
-  default = "subnet-tpot"
-}
-
-variable "subnet_cidr" {
-  default = "192.168.0.0/24"
-}
-
-variable "subnet_gateway_ip" {
-  default = "192.168.0.1"
-}
-
-## Elastic Cloud Server ##
-variable "ecs_prefix" {
-  default = "tpot-"
-}
-
-variable "ecs_flavor" {
-  default = "s3.medium.8"
-}
-
-variable "ecs_disk_size" {
-  default = "128"
-}
-
-variable "availability_zone" {
-  default = "eu-de-03"
-}
-
-variable "key_pair" {
-  #default = ""
-  description = "Specify your SSH key pair"
-
-  validation {
-    condition     = length(var.key_pair) > 0
-    error_message = "Please specify a Key Pair."
-  }
-}
-
-## Elastic IP ##
-variable "eip_size" {
-  default = "100"
-}
-
-## These will go in the generated tpot.conf file ##
-variable "tpot_flavor" {
-  default     = "STANDARD"
-  description = "Specify your tpot flavor [STANDARD, HIVE, HIVE_SENSOR, INDUSTRIAL, LOG4J, MEDICAL, MINI, SENSOR]"
-}
-
-variable "web_user" {
-  default     = "webuser"
-  description = "Set a username for the web user"
-}
-
-variable "web_password" {
-  #default = "w3b$ecret"
-  description = "Set a password for the web user"
-
-  validation {
-    condition     = length(var.web_password) > 0
-    error_message = "Please specify a password for the web user."
-  }
-}

cloud/terraform/otc/versions.tf

@@ -1,13 +0,0 @@
-terraform {
-  required_version = ">= 0.13"
-  required_providers {
-    opentelekomcloud = {
-      source  = "opentelekomcloud/opentelekomcloud"
-      version = "~> 1.23.4"
-    }
-    random = {
-      source  = "hashicorp/random"
-      version = "~> 3.1.0"
-    }
-  }
-}

compose/customizer.py

@@ -0,0 +1,182 @@
+from datetime import datetime
+import yaml
+
+version = \
+"""
+ ____  [T-Pot]         _            ____        _ _     _
+/ ___|  ___ _ ____   _(_) ___ ___  | __ ) _   _(_) | __| | ___ _ __
+\___ \ / _ \ '__\ \ / / |/ __/ _ \ |  _ \| | | | | |/ _` |/ _ \ '__|
+ ___) |  __/ |   \ V /| | (_|  __/ | |_) | |_| | | | (_| |  __/ |
+|____/ \___|_|    \_/ |_|\___\___| |____/ \__,_|_|_|\__,_|\___|_| v0.21
+    
+# This script is intended for users who want to build a customized docker-compose.yml forT-Pot.
+# T-Pot Service Builder will ask for all the docker services to be included in docker-compose.yml.
+# The configuration file will be checked for conflicting ports.
+# Port conflicts have to be resolve manually or re-running the script and excluding the conflicting services.
+# Review the resulting docker-compose-custom.yml and adjust to your needs by (un)commenting the corresponding lines in the config.
+"""
+
+header = \
+"""# T-Pot: CUSTOM EDITION
+# Generated on: {current_date}
+"""
+
+config_filename = "tpot_services.yml"
+service_filename = "docker-compose-custom.yml"
+
+
+def load_config(filename):
+    try:
+        with open(filename, 'r') as file:
+            config = yaml.safe_load(file)
+    except:
+        print_color(f"Error: {filename} not found. Exiting.", "red")
+        exit()
+    return config
+
+
+def prompt_service_include(service_name):
+    while True:
+        try:
+            response = input(f"Include {service_name}? (y/n): ").strip().lower()
+            if response in ['y', 'n']:
+                return response == 'y'
+            else:
+                print_color("Please enter 'y' for yes or 'n' for no.", "red")
+        except KeyboardInterrupt:
+            print()
+            print_color("Interrupted by user. Exiting.", "red")
+            print()
+            exit()
+
+
+def check_port_conflicts(selected_services):
+    all_ports = {}
+    conflict_ports = []
+
+    for service_name, config in selected_services.items():
+        ports = config.get('ports', [])
+        for port in ports:
+            # Split the port mapping and take only the host port part
+            parts = port.split(':')
+            host_port = parts[1] if len(parts) == 3 else (parts[0] if parts[1].isdigit() else parts[1])
+
+            # Check for port conflict and associate it with the service name
+            if host_port in all_ports:
+                conflict_ports.append((service_name, host_port))
+                if all_ports[host_port] not in [service for service, _ in conflict_ports]:
+                    conflict_ports.append((all_ports[host_port], host_port))
+            else:
+                all_ports[host_port] = service_name
+
+    if conflict_ports:
+        print_color("[WARNING] - Port conflict(s) detected:", "red")
+        for service, port in conflict_ports:
+            print_color(f"{service}: {port}", "red")
+        return True
+    return False
+
+
+
+def print_color(text, color):
+    colors = {
+        "red": "\033[91m",
+        "green": "\033[92m",
+        "blue": "\033[94m",  # Added blue
+        "magenta": "\033[95m",  # Added magenta
+        "end": "\033[0m",
+    }
+    print(f"{colors[color]}{text}{colors['end']}")
+
+def enforce_dependencies(selected_services, services):
+    # If snare or any tanner services are selected, ensure all are enabled
+    tanner_services = {'snare', 'tanner', 'tanner_redis', 'tanner_phpox', 'tanner_api'}
+    if tanner_services.intersection(selected_services):
+        print_color("[OK] - For Snare / Tanner to work all required services have been added to your configuration.", "green")
+        for service in tanner_services:
+            selected_services[service] = services[service]
+
+    # If kibana is enabled, also enable elasticsearch
+    if 'kibana' in selected_services:
+        selected_services['elasticsearch'] = services['elasticsearch']
+        print_color("[OK] - Kibana requires Elasticsearch which has been added to your configuration.", "green")
+
+    # If spiderfoot is enabled, also enable nginx
+    if 'spiderfoot' in selected_services:
+        selected_services['nginx'] = services['nginx']
+        print_color("[OK] - Spiderfoot requires Nginx which has been added to your configuration.","green")
+
+
+    # If any map services are detected, enable logstash, elasticsearch, nginx, and all map services
+    map_services = {'map_web', 'map_redis', 'map_data'}
+    if map_services.intersection(selected_services):
+        print_color("[OK] - For AttackMap to work all required services have been added to your configuration.", "green")
+        for service in map_services.union({'elasticsearch', 'nginx'}):
+            selected_services[service] = services[service]
+
+    # honeytrap and glutton cannot be active at the same time, always vote in favor of honeytrap
+    if 'honeytrap' in selected_services and 'glutton' in selected_services:
+        # Remove glutton and notify
+        del selected_services['glutton']
+        print_color("[OK] - Honeytrap and Glutton cannot be active at the same time. Glutton has been removed from your configuration.","green")
+
+
+def remove_unused_networks(selected_services, services, networks):
+    used_networks = set()
+    # Identify networks used by selected services
+    for service_name in selected_services:
+        service_config = services[service_name]
+        if 'networks' in service_config:
+            for network in service_config['networks']:
+                used_networks.add(network)
+
+    # Remove unused networks
+    for network in list(networks):
+        if network not in used_networks:
+            del networks[network]
+
+
+def main():
+    config = load_config(config_filename)
+
+    # Separate services and networks
+    services = config['services']
+    networks = config.get('networks', {})
+    selected_services = {'tpotinit': services['tpotinit'],
+                         'logstash': services['logstash']}  # Always include tpotinit and logstash
+
+    for service_name, service_config in services.items():
+        if service_name not in selected_services:  # Skip already included services
+            if prompt_service_include(service_name):
+                selected_services[service_name] = service_config
+
+    # Enforce dependencies
+    enforce_dependencies(selected_services, services)
+
+    # Remove unused networks based on selected services
+    remove_unused_networks(selected_services, services, networks)
+
+    output_config = {
+        'version': '3.9',
+        'networks': networks,
+        'services': selected_services,
+    }
+
+    current_date = datetime.now().strftime("%Y-%m-%d %H:%M:%S")
+
+    with open(service_filename, 'w') as file:
+        file.write(header.format(current_date=current_date))
+        yaml.dump(output_config, file, default_flow_style=False, sort_keys=False, indent=2)
+
+    if check_port_conflicts(selected_services):
+        print_color(f"[WARNING] - Adjust the conflicting ports in the {service_filename} or re-run the script and select services that do not occupy the same port(s).",
+            "red")
+    else:
+        print_color(f"[OK] - Custom {service_filename} has been generated without port conflicts.", "green")
+    print_color(f"Copy {service_filename} to ~/tpotce and test with: docker compose -f {service_filename} up", "blue")
+    print_color(f"If everything works, exit with CTRL-C and replace docker-compose.yml with the new config.", "blue")
+
+
+if __name__ == "__main__":
+    print_color(version, "magenta")
+    main()

compose/mac_win.yml

@@ -1,3 +1,4 @@
+# T-Pot: MAC_WIN
 version: '3.9'
 
 networks:
@@ -21,24 +22,25 @@ networks:
   redishoneypot_local:
   sentrypeer_local:
   tanner_local:
+  wordpot_local:
   nginx_local:
   ewsposter_local:
 
 services:
 
-#############################################
+########################################
 #### DEV
-##############################################
+########################################
-#### T-Pot Light Init - Never delete this!
+#### T-Pot Init - Never delete this!
-##############################################
+########################################
 
 # T-Pot Init Service
   tpotinit:
     container_name: tpotinit
-    build: docker/.
     env_file:
      - .env
     restart: always
+    stop_grace_period: 60s
     tmpfs:
      - /tmp/etc:uid=2000,gid=2000
      - /tmp/:uid=2000,gid=2000
@@ -109,7 +111,7 @@ services:
     pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - ${TPOT_DATA_PATH}/citrixhoneypot/logs:/opt/citrixhoneypot/logs
+     - ${TPOT_DATA_PATH}/citrixhoneypot/log:/opt/citrixhoneypot/logs
 
 # Conpot IEC104 service
   conpot_IEC104:
@@ -407,6 +409,7 @@ services:
      - mailoney_local
     ports:
      - "25:25"
+     - "587:25"
     image: ${TPOT_REPO}/mailoney:${TPOT_VERSION}
     pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
@@ -454,15 +457,13 @@ services:
     depends_on:
       tpotinit:
         condition: service_healthy
-# SentryPeer offers to exchange bad actor data via DHT / P2P mode by setting the ENV to true (1)
-# In some cases (i.e. internally deployed T-Pots) this might be confusing as SentryPeer will show
-# the bad actors in its logs. Therefore this option is opt-in based.
 #    environment:
-#     - SENTRYPEER_PEER_TO_PEER=0
+#     - SENTRYPEER_PEER_TO_PEER=1
     networks:
      - sentrypeer_local
     ports:
 #     - "4222:4222/udp"
+     - "5060:5060/tcp"
      - "5060:5060/udp"
 #     - "127.0.0.1:8082:8082"
     image: ${TPOT_REPO}/sentrypeer:${TPOT_VERSION}
@@ -552,6 +553,22 @@ services:
     image: ${TPOT_REPO}/snare:${TPOT_VERSION}
     pull_policy: ${TPOT_PULL_POLICY}
 
+# Wordpot service
+  wordpot:
+    container_name: wordpot
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - wordpot_local
+    ports:
+     - "8080:80"
+    image: ${TPOT_REPO}/wordpot:${TPOT_VERSION}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/wordpot/log:/opt/wordpot/logs/
+
 
 ##################
 #### NSM
@@ -600,9 +617,8 @@ services:
       tpotinit:
         condition: service_healthy
     environment:
-    # For ET Pro ruleset replace "OPEN" with your OINKCODE
+     - OINKCODE=${OINKCODE:-OPEN} # Default to OPEN if unset or NULL (value provided by T-Pot .env)
-     - OINKCODE=OPEN
+    # Loading external Rules from URL
-    # Loading externel Rules from URL
     # - FROMURL="https://username:password@yoururl.com|https://username:password@otherurl.com"
     network_mode: "host"
     cap_add:
@@ -676,6 +692,11 @@ services:
      - nginx_local
     environment:
      - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
+     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
+     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
+     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
+    ports:
+      - "127.0.0.1:64305:64305"
     mem_limit: 2g
     image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
     pull_policy: ${TPOT_PULL_POLICY}
@@ -726,6 +747,8 @@ services:
      - nginx_local
     environment:
      - MAP_COMMAND=DataServer_v2.py
+     - TPOT_ATTACKMAP_TEXT=${TPOT_ATTACKMAP_TEXT}
+     - TZ=${TPOT_ATTACKMAP_TEXT_TIMEZONE}
     stop_signal: SIGKILL
     tty: true
     image: ${TPOT_REPO}/map:${TPOT_VERSION}
@@ -761,7 +784,6 @@ services:
     container_name: nginx
     restart: always
     environment:
-      - COCKPIT=${COCKPIT}
       - TPOT_OSTYPE=${TPOT_OSTYPE}
     depends_on:
       tpotinit:
@@ -778,7 +800,6 @@ services:
      - nginx_local
     ports:
      - "64297:64297"
-     - "127.0.0.1:64304:64304"
     image: ${TPOT_REPO}/nginx:${TPOT_VERSION}
     pull_policy: ${TPOT_PULL_POLICY}
     read_only: true

compose/mini.yml

@@ -1,31 +1,49 @@
-# T-Pot (NextGen)
+# T-Pot: MINI
-# Do not erase ports sections, these are used by /opt/tpot/bin/rules.sh to setup iptables ACCEPT rules for NFQ (honeytrap / glutton)
+version: '3.9'
-version: '2.3'
 
 networks:
   adbhoney_local:
   ciscoasa_local:
-  citrixhoneypot_local:
   conpot_local_IEC104:
   conpot_local_guardian_ast:
   conpot_local_ipmi:
   conpot_local_kamstrup_382:
-  ddospot_local:
   dicompot_local:
-  dionaea_local:
+  honeypots_local:
-  elasticpot_local:
-  endlessh_local:
-  hellpot_local:
-  heralding_local:
-  ipphoney_local:
-  mailoney_local:
   medpot_local:
-  redishoneypot_local:
-  ewsposter_local:
   spiderfoot_local:
+  ewsposter_local:
 
 services:
 
+#########################################
+#### DEV
+#########################################
+#### T-Pot Init - Never delete this!
+#########################################
+
+# T-Pot Init Service
+  tpotinit:
+    container_name: tpotinit
+    env_file:
+      - .env
+    restart: always
+    stop_grace_period: 60s
+    tmpfs:
+      - /tmp/etc:uid=2000,gid=2000
+      - /tmp/:uid=2000,gid=2000
+    network_mode: "host"
+    cap_add:
+     - NET_ADMIN
+    image: ${TPOT_REPO}/tpotinit:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+      - ${TPOT_DOCKER_COMPOSE}:/tmp/tpot/docker-compose.yml:ro
+      - ${TPOT_DATA_PATH}/blackhole:/etc/blackhole
+      - ${TPOT_DATA_PATH}:/data
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+
+
 ##################
 #### Honeypots
 ##################
@@ -34,20 +52,27 @@ services:
   adbhoney:
     container_name: adbhoney
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     networks:
      - adbhoney_local
     ports:
      - "5555:5555"
-    image: "dtagdevsec/adbhoney:2204"
+    image: ${TPOT_REPO}/adbhoney:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/adbhoney/log:/opt/adbhoney/log
+     - ${TPOT_DATA_PATH}/adbhoney/log:/opt/adbhoney/log
-     - /data/adbhoney/downloads:/opt/adbhoney/dl
+     - ${TPOT_DATA_PATH}/adbhoney/downloads:/opt/adbhoney/dl
 
 # Ciscoasa service
   ciscoasa:
     container_name: ciscoasa
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     tmpfs:
      - /tmp/ciscoasa:uid=2000,gid=2000
     networks:
@@ -55,28 +80,19 @@ services:
     ports:
      - "5000:5000/udp"
      - "8443:8443"
-    image: "dtagdevsec/ciscoasa:2204"
+    image: ${TPOT_REPO}/ciscoasa:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/ciscoasa/log:/var/log/ciscoasa
+     - ${TPOT_DATA_PATH}/ciscoasa/log:/var/log/ciscoasa
-
-# CitrixHoneypot service
-  citrixhoneypot:
-    container_name: citrixhoneypot
-    restart: always
-    networks:
-     - citrixhoneypot_local
-    ports:
-     - "443:443"
-    image: "dtagdevsec/citrixhoneypot:2204"
-    read_only: true
-    volumes:
-     - /data/citrixhoneypot/logs:/opt/citrixhoneypot/logs       
 
 # Conpot IEC104 service
   conpot_IEC104:
     container_name: conpot_iec104
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     environment:
      - CONPOT_CONFIG=/etc/conpot/conpot.cfg
      - CONPOT_JSON_LOG=/var/log/conpot/conpot_IEC104.json
@@ -90,15 +106,19 @@ services:
     ports:
      - "161:161/udp"
      - "2404:2404"
-    image: "dtagdevsec/conpot:2204"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/conpot/log:/var/log/conpot
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
 
 # Conpot guardian_ast service
   conpot_guardian_ast:
     container_name: conpot_guardian_ast
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     environment:
      - CONPOT_CONFIG=/etc/conpot/conpot.cfg
      - CONPOT_JSON_LOG=/var/log/conpot/conpot_guardian_ast.json
@@ -111,15 +131,19 @@ services:
      - conpot_local_guardian_ast
     ports:
      - "10001:10001"
-    image: "dtagdevsec/conpot:2204"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/conpot/log:/var/log/conpot
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
 
 # Conpot ipmi
   conpot_ipmi:
     container_name: conpot_ipmi
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     environment:
      - CONPOT_CONFIG=/etc/conpot/conpot.cfg
      - CONPOT_JSON_LOG=/var/log/conpot/conpot_ipmi.json
@@ -132,15 +156,19 @@ services:
      - conpot_local_ipmi
     ports:
      - "623:623/udp"
-    image: "dtagdevsec/conpot:2204"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/conpot/log:/var/log/conpot
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
 
 # Conpot kamstrup_382
   conpot_kamstrup_382:
     container_name: conpot_kamstrup_382
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     environment:
      - CONPOT_CONFIG=/etc/conpot/conpot.cfg
      - CONPOT_JSON_LOG=/var/log/conpot/conpot_kamstrup_382.json
@@ -154,29 +182,11 @@ services:
     ports:
      - "1025:1025"
      - "50100:50100"
-    image: "dtagdevsec/conpot:2204"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/conpot/log:/var/log/conpot
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Ddospot service
-  ddospot:
-    container_name: ddospot
-    restart: always
-    networks:
-     - ddospot_local
-    ports:
-     - "19:19/udp"
-     - "53:53/udp"
-     - "123:123/udp"
-#     - "161:161/udp"
-     - "1900:1900/udp"
-    image: "dtagdevsec/ddospot:2204"
-    read_only: true
-    volumes:
-     - /data/ddospot/log:/opt/ddospot/ddospot/logs
-     - /data/ddospot/bl:/opt/ddospot/ddospot/bl
-     - /data/ddospot/db:/opt/ddospot/ddospot/db
 
 # Dicompot service
 # Get the Horos Client for testing: https://horosproject.org/
@@ -185,195 +195,106 @@ services:
   dicompot:
     container_name: dicompot
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     networks:
      - dicompot_local
     ports:
      - "11112:11112"
-    image: "dtagdevsec/dicompot:2204"
+    image: ${TPOT_REPO}/dicompot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/dicompot/log:/var/log/dicompot
+     - ${TPOT_DATA_PATH}/dicompot/log:/var/log/dicompot
-#     - /data/dicompot/images:/opt/dicompot/images
+#     - ${TPOT_DATA_PATH}/dicompot/images:/opt/dicompot/images
 
-# Dionaea service
+# Honeypots service
-  dionaea:
+  honeypots:
-    container_name: dionaea
+    container_name: honeypots
     stdin_open: true
     tty: true
     restart: always
-    networks:
+    depends_on:
-     - dionaea_local
+      tpotinit:
-    ports:
+        condition: service_healthy
-     - "20:20"
-     - "21:21"
-     - "42:42"
-     - "69:69/udp"
-     - "81:81"
-     - "135:135"
-     # - "443:443"
-     - "445:445"
-     - "1433:1433"
-     - "1723:1723"
-     - "1883:1883"
-     - "3306:3306"
-     # - "5060:5060"
-     # - "5060:5060/udp"
-     # - "5061:5061"
-     - "27017:27017"
-    image: "dtagdevsec/dionaea:2204"
-    read_only: true
-    volumes:
-     - /data/dionaea/roots/ftp:/opt/dionaea/var/dionaea/roots/ftp
-     - /data/dionaea/roots/tftp:/opt/dionaea/var/dionaea/roots/tftp
-     - /data/dionaea/roots/www:/opt/dionaea/var/dionaea/roots/www
-     - /data/dionaea/roots/upnp:/opt/dionaea/var/dionaea/roots/upnp
-     - /data/dionaea:/opt/dionaea/var/dionaea
-     - /data/dionaea/binaries:/opt/dionaea/var/dionaea/binaries
-     - /data/dionaea/log:/opt/dionaea/var/log
-     - /data/dionaea/rtp:/opt/dionaea/var/dionaea/rtp
-
-# ElasticPot service
-  elasticpot:
-    container_name: elasticpot
-    restart: always
-    networks:
-     - elasticpot_local
-    ports:
-     - "9200:9200"
-    image: "dtagdevsec/elasticpot:2204"
-    read_only: true
-    volumes:
-     - /data/elasticpot/log:/opt/elasticpot/log
-
-# Endlessh service
-  endlessh:
-    container_name: endlessh
-    restart: always
-    networks:
-     - endlessh_local
-    ports:
-     - "22:2222"
-    image: "dtagdevsec/endlessh:2204"
-    read_only: true
-    volumes:
-     - /data/endlessh/log:/var/log/endlessh
-
-# Glutton service
-  glutton:
-    container_name: glutton
-    restart: always
     tmpfs:
-     - /var/lib/glutton:uid=2000,gid=2000
+     - /tmp:uid=2000,gid=2000
-     - /run:uid=2000,gid=2000
+    networks:
+     - honeypots_local
+    ports:
+     - "21:21"
+     - "22:22"
+     - "23:23"
+     - "25:25"
+     - "53:53/udp"
+     - "80:80"
+     - "110:110"
+     - "123:123"
+     - "143:143"
+     - "161:161"
+     - "389:389"
+     - "443:443"
+     - "445:445"
+     - "631:631"
+     - "1080:1080"
+     - "1433:1433"
+     - "1521:1521"
+     - "3306:3306"
+     - "3389:3389"
+     - "5060:5060/tcp"
+     - "5060:5060/udp"
+     - "5432:5432"
+     - "5900:5900"
+     - "6379:6379"
+     - "6667:6667"
+     - "8080:8080"
+     - "9100:9100"
+     - "9200:9200"
+     - "11211:11211"
+    image: ${TPOT_REPO}/honeypots:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/honeypots/log:/var/log/honeypots
+
+# Honeytrap service
+  honeytrap:
+    container_name: honeytrap
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    tmpfs:
+     - /tmp/honeytrap:uid=2000,gid=2000
     network_mode: "host"
     cap_add:
      - NET_ADMIN
-    image: "dtagdevsec/glutton:2204"
+    image: ${TPOT_REPO}/honeytrap:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/glutton/log:/var/log/glutton
+     - ${TPOT_DATA_PATH}/honeytrap/attacks:/opt/honeytrap/var/attacks
-#     - /root/tpotce/docker/glutton/dist/rules.yaml:/opt/glutton/rules/rules.yaml
+     - ${TPOT_DATA_PATH}/honeytrap/downloads:/opt/honeytrap/var/downloads
-
+     - ${TPOT_DATA_PATH}/honeytrap/log:/opt/honeytrap/var/log
-# Heralding service
-  heralding:
-    container_name: heralding
-    restart: always
-    tmpfs:
-     - /tmp/heralding:uid=2000,gid=2000
-    networks:
-     - heralding_local
-    ports:
-    # - "21:21"
-    # - "22:22"
-    # - "23:23"
-    # - "25:25"
-    # - "80:80"
-     - "110:110"
-     - "143:143"
-    # - "443:443"
-     - "465:465"
-     - "993:993"
-     - "995:995"
-    # - "3306:3306"
-    # - "3389:3389"
-     - "1080:1080"
-     - "5432:5432"
-     - "5900:5900"
-    image: "dtagdevsec/heralding:2204"
-    read_only: true
-    volumes:
-     - /data/heralding/log:/var/log/heralding
-
-# Ipphoney service
-  ipphoney:
-    container_name: ipphoney
-    restart: always
-    networks:
-     - ipphoney_local
-    ports:
-     - "631:631"
-    image: "dtagdevsec/ipphoney:2204"
-    read_only: true
-    volumes:
-     - /data/ipphoney/log:/opt/ipphoney/log
-
-# Mailoney service
-  mailoney:
-    container_name: mailoney
-    restart: always
-    environment:
-     - HPFEEDS_SERVER=
-     - HPFEEDS_IDENT=user
-     - HPFEEDS_SECRET=pass
-     - HPFEEDS_PORT=20000
-     - HPFEEDS_CHANNELPREFIX=prefix
-    networks:
-     - mailoney_local
-    ports:
-     - "25:25"
-    image: "dtagdevsec/mailoney:2204"
-    read_only: true
-    volumes:
-     - /data/mailoney/log:/opt/mailoney/logs
 
 # Medpot service
   medpot:
     container_name: medpot
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     networks:
      - medpot_local
     ports:
      - "2575:2575"
-    image: "dtagdevsec/medpot:2204"
+    image: ${TPOT_REPO}/medpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/medpot/log/:/var/log/medpot
+     - ${TPOT_DATA_PATH}/medpot/log/:/var/log/medpot
 
-# Redishoneypot service
-  redishoneypot:
-    container_name: redishoneypot
-    restart: always
-    networks:
-     - redishoneypot_local
-    ports:
-     - "6379:6379"
-    image: "dtagdevsec/redishoneypot:2204"
-    read_only: true
-    volumes:
-     - /data/redishoneypot/log:/var/log/redishoneypot
-
-# Hellpot service
-  hellpot:
-    container_name: hellpot
-    restart: always
-    networks:
-     - hellpot_local
-    ports:
-     - "80:8080"
-    image: "dtagdevsec/hellpot:2204"
-    read_only: true
-    volumes:
-     - /data/hellpot/log:/var/log/hellpot
 
 ##################
 #### NSM
@@ -383,42 +304,53 @@ services:
   fatt:
     container_name: fatt
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     network_mode: "host"
     cap_add:
      - NET_ADMIN
      - SYS_NICE
      - NET_RAW
-    image: "dtagdevsec/fatt:2204"
+    image: ${TPOT_REPO}/fatt:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     volumes:
-     - /data/fatt/log:/opt/fatt/log
+     - ${TPOT_DATA_PATH}/fatt/log:/opt/fatt/log
 
 # P0f service
   p0f:
     container_name: p0f
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     network_mode: "host"
-    image: "dtagdevsec/p0f:2204"
+    image: ${TPOT_REPO}/p0f:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/p0f/log:/var/log/p0f
+     - ${TPOT_DATA_PATH}/p0f/log:/var/log/p0f
 
 # Suricata service
   suricata:
     container_name: suricata
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     environment:
-    # For ET Pro ruleset replace "OPEN" with your OINKCODE
+     - OINKCODE=${OINKCODE:-OPEN} # Default to OPEN if unset or NULL (value provided by T-Pot .env)
-     - OINKCODE=OPEN
+    # Loading external Rules from URL
-    # Loading externel Rules from URL 
     # - FROMURL="https://username:password@yoururl.com|https://username:password@otherurl.com"
     network_mode: "host"
     cap_add:
      - NET_ADMIN
      - SYS_NICE
      - NET_RAW
-    image: "dtagdevsec/suricata:2204"
+    image: ${TPOT_REPO}/suricata:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     volumes:
-     - /data/suricata/log:/var/log/suricata
+     - ${TPOT_DATA_PATH}/suricata/log:/var/log/suricata
 
 
 ##################
@@ -430,6 +362,9 @@ services:
   elasticsearch:
     container_name: elasticsearch
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     environment:
      - bootstrap.memory_lock=true
      - ES_JAVA_OPTS=-Xms2048m -Xmx2048m
@@ -446,9 +381,10 @@ services:
     mem_limit: 4g
     ports:
      - "127.0.0.1:64298:9200"
-    image: "dtagdevsec/elasticsearch:2204"
+    image: ${TPOT_REPO}/elasticsearch:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     volumes:
-     - /data:/data
+     - ${TPOT_DATA_PATH}:/data
 
 ## Kibana service
   kibana:
@@ -460,46 +396,57 @@ services:
     mem_limit: 1g
     ports:
      - "127.0.0.1:64296:5601"
-    image: "dtagdevsec/kibana:2204"
+    image: ${TPOT_REPO}/kibana:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
 
 ## Logstash service
   logstash:
     container_name: logstash
     restart: always
-    environment:
-     - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
     depends_on:
       elasticsearch:
         condition: service_healthy
-    env_file:
+    environment:
-     - /opt/tpot/etc/compose/elk_environment
+     - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
+     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
+     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
+     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
+    ports:
+     - "127.0.0.1:64305:64305"
     mem_limit: 2g
-    image: "dtagdevsec/logstash:2204"
+    image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     volumes:
-     - /data:/data
+     - ${TPOT_DATA_PATH}:/data
 
 ## Map Redis Service
   map_redis:
     container_name: map_redis
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     stop_signal: SIGKILL
     tty: true
-    image: "dtagdevsec/redis:2204"
+    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
 
 ## Map Web Service
   map_web:
     container_name: map_web
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     environment:
      - MAP_COMMAND=AttackMapServer.py
-    env_file:
-     - /opt/tpot/etc/compose/elk_environment
     stop_signal: SIGKILL
     tty: true
     ports:
      - "127.0.0.1:64299:64299"
-    image: "dtagdevsec/map:2204"
+    image: ${TPOT_REPO}/map:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
 
 ## Map Data Service
   map_data:
@@ -510,17 +457,21 @@ services:
         condition: service_healthy
     environment:
      - MAP_COMMAND=DataServer_v2.py
-    env_file:
+     - TPOT_ATTACKMAP_TEXT=${TPOT_ATTACKMAP_TEXT}
-     - /opt/tpot/etc/compose/elk_environment
+     - TZ=${TPOT_ATTACKMAP_TEXT_TIMEZONE}
     stop_signal: SIGKILL
     tty: true
-    image: "dtagdevsec/map:2204"
+    image: ${TPOT_REPO}/map:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
 #### /ELK
 
 # Ewsposter service
   ewsposter:
     container_name: ewsposter
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     networks:
      - ewsposter_local
     environment:
@@ -532,17 +483,21 @@ services:
      - EWS_HPFEEDS_SECRET=secret
      - EWS_HPFEEDS_TLSCERT=false
      - EWS_HPFEEDS_FORMAT=json
-    env_file:
+    image: ${TPOT_REPO}/ewsposter:${TPOT_VERSION}
-     - /opt/tpot/etc/compose/elk_environment
+    pull_policy: ${TPOT_PULL_POLICY}
-    image: "dtagdevsec/ewsposter:2204"
     volumes:
-     - /data:/data
+     - ${TPOT_DATA_PATH}:/data
-     - /data/ews/conf/ews.ip:/opt/ewsposter/ews.ip
+     - ${TPOT_DATA_PATH}/ews/conf/ews.ip:/opt/ewsposter/ews.ip
 
 # Nginx service
   nginx:
     container_name: nginx
     restart: always
+    environment:
+      - TPOT_OSTYPE=${TPOT_OSTYPE}
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     tmpfs:
      - /var/tmp/nginx/client_body
      - /var/tmp/nginx/proxy
@@ -552,24 +507,29 @@ services:
      - /run
      - /var/lib/nginx/tmp:uid=100,gid=82
     network_mode: "host"
-      #    ports:
+    ports:
-      #     - "64297:64297"
+     - "64297:64297"
-      #     - "127.0.0.1:64304:64304"
+    image: ${TPOT_REPO}/nginx:${TPOT_VERSION}
-    image: "dtagdevsec/nginx:2204"
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/nginx/cert/:/etc/nginx/cert/:ro
+     - ${TPOT_DATA_PATH}/nginx/cert/:/etc/nginx/cert/:ro
-     - /data/nginx/conf/nginxpasswd:/etc/nginx/nginxpasswd:ro
+     - ${TPOT_DATA_PATH}/nginx/conf/nginxpasswd:/etc/nginx/nginxpasswd:ro
-     - /data/nginx/log/:/var/log/nginx/
+     - ${TPOT_DATA_PATH}/nginx/conf/lswebpasswd:/etc/nginx/lswebpasswd:ro
+     - ${TPOT_DATA_PATH}/nginx/log/:/var/log/nginx/
 
 # Spiderfoot service
   spiderfoot:
     container_name: spiderfoot
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     networks:
      - spiderfoot_local
     ports:
      - "127.0.0.1:64303:8080"
-    image: "dtagdevsec/spiderfoot:2204"
+    image: ${TPOT_REPO}/spiderfoot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     volumes:
-     - /data/spiderfoot:/home/spiderfoot/.spiderfoot
+     - ${TPOT_DATA_PATH}/spiderfoot:/home/spiderfoot/.spiderfoot

compose/mobile.yml

@@ -0,0 +1,628 @@
+# T-Pot: MOBILE
+# Note: This docker compose file has been adjusted to limit the number of tools, services and honeypots to run
+#       T-Pot on a Raspberry Pi 4 (8GB of RAM).
+#       The standard docker compose file should work mostly fine (depending on traffic) if you do not enable a
+#       desktop environment such as LXDE and meet the minimum requirements of 8GB RAM.
+version: '3.9'
+
+networks:
+  ciscoasa_local:
+  citrixhoneypot_local:
+  conpot_local_IEC104:
+  conpot_local_ipmi:
+  conpot_local_kamstrup_382:
+  cowrie_local:
+  dicompot_local:
+  dionaea_local:
+  elasticpot_local:
+  heralding_local:
+  ipphoney_local:
+  log4pot_local:
+  mailoney_local:
+  medpot_local:
+  redishoneypot_local:
+  sentrypeer_local:
+  tanner_local:
+  wordpot_local:
+  ewsposter_local:
+
+services:
+
+#########################################
+#### DEV
+#########################################
+#### T-Pot Init - Never delete this!
+#########################################
+
+# T-Pot Init Service
+  tpotinit:
+    container_name: tpotinit
+    env_file:
+      - .env
+    restart: always
+    stop_grace_period: 60s
+    tmpfs:
+      - /tmp/etc:uid=2000,gid=2000
+      - /tmp/:uid=2000,gid=2000
+    network_mode: "host"
+    cap_add:
+     - NET_ADMIN
+    image: ${TPOT_REPO}/tpotinit:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+      - ${TPOT_DOCKER_COMPOSE}:/tmp/tpot/docker-compose.yml:ro
+      - ${TPOT_DATA_PATH}/blackhole:/etc/blackhole
+      - ${TPOT_DATA_PATH}:/data
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+
+##################
+#### Honeypots
+##################
+
+# Ciscoasa service
+  ciscoasa:
+    container_name: ciscoasa
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    tmpfs:
+     - /tmp/ciscoasa:uid=2000,gid=2000
+    networks:
+     - ciscoasa_local
+    ports:
+     - "5000:5000/udp"
+     - "8443:8443"
+    image: ${TPOT_REPO}/ciscoasa:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/ciscoasa/log:/var/log/ciscoasa
+
+# CitrixHoneypot service
+  citrixhoneypot:
+    container_name: citrixhoneypot
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - citrixhoneypot_local
+    ports:
+     - "443:443"
+    image: ${TPOT_REPO}/citrixhoneypot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/citrixhoneypot/log:/opt/citrixhoneypot/logs
+
+# Conpot IEC104 service
+  conpot_IEC104:
+    container_name: conpot_iec104
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    environment:
+     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
+     - CONPOT_JSON_LOG=/var/log/conpot/conpot_IEC104.json
+     - CONPOT_LOG=/var/log/conpot/conpot_IEC104.log
+     - CONPOT_TEMPLATE=IEC104
+     - CONPOT_TMP=/tmp/conpot
+    tmpfs:
+     - /tmp/conpot:uid=2000,gid=2000
+    networks:
+     - conpot_local_IEC104
+    ports:
+     - "161:161/udp"
+     - "2404:2404"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
+
+# Conpot ipmi
+  conpot_ipmi:
+    container_name: conpot_ipmi
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    environment:
+     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
+     - CONPOT_JSON_LOG=/var/log/conpot/conpot_ipmi.json
+     - CONPOT_LOG=/var/log/conpot/conpot_ipmi.log
+     - CONPOT_TEMPLATE=ipmi
+     - CONPOT_TMP=/tmp/conpot
+    tmpfs:
+     - /tmp/conpot:uid=2000,gid=2000
+    networks:
+     - conpot_local_ipmi
+    ports:
+     - "623:623/udp"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
+
+# Conpot kamstrup_382
+  conpot_kamstrup_382:
+    container_name: conpot_kamstrup_382
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    environment:
+     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
+     - CONPOT_JSON_LOG=/var/log/conpot/conpot_kamstrup_382.json
+     - CONPOT_LOG=/var/log/conpot/conpot_kamstrup_382.log
+     - CONPOT_TEMPLATE=kamstrup_382
+     - CONPOT_TMP=/tmp/conpot
+    tmpfs:
+     - /tmp/conpot:uid=2000,gid=2000
+    networks:
+     - conpot_local_kamstrup_382
+    ports:
+     - "1025:1025"
+     - "50100:50100"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
+
+# Cowrie service
+  cowrie:
+    container_name: cowrie
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    tmpfs:
+      - /tmp/cowrie:uid=2000,gid=2000
+      - /tmp/cowrie/data:uid=2000,gid=2000
+    networks:
+      - cowrie_local
+    ports:
+      - "22:22"
+      - "23:23"
+    image: ${TPOT_REPO}/cowrie:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+      - ${TPOT_DATA_PATH}/cowrie/downloads:/home/cowrie/cowrie/dl
+      - ${TPOT_DATA_PATH}/cowrie/keys:/home/cowrie/cowrie/etc
+      - ${TPOT_DATA_PATH}/cowrie/log:/home/cowrie/cowrie/log
+      - ${TPOT_DATA_PATH}/cowrie/log/tty:/home/cowrie/cowrie/log/tty
+
+# Dicompot service
+# Get the Horos Client for testing: https://horosproject.org/
+# Get Dicom images (CC BY 3.0): https://www.cancerimagingarchive.net/collections/
+# Put images (which must be in Dicom DCM format or it will not work!) into /data/dicompot/images
+  dicompot:
+    container_name: dicompot
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - dicompot_local
+    ports:
+     - "11112:11112"
+    image: ${TPOT_REPO}/dicompot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/dicompot/log:/var/log/dicompot
+#     - ${TPOT_DATA_PATH}/dicompot/images:/opt/dicompot/images
+
+# Dionaea service
+  dionaea:
+    container_name: dionaea
+    stdin_open: true
+    tty: true
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - dionaea_local
+    ports:
+     - "20:20"
+     - "21:21"
+     - "42:42"
+     - "69:69/udp"
+     - "81:81"
+     - "135:135"
+     # - "443:443"
+     - "445:445"
+     - "1433:1433"
+     - "1723:1723"
+     - "1883:1883"
+     - "3306:3306"
+     # - "5060:5060"
+     # - "5060:5060/udp"
+     # - "5061:5061"
+     - "27017:27017"
+    image: ${TPOT_REPO}/dionaea:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/dionaea/roots/ftp:/opt/dionaea/var/dionaea/roots/ftp
+     - ${TPOT_DATA_PATH}/dionaea/roots/tftp:/opt/dionaea/var/dionaea/roots/tftp
+     - ${TPOT_DATA_PATH}/dionaea/roots/www:/opt/dionaea/var/dionaea/roots/www
+     - ${TPOT_DATA_PATH}/dionaea/roots/upnp:/opt/dionaea/var/dionaea/roots/upnp
+     - ${TPOT_DATA_PATH}/dionaea:/opt/dionaea/var/dionaea
+     - ${TPOT_DATA_PATH}/dionaea/binaries:/opt/dionaea/var/dionaea/binaries
+     - ${TPOT_DATA_PATH}/dionaea/log:/opt/dionaea/var/log
+     - ${TPOT_DATA_PATH}/dionaea/rtp:/opt/dionaea/var/dionaea/rtp
+
+# ElasticPot service
+  elasticpot:
+    container_name: elasticpot
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - elasticpot_local
+    ports:
+     - "9200:9200"
+    image: ${TPOT_REPO}/elasticpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/elasticpot/log:/opt/elasticpot/log
+
+# Heralding service
+  heralding:
+    container_name: heralding
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    tmpfs:
+     - /tmp/heralding:uid=2000,gid=2000
+    networks:
+     - heralding_local
+    ports:
+    # - "21:21"
+    # - "22:22"
+    # - "23:23"
+    # - "25:25"
+    # - "80:80"
+     - "110:110"
+     - "143:143"
+    # - "443:443"
+     - "465:465"
+     - "993:993"
+     - "995:995"
+    # - "3306:3306"
+    # - "3389:3389"
+     - "1080:1080"
+     - "5432:5432"
+     - "5900:5900"
+    image: ${TPOT_REPO}/heralding:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/heralding/log:/var/log/heralding
+
+# Honeytrap service
+  honeytrap:
+    container_name: honeytrap
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    tmpfs:
+     - /tmp/honeytrap:uid=2000,gid=2000
+    network_mode: "host"
+    cap_add:
+     - NET_ADMIN
+    image: ${TPOT_REPO}/honeytrap:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/honeytrap/attacks:/opt/honeytrap/var/attacks
+     - ${TPOT_DATA_PATH}/honeytrap/downloads:/opt/honeytrap/var/downloads
+     - ${TPOT_DATA_PATH}/honeytrap/log:/opt/honeytrap/var/log
+
+# Ipphoney service
+  ipphoney:
+    container_name: ipphoney
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - ipphoney_local
+    ports:
+     - "631:631"
+    image: ${TPOT_REPO}/ipphoney:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/ipphoney/log:/opt/ipphoney/log
+
+# Mailoney service
+  mailoney:
+    container_name: mailoney
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    environment:
+     - HPFEEDS_SERVER=
+     - HPFEEDS_IDENT=user
+     - HPFEEDS_SECRET=pass
+     - HPFEEDS_PORT=20000
+     - HPFEEDS_CHANNELPREFIX=prefix
+    networks:
+     - mailoney_local
+    ports:
+     - "25:25"
+     - "587:25"
+    image: ${TPOT_REPO}/mailoney:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/mailoney/log:/opt/mailoney/logs
+
+# Log4pot service
+  log4pot:
+    container_name: log4pot
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    tmpfs:
+     - /tmp:uid=2000,gid=2000
+    networks:
+     - log4pot_local
+    ports:
+    # - "80:8080"
+    # - "443:8080"
+     - "8080:8080"
+    # - "9200:8080"
+     - "25565:8080"
+    image: ${TPOT_REPO}/log4pot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/log4pot/log:/var/log/log4pot/log
+     - ${TPOT_DATA_PATH}/log4pot/payloads:/var/log/log4pot/payloads
+
+# Medpot service
+  medpot:
+    container_name: medpot
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - medpot_local
+    ports:
+     - "2575:2575"
+    image: ${TPOT_REPO}/medpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/medpot/log/:/var/log/medpot
+
+# Redishoneypot service
+  redishoneypot:
+    container_name: redishoneypot
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - redishoneypot_local
+    ports:
+     - "6379:6379"
+    image: ${TPOT_REPO}/redishoneypot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/redishoneypot/log:/var/log/redishoneypot
+
+# SentryPeer service
+  sentrypeer:
+    container_name: sentrypeer
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+#    environment:
+#     - SENTRYPEER_PEER_TO_PEER=1
+    networks:
+     - sentrypeer_local
+    ports:
+#     - "4222:4222/udp"
+     - "5060:5060/tcp"
+     - "5060:5060/udp"
+#     - "127.0.0.1:8082:8082"
+    image: ${TPOT_REPO}/sentrypeer:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/sentrypeer/log:/var/log/sentrypeer
+
+#### Snare / Tanner
+## Tanner Redis Service
+  tanner_redis:
+    container_name: tanner_redis
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    tty: true
+    networks:
+     - tanner_local
+    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+
+## PHP Sandbox service
+  tanner_phpox:
+    container_name: tanner_phpox
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    tty: true
+    networks:
+     - tanner_local
+    image: ${TPOT_REPO}/phpox:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+
+## Tanner API Service
+  tanner_api:
+    container_name: tanner_api
+    restart: always
+    depends_on:
+     - tanner_redis
+    tmpfs:
+     - /tmp/tanner:uid=2000,gid=2000
+    tty: true
+    networks:
+     - tanner_local
+    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
+    command: tannerapi
+
+## Tanner Service
+  tanner:
+    container_name: tanner
+    restart: always
+    depends_on:
+     - tanner_api
+     - tanner_phpox
+    tmpfs:
+     - /tmp/tanner:uid=2000,gid=2000
+    tty: true
+    networks:
+     - tanner_local
+    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    command: tanner
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
+     - ${TPOT_DATA_PATH}/tanner/files:/opt/tanner/files
+
+## Snare Service
+  snare:
+    container_name: snare
+    restart: always
+    depends_on:
+     - tanner
+    tty: true
+    networks:
+     - tanner_local
+    ports:
+     - "80:80"
+    image: ${TPOT_REPO}/snare:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+
+# Wordpot service
+  wordpot:
+    container_name: wordpot
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - wordpot_local
+    ports:
+     - "8080:80"
+    image: ${TPOT_REPO}/wordpot:${TPOT_VERSION}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/wordpot/log:/opt/wordpot/logs/
+
+
+##################
+#### Tools
+##################
+
+#### ELK
+## Elasticsearch service
+  elasticsearch:
+    container_name: elasticsearch
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    environment:
+     - bootstrap.memory_lock=true
+     - ES_JAVA_OPTS=-Xms2048m -Xmx2048m
+     - ES_TMPDIR=/tmp
+    cap_add:
+     - IPC_LOCK
+    ulimits:
+      memlock:
+        soft: -1
+        hard: -1
+      nofile:
+        soft: 65536
+        hard: 65536
+    mem_limit: 4g
+    ports:
+     - "127.0.0.1:64298:9200"
+    image: ${TPOT_REPO}/elasticsearch:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+     - ${TPOT_DATA_PATH}:/data
+
+## Logstash service
+  logstash:
+    container_name: logstash
+    restart: always
+    depends_on:
+      elasticsearch:
+        condition: service_healthy
+    environment:
+     - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
+     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
+     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
+     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
+    ports:
+     - "127.0.0.1:64305:64305"
+    mem_limit: 2g
+    image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+     - ${TPOT_DATA_PATH}:/data
+#### /ELK
+
+# Ewsposter service
+  ewsposter:
+    container_name: ewsposter
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - ewsposter_local
+    environment:
+     - EWS_HPFEEDS_ENABLE=false
+     - EWS_HPFEEDS_HOST=host
+     - EWS_HPFEEDS_PORT=port
+     - EWS_HPFEEDS_CHANNELS=channels
+     - EWS_HPFEEDS_IDENT=user
+     - EWS_HPFEEDS_SECRET=secret
+     - EWS_HPFEEDS_TLSCERT=false
+     - EWS_HPFEEDS_FORMAT=json
+    image: ${TPOT_REPO}/ewsposter:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+     - ${TPOT_DATA_PATH}:/data
+     - ${TPOT_DATA_PATH}/ews/conf/ews.ip:/opt/ewsposter/ews.ip

compose/raspberry_showcase.yml

@@ -0,0 +1,628 @@
+# T-Pot: MOBILE
+# Note: This docker compose file has been adjusted to limit the number of tools, services and honeypots to run
+#       T-Pot on a Raspberry Pi 4 (8GB of RAM).
+#       The standard docker compose file should work mostly fine (depending on traffic) if you do not enable a
+#       desktop environment such as LXDE and meet the minimum requirements of 8GB RAM.
+version: '3.9'
+
+networks:
+  ciscoasa_local:
+  citrixhoneypot_local:
+  conpot_local_IEC104:
+  conpot_local_ipmi:
+  conpot_local_kamstrup_382:
+  cowrie_local:
+  dicompot_local:
+  dionaea_local:
+  elasticpot_local:
+  heralding_local:
+  ipphoney_local:
+  log4pot_local:
+  mailoney_local:
+  medpot_local:
+  redishoneypot_local:
+  sentrypeer_local:
+  tanner_local:
+  wordpot_local:
+  ewsposter_local:
+
+services:
+
+#########################################
+#### DEV
+#########################################
+#### T-Pot Init - Never delete this!
+#########################################
+
+# T-Pot Init Service
+  tpotinit:
+    container_name: tpotinit
+    env_file:
+      - .env
+    restart: always
+    stop_grace_period: 60s
+    tmpfs:
+      - /tmp/etc:uid=2000,gid=2000
+      - /tmp/:uid=2000,gid=2000
+    network_mode: "host"
+    cap_add:
+     - NET_ADMIN
+    image: ${TPOT_REPO}/tpotinit:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+      - ${TPOT_DOCKER_COMPOSE}:/tmp/tpot/docker-compose.yml:ro
+      - ${TPOT_DATA_PATH}/blackhole:/etc/blackhole
+      - ${TPOT_DATA_PATH}:/data
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+
+##################
+#### Honeypots
+##################
+
+# Ciscoasa service
+  ciscoasa:
+    container_name: ciscoasa
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    tmpfs:
+     - /tmp/ciscoasa:uid=2000,gid=2000
+    networks:
+     - ciscoasa_local
+    ports:
+     - "5000:5000/udp"
+     - "8443:8443"
+    image: ${TPOT_REPO}/ciscoasa:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/ciscoasa/log:/var/log/ciscoasa
+
+# CitrixHoneypot service
+  citrixhoneypot:
+    container_name: citrixhoneypot
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - citrixhoneypot_local
+    ports:
+     - "443:443"
+    image: ${TPOT_REPO}/citrixhoneypot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/citrixhoneypot/log:/opt/citrixhoneypot/logs
+
+# Conpot IEC104 service
+  conpot_IEC104:
+    container_name: conpot_iec104
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    environment:
+     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
+     - CONPOT_JSON_LOG=/var/log/conpot/conpot_IEC104.json
+     - CONPOT_LOG=/var/log/conpot/conpot_IEC104.log
+     - CONPOT_TEMPLATE=IEC104
+     - CONPOT_TMP=/tmp/conpot
+    tmpfs:
+     - /tmp/conpot:uid=2000,gid=2000
+    networks:
+     - conpot_local_IEC104
+    ports:
+     - "161:161/udp"
+     - "2404:2404"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
+
+# Conpot ipmi
+  conpot_ipmi:
+    container_name: conpot_ipmi
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    environment:
+     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
+     - CONPOT_JSON_LOG=/var/log/conpot/conpot_ipmi.json
+     - CONPOT_LOG=/var/log/conpot/conpot_ipmi.log
+     - CONPOT_TEMPLATE=ipmi
+     - CONPOT_TMP=/tmp/conpot
+    tmpfs:
+     - /tmp/conpot:uid=2000,gid=2000
+    networks:
+     - conpot_local_ipmi
+    ports:
+     - "623:623/udp"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
+
+# Conpot kamstrup_382
+  conpot_kamstrup_382:
+    container_name: conpot_kamstrup_382
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    environment:
+     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
+     - CONPOT_JSON_LOG=/var/log/conpot/conpot_kamstrup_382.json
+     - CONPOT_LOG=/var/log/conpot/conpot_kamstrup_382.log
+     - CONPOT_TEMPLATE=kamstrup_382
+     - CONPOT_TMP=/tmp/conpot
+    tmpfs:
+     - /tmp/conpot:uid=2000,gid=2000
+    networks:
+     - conpot_local_kamstrup_382
+    ports:
+     - "1025:1025"
+     - "50100:50100"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
+
+# Cowrie service
+  cowrie:
+    container_name: cowrie
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    tmpfs:
+      - /tmp/cowrie:uid=2000,gid=2000
+      - /tmp/cowrie/data:uid=2000,gid=2000
+    networks:
+      - cowrie_local
+    ports:
+      - "22:22"
+      - "23:23"
+    image: ${TPOT_REPO}/cowrie:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+      - ${TPOT_DATA_PATH}/cowrie/downloads:/home/cowrie/cowrie/dl
+      - ${TPOT_DATA_PATH}/cowrie/keys:/home/cowrie/cowrie/etc
+      - ${TPOT_DATA_PATH}/cowrie/log:/home/cowrie/cowrie/log
+      - ${TPOT_DATA_PATH}/cowrie/log/tty:/home/cowrie/cowrie/log/tty
+
+# Dicompot service
+# Get the Horos Client for testing: https://horosproject.org/
+# Get Dicom images (CC BY 3.0): https://www.cancerimagingarchive.net/collections/
+# Put images (which must be in Dicom DCM format or it will not work!) into /data/dicompot/images
+  dicompot:
+    container_name: dicompot
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - dicompot_local
+    ports:
+     - "11112:11112"
+    image: ${TPOT_REPO}/dicompot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/dicompot/log:/var/log/dicompot
+#     - ${TPOT_DATA_PATH}/dicompot/images:/opt/dicompot/images
+
+# Dionaea service
+  dionaea:
+    container_name: dionaea
+    stdin_open: true
+    tty: true
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - dionaea_local
+    ports:
+     - "20:20"
+     - "21:21"
+     - "42:42"
+     - "69:69/udp"
+     - "81:81"
+     - "135:135"
+     # - "443:443"
+     - "445:445"
+     - "1433:1433"
+     - "1723:1723"
+     - "1883:1883"
+     - "3306:3306"
+     # - "5060:5060"
+     # - "5060:5060/udp"
+     # - "5061:5061"
+     - "27017:27017"
+    image: ${TPOT_REPO}/dionaea:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/dionaea/roots/ftp:/opt/dionaea/var/dionaea/roots/ftp
+     - ${TPOT_DATA_PATH}/dionaea/roots/tftp:/opt/dionaea/var/dionaea/roots/tftp
+     - ${TPOT_DATA_PATH}/dionaea/roots/www:/opt/dionaea/var/dionaea/roots/www
+     - ${TPOT_DATA_PATH}/dionaea/roots/upnp:/opt/dionaea/var/dionaea/roots/upnp
+     - ${TPOT_DATA_PATH}/dionaea:/opt/dionaea/var/dionaea
+     - ${TPOT_DATA_PATH}/dionaea/binaries:/opt/dionaea/var/dionaea/binaries
+     - ${TPOT_DATA_PATH}/dionaea/log:/opt/dionaea/var/log
+     - ${TPOT_DATA_PATH}/dionaea/rtp:/opt/dionaea/var/dionaea/rtp
+
+# ElasticPot service
+  elasticpot:
+    container_name: elasticpot
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - elasticpot_local
+    ports:
+     - "9200:9200"
+    image: ${TPOT_REPO}/elasticpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/elasticpot/log:/opt/elasticpot/log
+
+# Heralding service
+  heralding:
+    container_name: heralding
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    tmpfs:
+     - /tmp/heralding:uid=2000,gid=2000
+    networks:
+     - heralding_local
+    ports:
+    # - "21:21"
+    # - "22:22"
+    # - "23:23"
+    # - "25:25"
+    # - "80:80"
+     - "110:110"
+     - "143:143"
+    # - "443:443"
+     - "465:465"
+     - "993:993"
+     - "995:995"
+    # - "3306:3306"
+    # - "3389:3389"
+     - "1080:1080"
+     - "5432:5432"
+     - "5900:5900"
+    image: ${TPOT_REPO}/heralding:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/heralding/log:/var/log/heralding
+
+# Honeytrap service
+  honeytrap:
+    container_name: honeytrap
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    tmpfs:
+     - /tmp/honeytrap:uid=2000,gid=2000
+    network_mode: "host"
+    cap_add:
+     - NET_ADMIN
+    image: ${TPOT_REPO}/honeytrap:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/honeytrap/attacks:/opt/honeytrap/var/attacks
+     - ${TPOT_DATA_PATH}/honeytrap/downloads:/opt/honeytrap/var/downloads
+     - ${TPOT_DATA_PATH}/honeytrap/log:/opt/honeytrap/var/log
+
+# Ipphoney service
+  ipphoney:
+    container_name: ipphoney
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - ipphoney_local
+    ports:
+     - "631:631"
+    image: ${TPOT_REPO}/ipphoney:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/ipphoney/log:/opt/ipphoney/log
+
+# Mailoney service
+  mailoney:
+    container_name: mailoney
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    environment:
+     - HPFEEDS_SERVER=
+     - HPFEEDS_IDENT=user
+     - HPFEEDS_SECRET=pass
+     - HPFEEDS_PORT=20000
+     - HPFEEDS_CHANNELPREFIX=prefix
+    networks:
+     - mailoney_local
+    ports:
+     - "25:25"
+     - "587:25"
+    image: ${TPOT_REPO}/mailoney:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/mailoney/log:/opt/mailoney/logs
+
+# Log4pot service
+  log4pot:
+    container_name: log4pot
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    tmpfs:
+     - /tmp:uid=2000,gid=2000
+    networks:
+     - log4pot_local
+    ports:
+    # - "80:8080"
+    # - "443:8080"
+     - "8080:8080"
+    # - "9200:8080"
+     - "25565:8080"
+    image: ${TPOT_REPO}/log4pot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/log4pot/log:/var/log/log4pot/log
+     - ${TPOT_DATA_PATH}/log4pot/payloads:/var/log/log4pot/payloads
+
+# Medpot service
+  medpot:
+    container_name: medpot
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - medpot_local
+    ports:
+     - "2575:2575"
+    image: ${TPOT_REPO}/medpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/medpot/log/:/var/log/medpot
+
+# Redishoneypot service
+  redishoneypot:
+    container_name: redishoneypot
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - redishoneypot_local
+    ports:
+     - "6379:6379"
+    image: ${TPOT_REPO}/redishoneypot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/redishoneypot/log:/var/log/redishoneypot
+
+# SentryPeer service
+  sentrypeer:
+    container_name: sentrypeer
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+#    environment:
+#     - SENTRYPEER_PEER_TO_PEER=1
+    networks:
+     - sentrypeer_local
+    ports:
+#     - "4222:4222/udp"
+     - "5060:5060/tcp"
+     - "5060:5060/udp"
+#     - "127.0.0.1:8082:8082"
+    image: ${TPOT_REPO}/sentrypeer:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/sentrypeer/log:/var/log/sentrypeer
+
+#### Snare / Tanner
+## Tanner Redis Service
+  tanner_redis:
+    container_name: tanner_redis
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    tty: true
+    networks:
+     - tanner_local
+    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+
+## PHP Sandbox service
+  tanner_phpox:
+    container_name: tanner_phpox
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    tty: true
+    networks:
+     - tanner_local
+    image: ${TPOT_REPO}/phpox:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+
+## Tanner API Service
+  tanner_api:
+    container_name: tanner_api
+    restart: always
+    depends_on:
+     - tanner_redis
+    tmpfs:
+     - /tmp/tanner:uid=2000,gid=2000
+    tty: true
+    networks:
+     - tanner_local
+    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
+    command: tannerapi
+
+## Tanner Service
+  tanner:
+    container_name: tanner
+    restart: always
+    depends_on:
+     - tanner_api
+     - tanner_phpox
+    tmpfs:
+     - /tmp/tanner:uid=2000,gid=2000
+    tty: true
+    networks:
+     - tanner_local
+    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    command: tanner
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
+     - ${TPOT_DATA_PATH}/tanner/files:/opt/tanner/files
+
+## Snare Service
+  snare:
+    container_name: snare
+    restart: always
+    depends_on:
+     - tanner
+    tty: true
+    networks:
+     - tanner_local
+    ports:
+     - "80:80"
+    image: ${TPOT_REPO}/snare:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+
+# Wordpot service
+  wordpot:
+    container_name: wordpot
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - wordpot_local
+    ports:
+     - "82:80"
+    image: ${TPOT_REPO}/wordpot:${TPOT_VERSION}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/wordpot/log:/opt/wordpot/logs/
+
+
+##################
+#### Tools
+##################
+
+#### ELK
+## Elasticsearch service
+  elasticsearch:
+    container_name: elasticsearch
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    environment:
+     - bootstrap.memory_lock=true
+     - ES_JAVA_OPTS=-Xms2048m -Xmx2048m
+     - ES_TMPDIR=/tmp
+    cap_add:
+     - IPC_LOCK
+    ulimits:
+      memlock:
+        soft: -1
+        hard: -1
+      nofile:
+        soft: 65536
+        hard: 65536
+    mem_limit: 4g
+    ports:
+     - "127.0.0.1:64298:9200"
+    image: ${TPOT_REPO}/elasticsearch:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+     - ${TPOT_DATA_PATH}:/data
+
+## Logstash service
+  logstash:
+    container_name: logstash
+    restart: always
+    depends_on:
+      elasticsearch:
+        condition: service_healthy
+    environment:
+     - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
+     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
+     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
+     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
+    ports:
+     - "127.0.0.1:64305:64305"
+    mem_limit: 2g
+    image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+     - ${TPOT_DATA_PATH}:/data
+#### /ELK
+
+# Ewsposter service
+  ewsposter:
+    container_name: ewsposter
+    restart: always
+    depends_on:
+      logstash:
+        condition: service_healthy
+    networks:
+     - ewsposter_local
+    environment:
+     - EWS_HPFEEDS_ENABLE=false
+     - EWS_HPFEEDS_HOST=host
+     - EWS_HPFEEDS_PORT=port
+     - EWS_HPFEEDS_CHANNELS=channels
+     - EWS_HPFEEDS_IDENT=user
+     - EWS_HPFEEDS_SECRET=secret
+     - EWS_HPFEEDS_TLSCERT=false
+     - EWS_HPFEEDS_FORMAT=json
+    image: ${TPOT_REPO}/ewsposter:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+     - ${TPOT_DATA_PATH}:/data
+     - ${TPOT_DATA_PATH}/ews/conf/ews.ip:/opt/ewsposter/ews.ip

compose/sensor.yml

@@ -1,6 +1,5 @@
-# T-Pot (Standard)
+# T-Pot: SENSOR
-# Do not erase ports sections, these are used by /opt/tpot/bin/rules.sh to setup iptables ACCEPT rules for NFQ (honeytrap / glutton)
+version: '3.9'
-version: '2.3'
 
 networks:
   adbhoney_local:
@@ -20,13 +19,40 @@ networks:
   mailoney_local:
   medpot_local:
   redishoneypot_local:
-  tanner_local:
-  ewsposter_local:
   sentrypeer_local:
-  spiderfoot_local:
+  tanner_local:
+  wordpot_local:
+  ewsposter_local:
 
 services:
 
+#########################################
+#### DEV
+#########################################
+#### T-Pot Init - Never delete this!
+#########################################
+
+# T-Pot Init Service
+  tpotinit:
+    container_name: tpotinit
+    env_file:
+      - .env
+    restart: always
+    stop_grace_period: 60s
+    tmpfs:
+      - /tmp/etc:uid=2000,gid=2000
+      - /tmp/:uid=2000,gid=2000
+    network_mode: "host"
+    cap_add:
+     - NET_ADMIN
+    image: ${TPOT_REPO}/tpotinit:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+      - ${TPOT_DOCKER_COMPOSE}:/tmp/tpot/docker-compose.yml:ro
+      - ${TPOT_DATA_PATH}/blackhole:/etc/blackhole
+      - ${TPOT_DATA_PATH}:/data
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+
 ##################
 #### Honeypots
 ##################
@@ -35,20 +61,27 @@ services:
   adbhoney:
     container_name: adbhoney
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     networks:
      - adbhoney_local
     ports:
      - "5555:5555"
-    image: "dtagdevsec/adbhoney:2204"
+    image: ${TPOT_REPO}/adbhoney:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/adbhoney/log:/opt/adbhoney/log
+     - ${TPOT_DATA_PATH}/adbhoney/log:/opt/adbhoney/log
-     - /data/adbhoney/downloads:/opt/adbhoney/dl
+     - ${TPOT_DATA_PATH}/adbhoney/downloads:/opt/adbhoney/dl
 
 # Ciscoasa service
   ciscoasa:
     container_name: ciscoasa
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     tmpfs:
      - /tmp/ciscoasa:uid=2000,gid=2000
     networks:
@@ -56,28 +89,36 @@ services:
     ports:
      - "5000:5000/udp"
      - "8443:8443"
-    image: "dtagdevsec/ciscoasa:2204"
+    image: ${TPOT_REPO}/ciscoasa:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/ciscoasa/log:/var/log/ciscoasa
+     - ${TPOT_DATA_PATH}/ciscoasa/log:/var/log/ciscoasa
 
 # CitrixHoneypot service
   citrixhoneypot:
     container_name: citrixhoneypot
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     networks:
      - citrixhoneypot_local
     ports:
      - "443:443"
-    image: "dtagdevsec/citrixhoneypot:2204"
+    image: ${TPOT_REPO}/citrixhoneypot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/citrixhoneypot/logs:/opt/citrixhoneypot/logs
+     - ${TPOT_DATA_PATH}/citrixhoneypot/log:/opt/citrixhoneypot/logs
 
 # Conpot IEC104 service
   conpot_IEC104:
     container_name: conpot_iec104
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     environment:
      - CONPOT_CONFIG=/etc/conpot/conpot.cfg
      - CONPOT_JSON_LOG=/var/log/conpot/conpot_IEC104.json
@@ -91,15 +132,19 @@ services:
     ports:
      - "161:161/udp"
      - "2404:2404"
-    image: "dtagdevsec/conpot:2204"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/conpot/log:/var/log/conpot
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
 
 # Conpot guardian_ast service
   conpot_guardian_ast:
     container_name: conpot_guardian_ast
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     environment:
      - CONPOT_CONFIG=/etc/conpot/conpot.cfg
      - CONPOT_JSON_LOG=/var/log/conpot/conpot_guardian_ast.json
@@ -112,15 +157,19 @@ services:
      - conpot_local_guardian_ast
     ports:
      - "10001:10001"
-    image: "dtagdevsec/conpot:2204"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/conpot/log:/var/log/conpot
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
 
 # Conpot ipmi
   conpot_ipmi:
     container_name: conpot_ipmi
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     environment:
      - CONPOT_CONFIG=/etc/conpot/conpot.cfg
      - CONPOT_JSON_LOG=/var/log/conpot/conpot_ipmi.json
@@ -133,15 +182,19 @@ services:
      - conpot_local_ipmi
     ports:
      - "623:623/udp"
-    image: "dtagdevsec/conpot:2204"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/conpot/log:/var/log/conpot
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
 
 # Conpot kamstrup_382
   conpot_kamstrup_382:
     container_name: conpot_kamstrup_382
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     environment:
      - CONPOT_CONFIG=/etc/conpot/conpot.cfg
      - CONPOT_JSON_LOG=/var/log/conpot/conpot_kamstrup_382.json
@@ -155,15 +208,19 @@ services:
     ports:
      - "1025:1025"
      - "50100:50100"
-    image: "dtagdevsec/conpot:2204"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/conpot/log:/var/log/conpot
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
 
 # Cowrie service
   cowrie:
     container_name: cowrie
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     tmpfs:
       - /tmp/cowrie:uid=2000,gid=2000
       - /tmp/cowrie/data:uid=2000,gid=2000
@@ -172,18 +229,22 @@ services:
     ports:
       - "22:22"
       - "23:23"
-    image: "dtagdevsec/cowrie:2204"
+    image: ${TPOT_REPO}/cowrie:${TPOT_VERSION} 
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/cowrie/downloads:/home/cowrie/cowrie/dl
+      - ${TPOT_DATA_PATH}/cowrie/downloads:/home/cowrie/cowrie/dl
-     - /data/cowrie/keys:/home/cowrie/cowrie/etc
+      - ${TPOT_DATA_PATH}/cowrie/keys:/home/cowrie/cowrie/etc
-     - /data/cowrie/log:/home/cowrie/cowrie/log
+      - ${TPOT_DATA_PATH}/cowrie/log:/home/cowrie/cowrie/log
-     - /data/cowrie/log/tty:/home/cowrie/cowrie/log/tty
+      - ${TPOT_DATA_PATH}/cowrie/log/tty:/home/cowrie/cowrie/log/tty
 
 # Ddospot service
   ddospot:
     container_name: ddospot
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     networks:
      - ddospot_local
     ports:
@@ -192,12 +253,13 @@ services:
      - "123:123/udp"
 #     - "161:161/udp"
      - "1900:1900/udp"
-    image: "dtagdevsec/ddospot:2204"
+    image: ${TPOT_REPO}/ddospot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/ddospot/log:/opt/ddospot/ddospot/logs
+     - ${TPOT_DATA_PATH}/ddospot/log:/opt/ddospot/ddospot/logs
-     - /data/ddospot/bl:/opt/ddospot/ddospot/bl
+     - ${TPOT_DATA_PATH}/ddospot/bl:/opt/ddospot/ddospot/bl
-     - /data/ddospot/db:/opt/ddospot/ddospot/db
+     - ${TPOT_DATA_PATH}/ddospot/db:/opt/ddospot/ddospot/db
 
 # Dicompot service
 # Get the Horos Client for testing: https://horosproject.org/
@@ -206,15 +268,19 @@ services:
   dicompot:
     container_name: dicompot
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     networks:
      - dicompot_local
     ports:
      - "11112:11112"
-    image: "dtagdevsec/dicompot:2204"
+    image: ${TPOT_REPO}/dicompot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/dicompot/log:/var/log/dicompot
+     - ${TPOT_DATA_PATH}/dicompot/log:/var/log/dicompot
-#     - /data/dicompot/images:/opt/dicompot/images
+#     - ${TPOT_DATA_PATH}/dicompot/images:/opt/dicompot/images
 
 # Dionaea service
   dionaea:
@@ -222,6 +288,9 @@ services:
     stdin_open: true
     tty: true
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     networks:
      - dionaea_local
     ports:
@@ -241,35 +310,43 @@ services:
      # - "5060:5060/udp"
      # - "5061:5061"
      - "27017:27017"
-    image: "dtagdevsec/dionaea:2204"
+    image: ${TPOT_REPO}/dionaea:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/dionaea/roots/ftp:/opt/dionaea/var/dionaea/roots/ftp
+     - ${TPOT_DATA_PATH}/dionaea/roots/ftp:/opt/dionaea/var/dionaea/roots/ftp
-     - /data/dionaea/roots/tftp:/opt/dionaea/var/dionaea/roots/tftp
+     - ${TPOT_DATA_PATH}/dionaea/roots/tftp:/opt/dionaea/var/dionaea/roots/tftp
-     - /data/dionaea/roots/www:/opt/dionaea/var/dionaea/roots/www
+     - ${TPOT_DATA_PATH}/dionaea/roots/www:/opt/dionaea/var/dionaea/roots/www
-     - /data/dionaea/roots/upnp:/opt/dionaea/var/dionaea/roots/upnp
+     - ${TPOT_DATA_PATH}/dionaea/roots/upnp:/opt/dionaea/var/dionaea/roots/upnp
-     - /data/dionaea:/opt/dionaea/var/dionaea
+     - ${TPOT_DATA_PATH}/dionaea:/opt/dionaea/var/dionaea
-     - /data/dionaea/binaries:/opt/dionaea/var/dionaea/binaries
+     - ${TPOT_DATA_PATH}/dionaea/binaries:/opt/dionaea/var/dionaea/binaries
-     - /data/dionaea/log:/opt/dionaea/var/log
+     - ${TPOT_DATA_PATH}/dionaea/log:/opt/dionaea/var/log
-     - /data/dionaea/rtp:/opt/dionaea/var/dionaea/rtp
+     - ${TPOT_DATA_PATH}/dionaea/rtp:/opt/dionaea/var/dionaea/rtp
 
 # ElasticPot service
   elasticpot:
     container_name: elasticpot
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     networks:
      - elasticpot_local
     ports:
      - "9200:9200"
-    image: "dtagdevsec/elasticpot:2204"
+    image: ${TPOT_REPO}/elasticpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/elasticpot/log:/opt/elasticpot/log
+     - ${TPOT_DATA_PATH}/elasticpot/log:/opt/elasticpot/log
 
 # Heralding service
   heralding:
     container_name: heralding
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     tmpfs:
      - /tmp/heralding:uid=2000,gid=2000
     networks:
@@ -291,44 +368,56 @@ services:
      - "1080:1080"
      - "5432:5432"
      - "5900:5900"
-    image: "dtagdevsec/heralding:2204"
+    image: ${TPOT_REPO}/heralding:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/heralding/log:/var/log/heralding
+     - ${TPOT_DATA_PATH}/heralding/log:/var/log/heralding
 
 # Honeytrap service
   honeytrap:
     container_name: honeytrap
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     tmpfs:
      - /tmp/honeytrap:uid=2000,gid=2000
     network_mode: "host"
     cap_add:
      - NET_ADMIN
-    image: "dtagdevsec/honeytrap:2204"
+    image: ${TPOT_REPO}/honeytrap:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/honeytrap/attacks:/opt/honeytrap/var/attacks
+     - ${TPOT_DATA_PATH}/honeytrap/attacks:/opt/honeytrap/var/attacks
-     - /data/honeytrap/downloads:/opt/honeytrap/var/downloads
+     - ${TPOT_DATA_PATH}/honeytrap/downloads:/opt/honeytrap/var/downloads
-     - /data/honeytrap/log:/opt/honeytrap/var/log
+     - ${TPOT_DATA_PATH}/honeytrap/log:/opt/honeytrap/var/log
 
 # Ipphoney service
   ipphoney:
     container_name: ipphoney
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     networks:
      - ipphoney_local
     ports:
      - "631:631"
-    image: "dtagdevsec/ipphoney:2204"
+    image: ${TPOT_REPO}/ipphoney:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/ipphoney/log:/opt/ipphoney/log
+     - ${TPOT_DATA_PATH}/ipphoney/log:/opt/ipphoney/log
 
 # Mailoney service
   mailoney:
     container_name: mailoney
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     environment:
      - HPFEEDS_SERVER=
      - HPFEEDS_IDENT=user
@@ -339,127 +428,165 @@ services:
      - mailoney_local
     ports:
      - "25:25"
-    image: "dtagdevsec/mailoney:2204"
+     - "587:25"
+    image: ${TPOT_REPO}/mailoney:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/mailoney/log:/opt/mailoney/logs
+     - ${TPOT_DATA_PATH}/mailoney/log:/opt/mailoney/logs
 
 # Medpot service
   medpot:
     container_name: medpot
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     networks:
      - medpot_local
     ports:
      - "2575:2575"
-    image: "dtagdevsec/medpot:2204"
+    image: ${TPOT_REPO}/medpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/medpot/log/:/var/log/medpot
+     - ${TPOT_DATA_PATH}/medpot/log/:/var/log/medpot
 
 # Redishoneypot service
   redishoneypot:
     container_name: redishoneypot
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     networks:
      - redishoneypot_local
     ports:
      - "6379:6379"
-    image: "dtagdevsec/redishoneypot:2204"
+    image: ${TPOT_REPO}/redishoneypot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/redishoneypot/log:/var/log/redishoneypot
+     - ${TPOT_DATA_PATH}/redishoneypot/log:/var/log/redishoneypot
 
 # SentryPeer service
   sentrypeer:
     container_name: sentrypeer
     restart: always
-# SentryPeer offers to exchange bad actor data via DHT / P2P mode by setting the ENV to true (1)
+    depends_on:
-# In some cases (i.e. internally deployed T-Pots) this might be confusing as SentryPeer will show
+      tpotinit:
-# the bad actors in its logs. Therefore this option is opt-in based.
+        condition: service_healthy
 #    environment:
-#     - SENTRYPEER_PEER_TO_PEER=0
+#     - SENTRYPEER_PEER_TO_PEER=1
     networks:
      - sentrypeer_local
     ports:
 #     - "4222:4222/udp"
+     - "5060:5060/tcp"
      - "5060:5060/udp"
 #     - "127.0.0.1:8082:8082"
-    image: "dtagdevsec/sentrypeer:2204"
+    image: ${TPOT_REPO}/sentrypeer:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/sentrypeer/log:/var/log/sentrypeer
+     - ${TPOT_DATA_PATH}/sentrypeer/log:/var/log/sentrypeer
 
 #### Snare / Tanner
 ## Tanner Redis Service
   tanner_redis:
     container_name: tanner_redis
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     tty: true
     networks:
      - tanner_local
-    image: "dtagdevsec/redis:2204"
+    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
 
 ## PHP Sandbox service
   tanner_phpox:
     container_name: tanner_phpox
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     tty: true
     networks:
      - tanner_local
-    image: "dtagdevsec/phpox:2204"
+    image: ${TPOT_REPO}/phpox:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
 
 ## Tanner API Service
   tanner_api:
     container_name: tanner_api
     restart: always
+    depends_on:
+     - tanner_redis
     tmpfs:
      - /tmp/tanner:uid=2000,gid=2000
     tty: true
     networks:
      - tanner_local
-    image: "dtagdevsec/tanner:2204"
+    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/tanner/log:/var/log/tanner
+     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
     command: tannerapi
-    depends_on:
-     - tanner_redis
 
 ## Tanner Service
   tanner:
     container_name: tanner
     restart: always
+    depends_on:
+     - tanner_api
+     - tanner_phpox
     tmpfs:
      - /tmp/tanner:uid=2000,gid=2000
     tty: true
     networks:
      - tanner_local
-    image: "dtagdevsec/tanner:2204"
+    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     command: tanner
     read_only: true
     volumes:
-     - /data/tanner/log:/var/log/tanner
+     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
-     - /data/tanner/files:/opt/tanner/files
+     - ${TPOT_DATA_PATH}/tanner/files:/opt/tanner/files
-    depends_on:
-     - tanner_api
-#     - tanner_web
-     - tanner_phpox
 
 ## Snare Service
   snare:
     container_name: snare
     restart: always
+    depends_on:
+     - tanner
     tty: true
     networks:
      - tanner_local
     ports:
      - "80:80"
-    image: "dtagdevsec/snare:2204"
+    image: ${TPOT_REPO}/snare:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+
+# Wordpot service
+  wordpot:
+    container_name: wordpot
+    restart: always
     depends_on:
-     - tanner
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - wordpot_local
+    ports:
+     - "8080:80"
+    image: ${TPOT_REPO}/wordpot:${TPOT_VERSION}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/wordpot/log:/opt/wordpot/logs/
 
 
 ##################
@@ -470,42 +597,53 @@ services:
   fatt:
     container_name: fatt
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     network_mode: "host"
     cap_add:
      - NET_ADMIN
      - SYS_NICE
      - NET_RAW
-    image: "dtagdevsec/fatt:2204"
+    image: ${TPOT_REPO}/fatt:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     volumes:
-     - /data/fatt/log:/opt/fatt/log
+     - ${TPOT_DATA_PATH}/fatt/log:/opt/fatt/log
 
 # P0f service
   p0f:
     container_name: p0f
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     network_mode: "host"
-    image: "dtagdevsec/p0f:2204"
+    image: ${TPOT_REPO}/p0f:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - /data/p0f/log:/var/log/p0f
+     - ${TPOT_DATA_PATH}/p0f/log:/var/log/p0f
 
 # Suricata service
   suricata:
     container_name: suricata
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     environment:
-    # For ET Pro ruleset replace "OPEN" with your OINKCODE
+     - OINKCODE=${OINKCODE:-OPEN} # Default to OPEN if unset or NULL (value provided by T-Pot .env)
-     - OINKCODE=OPEN
+    # Loading external Rules from URL
-    # Loading externel Rules from URL 
     # - FROMURL="https://username:password@yoururl.com|https://username:password@otherurl.com"
     network_mode: "host"
     cap_add:
      - NET_ADMIN
      - SYS_NICE
      - NET_RAW
-    image: "dtagdevsec/suricata:2204"
+    image: ${TPOT_REPO}/suricata:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
     volumes:
-     - /data/suricata/log:/var/log/suricata
+     - ${TPOT_DATA_PATH}/suricata/log:/var/log/suricata
 
 
 ##################
@@ -513,101 +651,36 @@ services:
 ##################
 
 #### ELK
-## Elasticsearch service
-  elasticsearch:
-    container_name: elasticsearch
-    restart: always
-    environment:
-     - bootstrap.memory_lock=true
-     - ES_JAVA_OPTS=-Xms2048m -Xmx2048m
-     - ES_TMPDIR=/tmp
-    cap_add:
-     - IPC_LOCK
-    ulimits:
-      memlock:
-        soft: -1
-        hard: -1
-      nofile:
-        soft: 65536
-        hard: 65536
-    mem_limit: 4g
-    ports:
-     - "127.0.0.1:64298:9200"
-    image: "dtagdevsec/elasticsearch:2204"
-    volumes:
-     - /data:/data
-
-## Kibana service
-  kibana:
-    container_name: kibana
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    mem_limit: 1g
-    ports:
-     - "127.0.0.1:64296:5601"
-    image: "dtagdevsec/kibana:2204"
 
 ## Logstash service
   logstash:
     container_name: logstash
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     environment:
      - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
-    depends_on:
+     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
-      elasticsearch:
+     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
-        condition: service_healthy
+     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
-    env_file:
-     - /opt/tpot/etc/compose/elk_environment
-    mem_limit: 2g
-    image: "dtagdevsec/logstash:2204"
-    volumes:
-     - /data:/data
-
-## Map Redis Service
-  map_redis:
-    container_name: map_redis
-    restart: always
-    stop_signal: SIGKILL
-    tty: true
-    image: "dtagdevsec/redis:2204"
-    read_only: true
-
-## Map Web Service
-  map_web:
-    container_name: map_web
-    restart: always
-    environment:
-     - MAP_COMMAND=AttackMapServer.py
-    env_file:
-     - /opt/tpot/etc/compose/elk_environment
-    stop_signal: SIGKILL
-    tty: true
     ports:
-     - "127.0.0.1:64299:64299"
+     - "127.0.0.1:64305:64305"
-    image: "dtagdevsec/map:2204"
+    mem_limit: 2g
+    image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+     - ${TPOT_DATA_PATH}:/data
 
-## Map Data Service
-  map_data:
-    container_name: map_data
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    environment:
-     - MAP_COMMAND=DataServer_v2.py
-    env_file:
-     - /opt/tpot/etc/compose/elk_environment
-    stop_signal: SIGKILL
-    tty: true
-    image: "dtagdevsec/map:2204"
 #### /ELK
 
 # Ewsposter service
   ewsposter:
     container_name: ewsposter
     restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
     networks:
      - ewsposter_local
     environment:
@@ -619,44 +692,8 @@ services:
      - EWS_HPFEEDS_SECRET=secret
      - EWS_HPFEEDS_TLSCERT=false
      - EWS_HPFEEDS_FORMAT=json
-    env_file:
+    image: ${TPOT_REPO}/ewsposter:${TPOT_VERSION}
-     - /opt/tpot/etc/compose/elk_environment
+    pull_policy: ${TPOT_PULL_POLICY}
-    image: "dtagdevsec/ewsposter:2204"
     volumes:
-     - /data:/data
+     - ${TPOT_DATA_PATH}:/data
-     - /data/ews/conf/ews.ip:/opt/ewsposter/ews.ip
+     - ${TPOT_DATA_PATH}/ews/conf/ews.ip:/opt/ewsposter/ews.ip
-
-# Nginx service
-  nginx:
-    container_name: nginx
-    restart: always
-    tmpfs:
-     - /var/tmp/nginx/client_body
-     - /var/tmp/nginx/proxy
-     - /var/tmp/nginx/fastcgi
-     - /var/tmp/nginx/uwsgi
-     - /var/tmp/nginx/scgi
-     - /run
-     - /var/lib/nginx/tmp:uid=100,gid=82
-    network_mode: "host"
-      #    ports:
-      #     - "64297:64297"
-      #     - "127.0.0.1:64304:64304"
-    image: "dtagdevsec/nginx:2204"
-    read_only: true
-    volumes:
-     - /data/nginx/cert/:/etc/nginx/cert/:ro
-     - /data/nginx/conf/nginxpasswd:/etc/nginx/nginxpasswd:ro
-     - /data/nginx/log/:/var/log/nginx/
-
-# Spiderfoot service
-  spiderfoot:
-    container_name: spiderfoot
-    restart: always
-    networks:
-     - spiderfoot_local
-    ports:
-     - "127.0.0.1:64303:8080"
-    image: "dtagdevsec/spiderfoot:2204"
-    volumes:
-     - /data/spiderfoot:/home/spiderfoot/.spiderfoot

compose/standard.yml

@@ -1,3 +1,4 @@
+# T-Pot: STANDARD
 version: '3.9'
 
 networks:
@@ -21,23 +22,24 @@ networks:
   sentrypeer_local:
   tanner_local:
   spiderfoot_local:
+  wordpot_local:
   ewsposter_local:
 
 services:
 
-##############################################
+#########################################
 #### DEV
-##############################################
+#########################################
-#### T-Pot Light Init - Never delete this!
+#### T-Pot Init - Never delete this!
-##############################################
+#########################################
 
 # T-Pot Init Service
   tpotinit:
     container_name: tpotinit
-    build: docker/.
     env_file:
       - .env
     restart: always
+    stop_grace_period: 60s
     tmpfs:
       - /tmp/etc:uid=2000,gid=2000
       - /tmp/:uid=2000,gid=2000
@@ -50,6 +52,7 @@ services:
       - ${TPOT_DOCKER_COMPOSE}:/tmp/tpot/docker-compose.yml:ro
       - ${TPOT_DATA_PATH}/blackhole:/etc/blackhole
       - ${TPOT_DATA_PATH}:/data
+      - /var/run/docker.sock:/var/run/docker.sock:ro
 
 
 ##################
@@ -109,7 +112,7 @@ services:
     pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - ${TPOT_DATA_PATH}/citrixhoneypot/logs:/opt/citrixhoneypot/logs
+     - ${TPOT_DATA_PATH}/citrixhoneypot/log:/opt/citrixhoneypot/logs
 
 # Conpot IEC104 service
   conpot_IEC104:
@@ -427,6 +430,7 @@ services:
      - mailoney_local
     ports:
      - "25:25"
+     - "587:25"
     image: ${TPOT_REPO}/mailoney:${TPOT_VERSION}
     pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
@@ -474,15 +478,13 @@ services:
     depends_on:
       tpotinit:
         condition: service_healthy
-# SentryPeer offers to exchange bad actor data via DHT / P2P mode by setting the ENV to true (1)
-# In some cases (i.e. internally deployed T-Pots) this might be confusing as SentryPeer will show
-# the bad actors in its logs. Therefore this option is opt-in based.
 #    environment:
-#     - SENTRYPEER_PEER_TO_PEER=0
+#     - SENTRYPEER_PEER_TO_PEER=1
     networks:
      - sentrypeer_local
     ports:
 #     - "4222:4222/udp"
+     - "5060:5060/tcp"
      - "5060:5060/udp"
 #     - "127.0.0.1:8082:8082"
     image: ${TPOT_REPO}/sentrypeer:${TPOT_VERSION}
@@ -572,6 +574,22 @@ services:
     image: ${TPOT_REPO}/snare:${TPOT_VERSION}
     pull_policy: ${TPOT_PULL_POLICY}
 
+# Wordpot service
+  wordpot:
+    container_name: wordpot
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - wordpot_local
+    ports:
+     - "8080:80"
+    image: ${TPOT_REPO}/wordpot:${TPOT_VERSION}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/wordpot/log:/opt/wordpot/logs/
+
 
 ##################
 #### NSM
@@ -616,9 +634,8 @@ services:
       tpotinit:
         condition: service_healthy
     environment:
-    # For ET Pro ruleset replace "OPEN" with your OINKCODE
+     - OINKCODE=${OINKCODE:-OPEN} # Default to OPEN if unset or NULL (value provided by T-Pot .env)
-     - OINKCODE=OPEN
+    # Loading external Rules from URL
-    # Loading externel Rules from URL
     # - FROMURL="https://username:password@yoururl.com|https://username:password@otherurl.com"
     network_mode: "host"
     cap_add:
@@ -686,6 +703,11 @@ services:
         condition: service_healthy
     environment:
      - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
+     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
+     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
+     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
+    ports:
+     - "127.0.0.1:64305:64305"
     mem_limit: 2g
     image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
     pull_policy: ${TPOT_PULL_POLICY}
@@ -730,6 +752,8 @@ services:
         condition: service_healthy
     environment:
      - MAP_COMMAND=DataServer_v2.py
+     - TPOT_ATTACKMAP_TEXT=${TPOT_ATTACKMAP_TEXT}
+     - TZ=${TPOT_ATTACKMAP_TEXT_TIMEZONE}
     stop_signal: SIGKILL
     tty: true
     image: ${TPOT_REPO}/map:${TPOT_VERSION}
@@ -765,7 +789,6 @@ services:
     container_name: nginx
     restart: always
     environment:
-      - COCKPIT=${COCKPIT}
       - TPOT_OSTYPE=${TPOT_OSTYPE}
     depends_on:
       tpotinit:
@@ -781,13 +804,13 @@ services:
     network_mode: "host"
     ports:
      - "64297:64297"
-     - "127.0.0.1:64304:64304"
     image: ${TPOT_REPO}/nginx:${TPOT_VERSION}
     pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
      - ${TPOT_DATA_PATH}/nginx/cert/:/etc/nginx/cert/:ro
      - ${TPOT_DATA_PATH}/nginx/conf/nginxpasswd:/etc/nginx/nginxpasswd:ro
+     - ${TPOT_DATA_PATH}/nginx/conf/lswebpasswd:/etc/nginx/lswebpasswd:ro
      - ${TPOT_DATA_PATH}/nginx/log/:/var/log/nginx/
 
 # Spiderfoot service

compose/tpot_services.yml

@@ -0,0 +1,961 @@
+# T-Pot: Docker Services Base Configuration
+#        This is only to be used with the T-Pot Customizer
+#        Editing the contents may result in broken custom configurations!
+
+networks:
+  adbhoney_local:
+  ciscoasa_local:
+  citrixhoneypot_local:
+  conpot_local_IEC104:
+  conpot_local_guardian_ast:
+  conpot_local_ipmi:
+  conpot_local_kamstrup_382:
+  cowrie_local:
+  ddospot_local:
+  dicompot_local:
+  dionaea_local:
+  elasticpot_local:
+  endlessh_local:
+  hellpot_local:
+  heralding_local:
+  honeypots_local:
+  ipphoney_local:
+  log4pot_local:
+  mailoney_local:
+  medpot_local:
+  redishoneypot_local:
+  sentrypeer_local:
+  tanner_local:
+  wordpot_local:
+  spiderfoot_local:
+  ewsposter_local:
+
+services:
+
+#########################################
+#### DEV
+#########################################
+#### T-Pot Init - Never delete this!
+#########################################
+
+# T-Pot Init Service
+  tpotinit:
+    container_name: tpotinit
+    env_file:
+      - .env
+    restart: always
+    stop_grace_period: 60s
+    tmpfs:
+      - /tmp/etc:uid=2000,gid=2000
+      - /tmp/:uid=2000,gid=2000
+    network_mode: "host"
+    cap_add:
+     - NET_ADMIN
+    image: ${TPOT_REPO}/tpotinit:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+      - ${TPOT_DOCKER_COMPOSE}:/tmp/tpot/docker-compose.yml:ro
+      - ${TPOT_DATA_PATH}/blackhole:/etc/blackhole
+      - ${TPOT_DATA_PATH}:/data
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+
+##################
+#### Honeypots
+##################
+
+# Adbhoney service
+  adbhoney:
+    container_name: adbhoney
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - adbhoney_local
+    ports:
+     - "5555:5555"
+    image: ${TPOT_REPO}/adbhoney:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/adbhoney/log:/opt/adbhoney/log
+     - ${TPOT_DATA_PATH}/adbhoney/downloads:/opt/adbhoney/dl
+
+# Ciscoasa service
+  ciscoasa:
+    container_name: ciscoasa
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    tmpfs:
+     - /tmp/ciscoasa:uid=2000,gid=2000
+    networks:
+     - ciscoasa_local
+    ports:
+     - "5000:5000/udp"
+     - "8443:8443"
+    image: ${TPOT_REPO}/ciscoasa:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/ciscoasa/log:/var/log/ciscoasa
+
+# CitrixHoneypot service
+  citrixhoneypot:
+    container_name: citrixhoneypot
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - citrixhoneypot_local
+    ports:
+     - "443:443"
+    image: ${TPOT_REPO}/citrixhoneypot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/citrixhoneypot/log:/opt/citrixhoneypot/logs
+
+# Conpot IEC104 service
+  conpot_IEC104:
+    container_name: conpot_iec104
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    environment:
+     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
+     - CONPOT_JSON_LOG=/var/log/conpot/conpot_IEC104.json
+     - CONPOT_LOG=/var/log/conpot/conpot_IEC104.log
+     - CONPOT_TEMPLATE=IEC104
+     - CONPOT_TMP=/tmp/conpot
+    tmpfs:
+     - /tmp/conpot:uid=2000,gid=2000
+    networks:
+     - conpot_local_IEC104
+    ports:
+     - "161:161/udp"
+     - "2404:2404"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
+
+# Conpot guardian_ast service
+  conpot_guardian_ast:
+    container_name: conpot_guardian_ast
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    environment:
+     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
+     - CONPOT_JSON_LOG=/var/log/conpot/conpot_guardian_ast.json
+     - CONPOT_LOG=/var/log/conpot/conpot_guardian_ast.log
+     - CONPOT_TEMPLATE=guardian_ast
+     - CONPOT_TMP=/tmp/conpot
+    tmpfs:
+     - /tmp/conpot:uid=2000,gid=2000
+    networks:
+     - conpot_local_guardian_ast
+    ports:
+     - "10001:10001"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
+
+# Conpot ipmi
+  conpot_ipmi:
+    container_name: conpot_ipmi
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    environment:
+     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
+     - CONPOT_JSON_LOG=/var/log/conpot/conpot_ipmi.json
+     - CONPOT_LOG=/var/log/conpot/conpot_ipmi.log
+     - CONPOT_TEMPLATE=ipmi
+     - CONPOT_TMP=/tmp/conpot
+    tmpfs:
+     - /tmp/conpot:uid=2000,gid=2000
+    networks:
+     - conpot_local_ipmi
+    ports:
+     - "623:623/udp"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
+
+# Conpot kamstrup_382
+  conpot_kamstrup_382:
+    container_name: conpot_kamstrup_382
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    environment:
+     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
+     - CONPOT_JSON_LOG=/var/log/conpot/conpot_kamstrup_382.json
+     - CONPOT_LOG=/var/log/conpot/conpot_kamstrup_382.log
+     - CONPOT_TEMPLATE=kamstrup_382
+     - CONPOT_TMP=/tmp/conpot
+    tmpfs:
+     - /tmp/conpot:uid=2000,gid=2000
+    networks:
+     - conpot_local_kamstrup_382
+    ports:
+     - "1025:1025"
+     - "50100:50100"
+    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
+
+# Cowrie service
+  cowrie:
+    container_name: cowrie
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    tmpfs:
+      - /tmp/cowrie:uid=2000,gid=2000
+      - /tmp/cowrie/data:uid=2000,gid=2000
+    networks:
+      - cowrie_local
+    ports:
+      - "22:22"
+      - "23:23"
+    image: ${TPOT_REPO}/cowrie:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+      - ${TPOT_DATA_PATH}/cowrie/downloads:/home/cowrie/cowrie/dl
+      - ${TPOT_DATA_PATH}/cowrie/keys:/home/cowrie/cowrie/etc
+      - ${TPOT_DATA_PATH}/cowrie/log:/home/cowrie/cowrie/log
+      - ${TPOT_DATA_PATH}/cowrie/log/tty:/home/cowrie/cowrie/log/tty
+
+# Ddospot service
+  ddospot:
+    container_name: ddospot
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - ddospot_local
+    ports:
+     - "19:19/udp"
+     - "53:53/udp"
+     - "123:123/udp"
+#     - "161:161/udp"
+     - "1900:1900/udp"
+    image: ${TPOT_REPO}/ddospot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/ddospot/log:/opt/ddospot/ddospot/logs
+     - ${TPOT_DATA_PATH}/ddospot/bl:/opt/ddospot/ddospot/bl
+     - ${TPOT_DATA_PATH}/ddospot/db:/opt/ddospot/ddospot/db
+
+# Dicompot service
+# Get the Horos Client for testing: https://horosproject.org/
+# Get Dicom images (CC BY 3.0): https://www.cancerimagingarchive.net/collections/
+# Put images (which must be in Dicom DCM format or it will not work!) into /data/dicompot/images
+  dicompot:
+    container_name: dicompot
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - dicompot_local
+    ports:
+     - "11112:11112"
+    image: ${TPOT_REPO}/dicompot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/dicompot/log:/var/log/dicompot
+#     - ${TPOT_DATA_PATH}/dicompot/images:/opt/dicompot/images
+
+# Dionaea service
+  dionaea:
+    container_name: dionaea
+    stdin_open: true
+    tty: true
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - dionaea_local
+    ports:
+     - "20:20"
+     - "21:21"
+     - "42:42"
+     - "69:69/udp"
+     - "81:81"
+     - "135:135"
+     # - "443:443"
+     - "445:445"
+     - "1433:1433"
+     - "1723:1723"
+     - "1883:1883"
+     - "3306:3306"
+     # - "5060:5060"
+     # - "5060:5060/udp"
+     # - "5061:5061"
+     - "27017:27017"
+    image: ${TPOT_REPO}/dionaea:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/dionaea/roots/ftp:/opt/dionaea/var/dionaea/roots/ftp
+     - ${TPOT_DATA_PATH}/dionaea/roots/tftp:/opt/dionaea/var/dionaea/roots/tftp
+     - ${TPOT_DATA_PATH}/dionaea/roots/www:/opt/dionaea/var/dionaea/roots/www
+     - ${TPOT_DATA_PATH}/dionaea/roots/upnp:/opt/dionaea/var/dionaea/roots/upnp
+     - ${TPOT_DATA_PATH}/dionaea:/opt/dionaea/var/dionaea
+     - ${TPOT_DATA_PATH}/dionaea/binaries:/opt/dionaea/var/dionaea/binaries
+     - ${TPOT_DATA_PATH}/dionaea/log:/opt/dionaea/var/log
+     - ${TPOT_DATA_PATH}/dionaea/rtp:/opt/dionaea/var/dionaea/rtp
+
+# ElasticPot service
+  elasticpot:
+    container_name: elasticpot
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - elasticpot_local
+    ports:
+     - "9200:9200"
+    image: ${TPOT_REPO}/elasticpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/elasticpot/log:/opt/elasticpot/log
+
+# Endlessh service
+  endlessh:
+    container_name: endlessh
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - endlessh_local
+    ports:
+     - "22:2222"
+    image: ${TPOT_REPO}/endlessh:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/endlessh/log:/var/log/endlessh
+
+# # Glutton service
+  # glutton:
+    # container_name: glutton
+    # restart: always
+    # depends_on:
+      # tpotinit:
+        # condition: service_healthy
+    # tmpfs:
+     # - /var/lib/glutton:uid=2000,gid=2000
+     # - /run:uid=2000,gid=2000
+    # network_mode: "host"
+    # cap_add:
+     # - NET_ADMIN
+    # image: ${TPOT_REPO}/glutton:${TPOT_VERSION}
+    # pull_policy: ${TPOT_PULL_POLICY}
+    # read_only: true
+    # volumes:
+     # - ${TPOT_DATA_PATH}/glutton/log:/var/log/glutton
+     # - ${TPOT_DATA_PATH}/glutton/payloads:/opt/glutton/payloads
+
+# Hellpot service
+  hellpot:
+    container_name: hellpot
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - hellpot_local
+    ports:
+     - "80:8080"
+    image: ${TPOT_REPO}/hellpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/hellpot/log:/var/log/hellpot
+
+# Heralding service
+  heralding:
+    container_name: heralding
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    tmpfs:
+     - /tmp/heralding:uid=2000,gid=2000
+    networks:
+     - heralding_local
+    ports:
+    # - "21:21"
+    # - "22:22"
+    # - "23:23"
+    # - "25:25"
+    # - "80:80"
+     - "110:110"
+     - "143:143"
+    # - "443:443"
+     - "465:465"
+     - "993:993"
+     - "995:995"
+    # - "3306:3306"
+    # - "3389:3389"
+     - "1080:1080"
+     - "5432:5432"
+     - "5900:5900"
+    image: ${TPOT_REPO}/heralding:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/heralding/log:/var/log/heralding
+
+# Honeypots service
+  honeypots:
+    container_name: honeypots
+    stdin_open: true
+    tty: true
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    tmpfs:
+     - /tmp:uid=2000,gid=2000
+    networks:
+     - honeypots_local
+    ports:
+     - "21:21"
+     - "22:22"
+     - "23:23"
+     - "25:25"
+     - "53:53/udp"
+     - "80:80"
+     - "110:110"
+     - "123:123"
+     - "143:143"
+     - "161:161"
+     - "389:389"
+     - "443:443"
+     - "445:445"
+     - "631:631"
+     - "1080:1080"
+     - "1433:1433"
+     - "1521:1521"
+     - "3306:3306"
+     - "3389:3389"
+     - "5060:5060"
+     - "5432:5432"
+     - "5900:5900"
+     - "6379:6379"
+     - "6667:6667"
+     - "8080:8080"
+     - "9100:9100"
+     - "9200:9200"
+     - "11211:11211"
+    image: ${TPOT_REPO}/honeypots:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/honeypots/log:/var/log/honeypots
+
+# Honeytrap service
+  honeytrap:
+    container_name: honeytrap
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    tmpfs:
+     - /tmp/honeytrap:uid=2000,gid=2000
+    network_mode: "host"
+    cap_add:
+     - NET_ADMIN
+    image: ${TPOT_REPO}/honeytrap:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/honeytrap/attacks:/opt/honeytrap/var/attacks
+     - ${TPOT_DATA_PATH}/honeytrap/downloads:/opt/honeytrap/var/downloads
+     - ${TPOT_DATA_PATH}/honeytrap/log:/opt/honeytrap/var/log
+
+# Ipphoney service
+  ipphoney:
+    container_name: ipphoney
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - ipphoney_local
+    ports:
+     - "631:631"
+    image: ${TPOT_REPO}/ipphoney:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/ipphoney/log:/opt/ipphoney/log
+
+# Log4pot service
+  log4pot:
+    container_name: log4pot
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    tmpfs:
+     - /tmp:uid=2000,gid=2000
+    networks:
+     - log4pot_local
+    ports:
+     - "80:8080"
+     - "443:8080"
+     - "8080:8080"
+     - "9200:8080"
+     - "25565:8080"
+    image: ${TPOT_REPO}/log4pot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/log4pot/log:/var/log/log4pot/log
+     - ${TPOT_DATA_PATH}/log4pot/payloads:/var/log/log4pot/payloads
+
+# Mailoney service
+  mailoney:
+    container_name: mailoney
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    environment:
+     - HPFEEDS_SERVER=
+     - HPFEEDS_IDENT=user
+     - HPFEEDS_SECRET=pass
+     - HPFEEDS_PORT=20000
+     - HPFEEDS_CHANNELPREFIX=prefix
+    networks:
+     - mailoney_local
+    ports:
+     - "25:25"
+     - "587:25"
+    image: ${TPOT_REPO}/mailoney:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/mailoney/log:/opt/mailoney/logs
+
+# Medpot service
+  medpot:
+    container_name: medpot
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - medpot_local
+    ports:
+     - "2575:2575"
+    image: ${TPOT_REPO}/medpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/medpot/log/:/var/log/medpot
+
+# Redishoneypot service
+  redishoneypot:
+    container_name: redishoneypot
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - redishoneypot_local
+    ports:
+     - "6379:6379"
+    image: ${TPOT_REPO}/redishoneypot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/redishoneypot/log:/var/log/redishoneypot
+
+# SentryPeer service
+  sentrypeer:
+    container_name: sentrypeer
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+#    environment:
+#     - SENTRYPEER_PEER_TO_PEER=1
+    networks:
+     - sentrypeer_local
+    ports:
+#     - "4222:4222/udp"
+     - "5060:5060/tcp"
+     - "5060:5060/udp"
+#     - "127.0.0.1:8082:8082"
+    image: ${TPOT_REPO}/sentrypeer:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/sentrypeer/log:/var/log/sentrypeer
+
+#### Snare / Tanner
+## Tanner Redis Service
+  tanner_redis:
+    container_name: tanner_redis
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    tty: true
+    networks:
+     - tanner_local
+    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+
+## PHP Sandbox service
+  tanner_phpox:
+    container_name: tanner_phpox
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    tty: true
+    networks:
+     - tanner_local
+    image: ${TPOT_REPO}/phpox:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+
+## Tanner API service
+  tanner_api:
+    container_name: tanner_api
+    restart: always
+    depends_on:
+     - tanner_redis
+    tmpfs:
+     - /tmp/tanner:uid=2000,gid=2000
+    tty: true
+    networks:
+     - tanner_local
+    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
+    command: tannerapi
+
+## Tanner service
+  tanner:
+    container_name: tanner
+    restart: always
+    depends_on:
+     - tanner_api
+     - tanner_phpox
+    tmpfs:
+     - /tmp/tanner:uid=2000,gid=2000
+    tty: true
+    networks:
+     - tanner_local
+    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    command: tanner
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
+     - ${TPOT_DATA_PATH}/tanner/files:/opt/tanner/files
+
+## Snare service
+  snare:
+    container_name: snare
+    restart: always
+    depends_on:
+     - tanner
+    tty: true
+    networks:
+     - tanner_local
+    ports:
+     - "80:80"
+    image: ${TPOT_REPO}/snare:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+
+# Wordpot service
+  wordpot:
+    container_name: wordpot
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - wordpot_local
+    ports:
+     - "80:80"
+    image: ${TPOT_REPO}/wordpot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/wordpot/log:/opt/wordpot/logs/
+
+
+##################
+#### NSM
+##################
+
+# Fatt service
+  fatt:
+    container_name: fatt
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    network_mode: "host"
+    cap_add:
+     - NET_ADMIN
+     - SYS_NICE
+     - NET_RAW
+    image: ${TPOT_REPO}/fatt:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+     - ${TPOT_DATA_PATH}/fatt/log:/opt/fatt/log
+
+# P0f service
+  p0f:
+    container_name: p0f
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    network_mode: "host"
+    image: ${TPOT_REPO}/p0f:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/p0f/log:/var/log/p0f
+
+# Suricata service
+  suricata:
+    container_name: suricata
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    environment:
+     - OINKCODE=${OINKCODE:-OPEN} # Default to OPEN if unset or NULL (value provided by T-Pot .env)
+    # Loading external Rules from URL
+    # - FROMURL="https://username:password@yoururl.com|https://username:password@otherurl.com"
+    network_mode: "host"
+    cap_add:
+     - NET_ADMIN
+     - SYS_NICE
+     - NET_RAW
+    image: ${TPOT_REPO}/suricata:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+     - ${TPOT_DATA_PATH}/suricata/log:/var/log/suricata
+
+
+##################
+#### Tools
+##################
+
+#### ELK
+## Elasticsearch service
+  elasticsearch:
+    container_name: elasticsearch
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    environment:
+     - bootstrap.memory_lock=true
+     - ES_JAVA_OPTS=-Xms2048m -Xmx2048m
+     - ES_TMPDIR=/tmp
+    cap_add:
+     - IPC_LOCK
+    ulimits:
+      memlock:
+        soft: -1
+        hard: -1
+      nofile:
+        soft: 65536
+        hard: 65536
+    mem_limit: 4g
+    ports:
+     - "127.0.0.1:64298:9200"
+    image: ${TPOT_REPO}/elasticsearch:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+     - ${TPOT_DATA_PATH}:/data
+
+## Kibana service
+  kibana:
+    container_name: kibana
+    restart: always
+    depends_on:
+      elasticsearch:
+        condition: service_healthy
+    mem_limit: 1g
+    ports:
+     - "127.0.0.1:64296:5601"
+    image: ${TPOT_REPO}/kibana:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+
+## Logstash service
+  logstash:
+    container_name: logstash
+    restart: always
+    depends_on:
+      elasticsearch:
+        condition: service_healthy
+    environment:
+     - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
+     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
+     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
+     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
+    ports:
+     - "127.0.0.1:64305:64305"
+    mem_limit: 2g
+    image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+     - ${TPOT_DATA_PATH}:/data
+
+## Map Redis Service
+  map_redis:
+    container_name: map_redis
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    stop_signal: SIGKILL
+    tty: true
+    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+
+## Map Web Service
+  map_web:
+    container_name: map_web
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    environment:
+     - MAP_COMMAND=AttackMapServer.py
+    stop_signal: SIGKILL
+    tty: true
+    ports:
+     - "127.0.0.1:64299:64299"
+    image: ${TPOT_REPO}/map:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+
+## Map Data Service
+  map_data:
+    container_name: map_data
+    restart: always
+    depends_on:
+      elasticsearch:
+        condition: service_healthy
+    environment:
+     - MAP_COMMAND=DataServer_v2.py
+     - TPOT_ATTACKMAP_TEXT=${TPOT_ATTACKMAP_TEXT}
+     - TZ=${TPOT_ATTACKMAP_TEXT_TIMEZONE}
+    stop_signal: SIGKILL
+    tty: true
+    image: ${TPOT_REPO}/map:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+#### /ELK
+
+# Ewsposter service
+  ewsposter:
+    container_name: ewsposter
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - ewsposter_local
+    environment:
+     - EWS_HPFEEDS_ENABLE=false
+     - EWS_HPFEEDS_HOST=host
+     - EWS_HPFEEDS_PORT=port
+     - EWS_HPFEEDS_CHANNELS=channels
+     - EWS_HPFEEDS_IDENT=user
+     - EWS_HPFEEDS_SECRET=secret
+     - EWS_HPFEEDS_TLSCERT=false
+     - EWS_HPFEEDS_FORMAT=json
+    image: ${TPOT_REPO}/ewsposter:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+     - ${TPOT_DATA_PATH}:/data
+     - ${TPOT_DATA_PATH}/ews/conf/ews.ip:/opt/ewsposter/ews.ip
+
+# Nginx service
+  nginx:
+    container_name: nginx
+    restart: always
+    environment:
+     - TPOT_OSTYPE=${TPOT_OSTYPE}
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    tmpfs:
+     - /var/tmp/nginx/client_body
+     - /var/tmp/nginx/proxy
+     - /var/tmp/nginx/fastcgi
+     - /var/tmp/nginx/uwsgi
+     - /var/tmp/nginx/scgi
+     - /run
+     - /var/lib/nginx/tmp:uid=100,gid=82
+    network_mode: "host"
+    ports:
+     - "64297:64297"
+    image: ${TPOT_REPO}/nginx:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/nginx/cert/:/etc/nginx/cert/:ro
+     - ${TPOT_DATA_PATH}/nginx/conf/nginxpasswd:/etc/nginx/nginxpasswd:ro
+     - ${TPOT_DATA_PATH}/nginx/conf/lswebpasswd:/etc/nginx/lswebpasswd:ro
+     - ${TPOT_DATA_PATH}/nginx/log/:/var/log/nginx/
+
+# Spiderfoot service
+  spiderfoot:
+    container_name: spiderfoot
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - spiderfoot_local
+    ports:
+     - "127.0.0.1:64303:8080"
+    image: ${TPOT_REPO}/spiderfoot:${TPOT_VERSION}
+    pull_policy: ${TPOT_PULL_POLICY}
+    volumes:
+     - ${TPOT_DATA_PATH}/spiderfoot:/home/spiderfoot/.spiderfoot

deploy.sh

@@ -0,0 +1,153 @@
+#!/usr/bin/env bash
+
+myANSIBLE_PORT=64295
+myANSIBLE_TPOT_PLAYBOOK="installer/install/deploy.yml"
+myADJECTIVE=$(shuf -n1 installer/install/a.txt)
+myNOUN=$(shuf -n1 installer/install/n.txt)
+myENV_FILE="$HOME/tpotce/.env"
+
+myDEPLOY=$(cat << "EOF"
+
+ ____   [ T-Pot ]                  ____             _
+/ ___|  ___ _ __  ___  ___  _ __  |  _ \  ___ _ __ | | ___  _   _
+\___ \ / _ \  _ \/ __|/ _ \|  __| | | | |/ _ \  _ \| |/ _ \| | | |
+ ___) |  __/ | | \__ \ (_) | |    | |_| |  __/ |_) | | (_) | |_| |
+|____/ \___|_| |_|___/\___/|_|    |____/ \___| .__/|_|\___/ \__, |
+                                             |_|            |___/
+
+EOF
+)
+
+# Check if the script is running in a HIVE installation
+if ! grep -q 'TPOT_TYPE=HIVE' "$HOME/tpotce/.env";
+  then
+    echo "# This script is only supported on HIVE installations."
+    echo
+    exit 1
+fi
+
+# Check if running on a supported distribution
+mySUPPORTED_DISTRIBUTIONS=("AlmaLinux" "Debian GNU/Linux" "Fedora Linux" "openSUSE Tumbleweed" "Raspbian GNU/Linux" "Rocky Linux" "Ubuntu")
+myCURRENT_DISTRIBUTION=$(awk -F= '/^NAME/{print $2}' /etc/os-release | tr -d '"')
+
+if [[ ! " ${mySUPPORTED_DISTRIBUTIONS[@]} " =~ " ${myCURRENT_DISTRIBUTION} " ]];
+  then
+    echo "# Only the following distributions are supported: AlmaLinux, Fedora, Debian, openSUSE Tumbleweed, Rocky Linux and Ubuntu."
+    echo
+    exit 1
+fi
+
+echo "${myDEPLOY}"
+echo
+echo "# This script will prepare a T-Pot SENSOR installation to transmit logs into this HIVE."
+echo
+
+# Ask if a T-Pot SENSOR was installed
+read -p "# Was a T-Pot SENSOR installed? (y/n): " mySENSOR_INSTALLED
+if [[ ${mySENSOR_INSTALLED} != "y" ]]; 
+    then
+      echo "# A T-Pot SENSOR must be installed to continue."
+      exit 1
+fi
+
+# Ask for the remote user
+read -p "# Enter the remote username T-Pot SENSOR was installed with: " mySSHUSER
+if [[ ${mySSHUSER} == "" ]]; 
+    then
+      echo "# You need to enter a user. Aborting."
+      exit 1
+fi
+
+# Validate IP/domain name loop
+while true; do
+  read -p "# Enter the IP/domain name of the SENSOR: " mySENSOR_IP
+  if [[ ${mySENSOR_IP} =~ ^([a-zA-Z0-9]+(\.[a-zA-Z0-9]+)*\.[a-zA-Z]{2,})|(([0-9]{1,3}\.){3}[0-9]{1,3})$ ]];
+    then
+      break
+    else
+      echo "# Invalid IP/domain. Please enter a valid IP or domain name."
+  fi
+done
+
+# Check if ssh key has been deployed
+read -p "# Has a SSH key been deployed to the SENSOR? (y/n): " mySSHKEY_DEPLOYED
+if [[ ${mySSHKEY_DEPLOYED} != "y" ]]; 
+    then
+      echo "# Generate a SSH key using 'ssh-keygen' and deploy it to the SENSOR (Example: ssh-copy-id -p 64295 ${mySSHUSER}@${mySENSOR_IP})."
+      exit 1
+fi
+
+# Validate IP/domain name of HIVE
+while true; do
+  read -p "# Enter the IP/domain name of this HIVE: " myTPOT_HIVE_IP
+  if [[ ${myTPOT_HIVE_IP} =~ ^([a-zA-Z0-9]+(\.[a-zA-Z0-9]+)*\.[a-zA-Z]{2,})|(([0-9]{1,3}\.){3}[0-9]{1,3})$ ]]; 
+    then
+      break
+    else
+      echo "# Invalid IP/domain. Please enter a valid IP or domain name."
+  fi
+done
+
+# Create a random SENSOR user name that is easily readable
+myLS_WEB_USER="sensor-${myADJECTIVE}-${myNOUN}"
+
+# Create a random password
+myLS_WEB_PW=$(tr -dc 'a-zA-Z0-9' < /dev/urandom | fold -w 32 | head -n 1)
+
+# Create myLS_WEB_USER_ENC
+myLS_WEB_USER_ENC=$(htpasswd -b -n "${myLS_WEB_USER}" "${myLS_WEB_PW}")
+myLS_WEB_USER_ENC_B64=$(echo -n "${myLS_WEB_USER_ENC}" | base64 -w0)
+
+# Create myTPOT_HIVE_USER, since this is for Logstash on the SENSOR, it needs to directly base64 encoded
+myTPOT_HIVE_USER=$(echo -n "${myLS_WEB_USER}:${myLS_WEB_PW}" | base64 -w0)
+
+# Print credentials
+echo "# The following SENSOR credentials have been created:"
+echo "# New SENSOR username: ${myLS_WEB_USER}"
+echo "# New SENSOR passowrd: ${myLS_WEB_PW}"
+echo "# New htpasswd encoded credentials: ${myLS_WEB_USER_ENC}"
+echo "# New htpasswd credentials base64 encoded: ${myLS_WEB_USER_ENC_B64}"
+echo "# New SENSOR credentials base64 encoded: ${myTPOT_HIVE_USER}"
+echo
+echo "# Ansible will ask for the ‘BECOME password‘ which is typically the password you ’sudo’ with on the SENSOR."
+echo "# The password will allow Ansible to run a reboot via sudo on the SENSOR."
+echo
+
+# Read LS_WEB_USER from file
+myENV_LS_WEB_USER=$(grep "^LS_WEB_USER=" "${myENV_FILE}" | sed 's/^LS_WEB_USER=//g' | tr -d "\"'")
+
+# Add the new SENSOR user
+if [ "${myENV_LS_WEB_USER}" == "" ];
+  then
+    myENV_LS_WEB_USER="${myLS_WEB_USER_ENC_B64}"
+  else
+    myENV_LS_WEB_USER="${myENV_LS_WEB_USER} ${myLS_WEB_USER_ENC_B64}"
+fi
+
+# Need to export for Ansible
+export myTPOT_HIVE_USER
+export myTPOT_HIVE_IP
+
+ANSIBLE_LOG_PATH=${HOME}/tpotce/data/deploy_sensor.log ansible-playbook ${myANSIBLE_TPOT_PLAYBOOK} -i ${mySENSOR_IP}, -c ssh -u ${mySSHUSER} --ask-become-pass -e "ansible_port=${myANSIBLE_PORT}"
+
+if [ "$?" == 0 ];
+  then
+	# Update the T-Pot .env config and lswebpasswd (avoid the need to restart T-Pot) on the host
+	echo "# Updating SENSOR users on this HIVE and in the T-Pot .env config:"
+    sed -i "/^LS_WEB_USER=/c\LS_WEB_USER=$myENV_LS_WEB_USER" "${myENV_FILE}"
+	: > "${HOME}"/tpotce/data/nginx/conf/lswebpasswd
+	for i in $myENV_LS_WEB_USER;
+	  do
+	    if [[ -n $i ]]; 
+	      then
+	        # Need to control newlines as they kept coming up for some reason
+	        echo -n "$i" | base64 -d -w0
+	        echo
+	        echo -n "$i" | base64 -d -w0 | tr -d '\n' >> ${HOME}/tpotce/data/nginx/conf/lswebpasswd
+	        echo >> ${HOME}/tpotce/data/nginx/conf/lswebpasswd
+	      fi
+	done
+fi
+
+unset myTPOT_HIVE_USER
+unset myTPOT_HIVE_IP

docker-compose.yml

@@ -1,3 +1,4 @@
+# T-Pot: STANDARD
 version: '3.9'
 
 networks:
@@ -21,23 +22,24 @@ networks:
   sentrypeer_local:
   tanner_local:
   spiderfoot_local:
+  wordpot_local:
   ewsposter_local:
 
 services:
 
-##############################################
+#########################################
 #### DEV
-##############################################
+#########################################
-#### T-Pot Light Init - Never delete this!
+#### T-Pot Init - Never delete this!
-##############################################
+#########################################
 
 # T-Pot Init Service
   tpotinit:
     container_name: tpotinit
-    build: docker/.
     env_file:
       - .env
     restart: always
+    stop_grace_period: 60s
     tmpfs:
       - /tmp/etc:uid=2000,gid=2000
       - /tmp/:uid=2000,gid=2000
@@ -50,6 +52,7 @@ services:
       - ${TPOT_DOCKER_COMPOSE}:/tmp/tpot/docker-compose.yml:ro
       - ${TPOT_DATA_PATH}/blackhole:/etc/blackhole
       - ${TPOT_DATA_PATH}:/data
+      - /var/run/docker.sock:/var/run/docker.sock:ro
 
 
 ##################
@@ -109,7 +112,7 @@ services:
     pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
-     - ${TPOT_DATA_PATH}/citrixhoneypot/logs:/opt/citrixhoneypot/logs
+     - ${TPOT_DATA_PATH}/citrixhoneypot/log:/opt/citrixhoneypot/logs
 
 # Conpot IEC104 service
   conpot_IEC104:
@@ -427,6 +430,7 @@ services:
      - mailoney_local
     ports:
      - "25:25"
+     - "587:25"
     image: ${TPOT_REPO}/mailoney:${TPOT_VERSION}
     pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
@@ -474,15 +478,13 @@ services:
     depends_on:
       tpotinit:
         condition: service_healthy
-# SentryPeer offers to exchange bad actor data via DHT / P2P mode by setting the ENV to true (1)
-# In some cases (i.e. internally deployed T-Pots) this might be confusing as SentryPeer will show
-# the bad actors in its logs. Therefore this option is opt-in based.
 #    environment:
-#     - SENTRYPEER_PEER_TO_PEER=0
+#     - SENTRYPEER_PEER_TO_PEER=1
     networks:
      - sentrypeer_local
     ports:
 #     - "4222:4222/udp"
+     - "5060:5060/tcp"
      - "5060:5060/udp"
 #     - "127.0.0.1:8082:8082"
     image: ${TPOT_REPO}/sentrypeer:${TPOT_VERSION}
@@ -572,6 +574,22 @@ services:
     image: ${TPOT_REPO}/snare:${TPOT_VERSION}
     pull_policy: ${TPOT_PULL_POLICY}
 
+# Wordpot service
+  wordpot:
+    container_name: wordpot
+    restart: always
+    depends_on:
+      tpotinit:
+        condition: service_healthy
+    networks:
+     - wordpot_local
+    ports:
+     - "8080:80"
+    image: ${TPOT_REPO}/wordpot:${TPOT_VERSION}
+    read_only: true
+    volumes:
+     - ${TPOT_DATA_PATH}/wordpot/log:/opt/wordpot/logs/
+
 
 ##################
 #### NSM
@@ -616,9 +634,8 @@ services:
       tpotinit:
         condition: service_healthy
     environment:
-    # For ET Pro ruleset replace "OPEN" with your OINKCODE
+     - OINKCODE=${OINKCODE:-OPEN} # Default to OPEN if unset or NULL (value provided by T-Pot .env)
-     - OINKCODE=OPEN
+    # Loading external Rules from URL
-    # Loading externel Rules from URL
     # - FROMURL="https://username:password@yoururl.com|https://username:password@otherurl.com"
     network_mode: "host"
     cap_add:
@@ -686,6 +703,11 @@ services:
         condition: service_healthy
     environment:
      - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
+     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
+     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
+     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
+    ports:
+     - "127.0.0.1:64305:64305"
     mem_limit: 2g
     image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
     pull_policy: ${TPOT_PULL_POLICY}
@@ -730,6 +752,8 @@ services:
         condition: service_healthy
     environment:
      - MAP_COMMAND=DataServer_v2.py
+     - TPOT_ATTACKMAP_TEXT=${TPOT_ATTACKMAP_TEXT}
+     - TZ=${TPOT_ATTACKMAP_TEXT_TIMEZONE}
     stop_signal: SIGKILL
     tty: true
     image: ${TPOT_REPO}/map:${TPOT_VERSION}
@@ -765,7 +789,6 @@ services:
     container_name: nginx
     restart: always
     environment:
-      - COCKPIT=${COCKPIT}
       - TPOT_OSTYPE=${TPOT_OSTYPE}
     depends_on:
       tpotinit:
@@ -781,13 +804,13 @@ services:
     network_mode: "host"
     ports:
      - "64297:64297"
-     - "127.0.0.1:64304:64304"
     image: ${TPOT_REPO}/nginx:${TPOT_VERSION}
     pull_policy: ${TPOT_PULL_POLICY}
     read_only: true
     volumes:
      - ${TPOT_DATA_PATH}/nginx/cert/:/etc/nginx/cert/:ro
      - ${TPOT_DATA_PATH}/nginx/conf/nginxpasswd:/etc/nginx/nginxpasswd:ro
+     - ${TPOT_DATA_PATH}/nginx/conf/lswebpasswd:/etc/nginx/lswebpasswd:ro
      - ${TPOT_DATA_PATH}/nginx/log/:/var/log/nginx/
 
 # Spiderfoot service

docker/adbhoney/Dockerfile

@@ -1,4 +1,4 @@
-FROM alpine:3.17
+FROM alpine:3.19
 #
 # Include dist
 COPY dist/ /root/dist/
@@ -7,6 +7,7 @@ COPY dist/ /root/dist/
 RUN apk --no-cache -U add \
 		git \
 		procps \
+		py3-psutil \
 		py3-requests \
 		python3 && \
 #
@@ -16,6 +17,7 @@ RUN apk --no-cache -U add \
 #    git checkout 2417a7a982f4fd527b3a048048df9a23178767ad && \
     git checkout 42afd98611724ca3d694a48b694c957e8d953db4 && \
     cp /root/dist/adbhoney.cfg /opt/adbhoney && \
+    cp /root/dist/cpu_check.py / && \
     sed -i 's/dst_ip/dest_ip/' /opt/adbhoney/adbhoney/core.py && \
     sed -i 's/dst_port/dest_port/' /opt/adbhoney/adbhoney/core.py && \
 #
@@ -30,8 +32,8 @@ RUN apk --no-cache -U add \
 #
 # Set workdir and start adbhoney
 STOPSIGNAL SIGINT
-# Adbhoney sometimes hangs at 100% CPU usage, if detected process will be killed and container restarts per docker-compose settings
+# Adbhoney sometimes hangs at 100% CPU usage, if detected container will become unhealthy and restarted by tpotinit
-HEALTHCHECK CMD if [ $(ps -C mpv -p 1 -o %cpu | tail -n 1 | cut -f 1 -d ".") -gt 75 ]; then kill -2 1; else exit 0; fi
+HEALTHCHECK --interval=5m --timeout=30s --retries=3 CMD python3 /cpu_check.py $(pgrep -of run.py) 99
 USER adbhoney:adbhoney
 WORKDIR /opt/adbhoney/
 CMD /usr/bin/python3 run.py

docker/adbhoney/dist/cpu_check.py

@@ -0,0 +1,42 @@
+import psutil
+import sys
+import time
+
+if len(sys.argv) != 3:
+    print("Usage: cpu_check.py <PID> <CPU_USAGE_THRESHOLD>")
+    sys.exit(1)
+
+try:
+    pid = int(sys.argv[1])
+except ValueError:
+    print("Please provide a valid integer value for the PID.")
+    sys.exit(1)
+
+try:
+    cpu_threshold = float(sys.argv[2])
+except ValueError:
+    print("Please provide a valid number for the CPU usage threshold.")
+    sys.exit(1)
+
+try:
+    target_process = psutil.Process(pid)
+except psutil.NoSuchProcess:
+    print(f"No process with the PID {pid} was found.")
+    sys.exit(1)
+
+# Prepare to calculate the average CPU usage over 3 intervals of 1 second each
+cpu_usages = []
+for _ in range(3):
+    cpu_usages.append(target_process.cpu_percent(interval=1))
+
+# Calculate the average CPU usage
+average_cpu_usage = sum(cpu_usages) / len(cpu_usages)
+print(f"Average CPU Usage of PID {pid} over 3 seconds: {average_cpu_usage}%")
+
+# Check average CPU usage against the threshold
+if average_cpu_usage >= cpu_threshold:
+    print(f"Average CPU usage of PID {pid} is above or equal to the threshold of {cpu_threshold}%.")
+    sys.exit(1)
+else:
+    print(f"Average CPU usage of PID {pid} is below the threshold of {cpu_threshold}%. Exiting with code 0.")
+    sys.exit(0)

docker/adbhoney/docker-compose.yml

@@ -16,8 +16,8 @@ services:
      - adbhoney_local
     ports:
      - "5555:5555"
-    image: "dtagdevsec/adbhoney:2204"
+    image: "dtagdevsec/adbhoney:24.04"
     read_only: true
     volumes:
-     - /data/adbhoney/log:/opt/adbhoney/log
+     - $HOME/tpotce/data/adbhoney/log:/opt/adbhoney/log
-     - /data/adbhoney/downloads:/opt/adbhoney/dl
+     - $HOME/tpotce/data/adbhoney/downloads:/opt/adbhoney/dl

docker/builder.sh

@@ -1,10 +1,13 @@
 #!/bin/bash
 
+# Buildx Example: docker buildx build --platform linux/amd64,linux/arm64 -t username/demo:latest --push .
+
 # Setup Vars
 myPLATFORMS="linux/amd64,linux/arm64"
-myHUBORG="dtagdevsec"
+myHUBORG_DOCKER="dtagdevsec"
-myTAG="2204"
+myHUBORG_GITHUB="ghcr.io/telekom-security"
-myIMAGESBASE="adbhoney ciscoasa citrixhoneypot conpot cowrie ddospot dicompot dionaea elasticpot endlessh ewsposter fatt glutton hellpot heralding honeypots honeytrap ipphoney log4pot mailoney medpot nginx p0f redishoneypot sentrypeer spiderfoot suricata wordpot"
+myTAG="24.04"
+myIMAGESBASE="tpotinit adbhoney ciscoasa citrixhoneypot conpot cowrie ddospot dicompot dionaea elasticpot endlessh ewsposter fatt glutton hellpot heralding honeypots honeytrap ipphoney log4pot mailoney medpot nginx p0f redishoneypot sentrypeer spiderfoot suricata wordpot"
 myIMAGESELK="elasticsearch kibana logstash map"
 myIMAGESTANNER="phpox redis snare tanner"
 myBUILDERLOG="builder.log"
@@ -23,9 +26,42 @@ fi
 docker buildx > /dev/null 2>&1 
 if [ "$?" == "1" ];
   then
-    echo "### Build environment not setup. Run bin/setup_builder.sh"
+    echo "### Build environment not setup. Install docker engine from docker:"
+    echo "### https://docs.docker.com/engine/install/debian/"
 fi
 
+# Let's ensure arm64 and amd64 are supported
+echo "### Let's ensure ARM64 and AMD64 are supported ..."
+myARCHITECTURES="amd64 arm64"
+mySUPPORTED=$(docker buildx inspect --bootstrap)
+
+for i in $myARCHITECTURES;
+  do
+    if ! echo $mySUPPORTED | grep -q linux/$i;
+      then
+        echo "## Installing $i support ..."
+        docker run --privileged --rm tonistiigi/binfmt --install $i
+        docker buildx inspect --bootstrap
+      else
+        echo "## $i support detected!"
+    fi
+  done
+echo
+
+# Let's ensure we have builder created with cache support
+echo "### Checking for mybuilder ..."
+if ! docker buildx ls | grep -q mybuilder;
+  then
+    echo "## Setting up mybuilder ..."
+    docker buildx create --name mybuilder
+    # Set as default, otherwise local cache is not supported
+    docker buildx use mybuilder
+    docker buildx inspect --bootstrap
+  else
+    echo "## Found mybuilder!"
+fi
+echo
+
 # Only run with command switch
 if [ "$1" == "" ]; then
   echo "### T-Pot Multi Arch Image Builder."
@@ -44,7 +80,12 @@ local myPUSHOPTION="$3"
 for myREPONAME in $myIMAGELIST;
   do
     echo -n "Now building: $myREPONAME in $myPATH$myREPONAME/."
-    docker buildx build --cache-from "type=local,src=$myBUILDCACHE" --cache-to "type=local,dest=$myBUILDCACHE" --platform $myPLATFORMS -t $myHUBORG/$myREPONAME:$myTAG $myPUSHOPTION $myPATH$myREPONAME/. >> $myBUILDERLOG 2>&1
+    docker buildx build --cache-from "type=local,src=$myBUILDCACHE" \
+                        --cache-to "type=local,dest=$myBUILDCACHE" \
+                        --platform $myPLATFORMS \
+                        -t $myHUBORG_DOCKER/$myREPONAME:$myTAG \
+                        -t $myHUBORG_GITHUB/$myREPONAME:$myTAG \
+                        $myPUSHOPTION $myPATH$myREPONAME/. >> $myBUILDERLOG 2>&1
     if [ "$?" != "0" ];
       then
 	echo " [ ERROR ] - Check logs!"
@@ -76,4 +117,3 @@ if [ "$1" == "push" ];
     fuBUILDIMAGES "elk/" "$myIMAGESELK" "--push"
     fuBUILDIMAGES "tanner/" "$myIMAGESTANNER" "--push"
 fi
-

docker/ciscoasa/Dockerfile

@@ -1,4 +1,4 @@
-FROM alpine:3.17
+FROM alpine:3.19
 #
 # Include dist
 COPY dist/ /root/dist/
@@ -27,7 +27,7 @@ RUN apk --no-cache -U upgrade && \
     cd ciscoasa_honeypot && \
     git checkout d6e91f1aab7fe6fc01fabf2046e76b68dd6dc9e2 && \
     sed -i "s/git+git/git+https/g" requirements.txt && \
-    pip3 install --no-cache-dir -r requirements.txt && \
+    pip3 install --break-system-packages --no-cache-dir -r requirements.txt && \
     cp /root/dist/asa_server.py /opt/ciscoasa_honeypot && \
     chown -R ciscoasa:ciscoasa /opt/ciscoasa_honeypot && \
 #

docker/ciscoasa/docker-compose.yml

@@ -19,7 +19,7 @@ services:
     ports:
      - "5000:5000/udp"
      - "8443:8443"
-    image: "dtagdevsec/ciscoasa:2204"
+    image: "dtagdevsec/ciscoasa:24.04"
     read_only: true
     volumes:
-     - /data/ciscoasa/log:/var/log/ciscoasa
+     - $HOME/tpotce/data/ciscoasa/log:/var/log/ciscoasa

docker/citrixhoneypot/Dockerfile

@@ -1,4 +1,4 @@
-FROM alpine:3.17
+FROM alpine:3.19
 #
 # Install packages
 RUN apk --no-cache -U add \
@@ -8,7 +8,7 @@ RUN apk --no-cache -U add \
 		py3-pip \
 		python3 && \
 #
-    pip3 install --no-cache-dir python-json-logger && \
+    pip3 install --break-system-packages --no-cache-dir python-json-logger && \
 #
 # Install CitrixHoneypot from GitHub
     git clone https://github.com/t3chn0m4g3/CitrixHoneypot /opt/citrixhoneypot && \
@@ -28,7 +28,7 @@ RUN apk --no-cache -U add \
     addgroup -g 2000 citrixhoneypot && \
     adduser -S -H -s /bin/ash -u 2000 -D -g 2000 citrixhoneypot && \
     chown -R citrixhoneypot:citrixhoneypot /opt/citrixhoneypot && \
-    setcap cap_net_bind_service=+ep /usr/bin/python3.10 && \
+    setcap cap_net_bind_service=+ep $(readlink -f $(type -P python3)) && \
 #
 # Clean up
     apk del --purge git \

docker/citrixhoneypot/docker-compose.yml

@@ -16,7 +16,7 @@ services:
      - citrixhoneypot_local
     ports:
      - "443:443"
-    image: "dtagdevsec/citrixhoneypot:2204"
+    image: "dtagdevsec/citrixhoneypot:24.04"
     read_only: true
     volumes:
-     - /data/citrixhoneypot/logs:/opt/citrixhoneypot/logs
+     - $HOME/tpotce/data/citrixhoneypot/log:/opt/citrixhoneypot/logs

docker/conpot/Dockerfile

@@ -1,4 +1,4 @@
-FROM alpine:3.17
+FROM alpine:3.19
 #
 # Include dist
 COPY dist/ /root/dist/
@@ -43,10 +43,14 @@ RUN apk --no-cache -U add \
 			wget && \
 #
 # Setup ConPot
+    git clone https://github.com/t3chn0m4g3/cpppo /opt/cpppo && \
+    cd /opt/cpppo && \
+    pip3 install --break-system-packages --no-cache-dir --upgrade pip && \
+    pip3 install --break-system-packages --no-cache-dir . && \
     git clone https://github.com/mushorg/conpot /opt/conpot && \
     cd /opt/conpot/ && \
-    git checkout b3740505fd26d82473c0d7be405b372fa0f82575 && \
+	git checkout 26c67d11b08a855a28e87abd186d959741f46c7f && \
-    #git checkout 1c2382ea290b611fdc6a0a5f9572c7504bcb616e && \
+    # git checkout b3740505fd26d82473c0d7be405b372fa0f82575 && \
     # Change template default ports if <1024
     sed -i 's/port="2121"/port="21"/' /opt/conpot/conpot/templates/default/ftp/ftp.xml && \
     sed -i 's/port="8800"/port="80"/' /opt/conpot/conpot/templates/default/http/http.xml && \
@@ -58,17 +62,17 @@ RUN apk --no-cache -U add \
     sed -i 's/port="16100"/port="161"/' /opt/conpot/conpot/templates/IEC104/snmp/snmp.xml && \
     sed -i 's/port="6230"/port="623"/' /opt/conpot/conpot/templates/ipmi/ipmi/ipmi.xml && \
     cp /root/dist/requirements.txt . && \
-    pip3 install --no-cache-dir --upgrade pip && \
+    pip3 install --break-system-packages --no-cache-dir . && \
-    pip3 install --no-cache-dir . && \
     cd / && \
     rm -rf /opt/conpot /tmp/* /var/tmp/* && \
-    setcap cap_net_bind_service=+ep /usr/bin/python3.10 && \
+    setcap cap_net_bind_service=+ep $(readlink -f $(type -P python3)) && \
 #
 # Get wireshark manuf db for scapy, setup configs, user, groups
     mkdir -p /etc/conpot /var/log/conpot /usr/share/wireshark && \
-    wget https://github.com/wireshark/wireshark/raw/master/manuf -o /usr/share/wireshark/manuf && \
+    wget https://www.wireshark.org/download/automated/data/manuf -o /usr/share/wireshark/manuf && \
     cp /root/dist/conpot.cfg /etc/conpot/conpot.cfg && \
-    cp -R /root/dist/templates /usr/lib/python3.10/site-packages/conpot/ && \
+    cp -R /root/dist/templates /usr/lib/$(readlink -f $(type -P python3) | cut -f4 -d"/")/site-packages/conpot/ && \
+    cp /root/dist/cpu_check.py / && \
     addgroup -g 2000 conpot && \
     adduser -S -s /bin/ash -u 2000 -D -g 2000 conpot && \
 #
@@ -90,7 +94,7 @@ RUN apk --no-cache -U add \
 #
 # Start conpot
 STOPSIGNAL SIGINT
-# Conpot sometimes hangs at 100% CPU usage, if detected process will be killed and container restarts per docker-compose settings
+# Conpot sometimes hangs at 100% CPU usage, if detected container will become unhealthy and restarted by tpotinit
-HEALTHCHECK CMD if [ $(ps -C mpv -p 1 -o %cpu | tail -n 1 | cut -f 1 -d ".") -gt 75 ]; then kill -2 1; else exit 0; fi
+HEALTHCHECK --interval=5m --timeout=30s --retries=3 CMD python3 /cpu_check.py $(pgrep -of conpot) 99
 USER conpot:conpot
 CMD exec /usr/bin/conpot --mibcache $CONPOT_TMP --temp_dir $CONPOT_TMP --template $CONPOT_TEMPLATE --logfile $CONPOT_LOG --config $CONPOT_CONFIG

docker/conpot/dist/conpot.cfg

@@ -3,7 +3,7 @@ sensorid = conpot
 
 [virtual_file_system]
 data_fs_url = %(CONPOT_TMP)s
-fs_url = tar:///usr/lib/python3.10/site-packages/conpot/data.tar
+fs_url = tar:///usr/lib/python3.11/site-packages/conpot/data.tar
 
 [session]
 timeout = 30

docker/conpot/dist/cpu_check.py

@@ -0,0 +1,42 @@
+import psutil
+import sys
+import time
+
+if len(sys.argv) != 3:
+    print("Usage: cpu_check.py <PID> <CPU_USAGE_THRESHOLD>")
+    sys.exit(1)
+
+try:
+    pid = int(sys.argv[1])
+except ValueError:
+    print("Please provide a valid integer value for the PID.")
+    sys.exit(1)
+
+try:
+    cpu_threshold = float(sys.argv[2])
+except ValueError:
+    print("Please provide a valid number for the CPU usage threshold.")
+    sys.exit(1)
+
+try:
+    target_process = psutil.Process(pid)
+except psutil.NoSuchProcess:
+    print(f"No process with the PID {pid} was found.")
+    sys.exit(1)
+
+# Prepare to calculate the average CPU usage over 3 intervals of 1 second each
+cpu_usages = []
+for _ in range(3):
+    cpu_usages.append(target_process.cpu_percent(interval=1))
+
+# Calculate the average CPU usage
+average_cpu_usage = sum(cpu_usages) / len(cpu_usages)
+print(f"Average CPU Usage of PID {pid} over 3 seconds: {average_cpu_usage}%")
+
+# Check average CPU usage against the threshold
+if average_cpu_usage >= cpu_threshold:
+    print(f"Average CPU usage of PID {pid} is above or equal to the threshold of {cpu_threshold}%.")
+    sys.exit(1)
+else:
+    print(f"Average CPU usage of PID {pid} is below the threshold of {cpu_threshold}%. Exiting with code 0.")
+    sys.exit(0)

docker/conpot/dist/requirements.txt

@@ -12,9 +12,7 @@ bacpypes==0.17.0
 pyghmi==1.4.1
 mixbox
 modbus-tk
-cpppo
 fs==2.3.0
 tftpy
 # some freezegun versions broken
-pycrypto
 sphinx_rtd_theme

docker/conpot/docker-compose.yml

@@ -37,10 +37,10 @@ services:
      - "2121:21"
      - "44818:44818"
      - "47808:47808/udp"
-    image: "dtagdevsec/conpot:2204"
+    image: "dtagdevsec/conpot:24.04"
     read_only: true
     volumes:
-     - /data/conpot/log:/var/log/conpot
+     - $HOME/tpotce/data/conpot/log:/var/log/conpot
 
 # Conpot IEC104 service
   conpot_IEC104:
@@ -61,10 +61,10 @@ services:
     ports:
 #     - "161:161/udp"
      - "2404:2404"
-    image: "dtagdevsec/conpot:2204"
+    image: "dtagdevsec/conpot:24.04"
     read_only: true
     volumes:
-     - /data/conpot/log:/var/log/conpot
+     - $HOME/tpotce/data/conpot/log:/var/log/conpot
 
 # Conpot guardian_ast service
   conpot_guardian_ast:
@@ -84,10 +84,10 @@ services:
      - conpot_local_guardian_ast
     ports:
      - "10001:10001"
-    image: "dtagdevsec/conpot:2204"
+    image: "dtagdevsec/conpot:24.04"
     read_only: true
     volumes:
-     - /data/conpot/log:/var/log/conpot
+     - $HOME/tpotce/data/conpot/log:/var/log/conpot
 
 # Conpot ipmi
   conpot_ipmi:
@@ -107,10 +107,10 @@ services:
      - conpot_local_ipmi
     ports:
      - "623:623/udp"
-    image: "dtagdevsec/conpot:2204"
+    image: "dtagdevsec/conpot:24.04"
     read_only: true
     volumes:
-     - /data/conpot/log:/var/log/conpot
+     - $HOME/tpotce/data/conpot/log:/var/log/conpot
 
 # Conpot kamstrup_382
   conpot_kamstrup_382:
@@ -131,7 +131,7 @@ services:
     ports:
      - "1025:1025"
      - "50100:50100"
-    image: "dtagdevsec/conpot:2204"
+    image: "dtagdevsec/conpot:24.04"
     read_only: true
     volumes:
-     - /data/conpot/log:/var/log/conpot
+     - $HOME/tpotce/data/conpot/log:/var/log/conpot

docker/cowrie/Dockerfile

@@ -1,4 +1,4 @@
-FROM alpine:3.17
+FROM alpine:3.19
 #
 # Include dist
 COPY dist/ /root/dist/
@@ -40,20 +40,20 @@ RUN apk --no-cache -U add \
 # Install cowrie
     mkdir -p /home/cowrie && \
     cd /home/cowrie && \
-    git clone --depth=1 https://github.com/cowrie/cowrie -b v2.5.0 && \
+    # git clone --depth=1 https://github.com/cowrie/cowrie -b v2.5.0 && \
-    #git clone --depth=1 https://github.com/cowrie/cowrie && \
+    git clone https://github.com/cowrie/cowrie && \
     cd cowrie && \
-    #git checkout 8b1e1cf4db0d3b0e70b470cf40385bbbd3ed1733 && \
+    git checkout 3394082040c02d91e79efa2c640ad68da9fe2231 && \
     mkdir -p log && \
     cp /root/dist/requirements.txt . && \
-    pip3 install --upgrade pip && \
+    pip3 install --break-system-packages --upgrade pip && \
-    pip3 install -r requirements.txt && \
+    pip3 install --break-system-packages -r requirements.txt && \
 #
 # Setup configs
-    export PYTHON_DIR=$(python3 --version | tr '[A-Z]' '[a-z]' | tr -d ' ' | cut -d '.' -f 1,2 ) && \
+    #export PYTHON_DIR=$(python3 --version | tr '[A-Z]' '[a-z]' | tr -d ' ' | cut -d '.' -f 1,2 ) && \
-    setcap cap_net_bind_service=+ep /usr/bin/$PYTHON_DIR && \
+    setcap cap_net_bind_service=+ep $(readlink -f $(type -P python3)) && \
     cp /root/dist/cowrie.cfg /home/cowrie/cowrie/cowrie.cfg && \
-    chown cowrie:cowrie -R /home/cowrie/* /usr/lib/$PYTHON_DIR/site-packages/twisted/plugins && \
+    chown cowrie:cowrie -R /home/cowrie/* /usr/lib/$(readlink -f $(type -P python3) | cut -f4 -d"/")/site-packages/twisted/plugins && \
 #
 # Start Cowrie once to prevent dropin.cache errors upon container start caused by read-only filesystem
     su - cowrie -c "export PYTHONPATH=/home/cowrie/cowrie:/home/cowrie/cowrie/src && \

docker/cowrie/docker-compose.yml

@@ -20,10 +20,10 @@ services:
     ports:
      - "22:22"
      - "23:23"
-    image: "dtagdevsec/cowrie:2204"
+    image: "dtagdevsec/cowrie:24.04"
     read_only: true
     volumes:
-     - /data/cowrie/downloads:/home/cowrie/cowrie/dl
+     - $HOME/tpotce/data/cowrie/downloads:/home/cowrie/cowrie/dl
-     - /data/cowrie/keys:/home/cowrie/cowrie/etc
+     - $HOME/tpotce/data/cowrie/keys:/home/cowrie/cowrie/etc
-     - /data/cowrie/log:/home/cowrie/cowrie/log
+     - $HOME/tpotce/data/cowrie/log:/home/cowrie/cowrie/log
-     - /data/cowrie/log/tty:/home/cowrie/cowrie/log/tty
+     - $HOME/tpotce/data/cowrie/log/tty:/home/cowrie/cowrie/log/tty

docker/ddospot/Dockerfile

@@ -1,4 +1,4 @@
-FROM alpine:3.17
+FROM alpine:3.19
 #
 # Include dist
 COPY dist/ /root/dist/
@@ -40,8 +40,8 @@ RUN apk --no-cache -U add \
     sed -i "s#rotate_size = 10#rotate_size = 9999#g" /opt/ddospot/ddospot/pots/ntp/ntpot.conf && \
     sed -i "s#rotate_size = 10#rotate_size = 9999#g" /opt/ddospot/ddospot/pots/ssdp/ssdpot.conf && \
     cp /root/dist/requirements.txt . && \
-    pip3 install -r ddospot/requirements.txt && \
+    pip3 install --break-system-packages -r ddospot/requirements.txt && \
-    setcap cap_net_bind_service=+ep /usr/bin/python3.10 && \
+    setcap cap_net_bind_service=+ep $(readlink -f $(type -P python3)) && \
 #
 # Setup user, groups and configs
     addgroup -g 2000 ddospot && \

docker/ddospot/docker-compose.yml

@@ -20,9 +20,9 @@ services:
      - "123:123/udp"
 #     - "161:161/udp"
      - "1900:1900/udp"
-    image: "dtagdevsec/ddospot:2204"
+    image: "dtagdevsec/ddospot:24.04"
     read_only: true
     volumes:
-     - /data/ddospot/log:/opt/ddospot/ddospot/logs
+     - $HOME/tpotce/data/ddospot/log:/opt/ddospot/ddospot/logs
-     - /data/ddospot/bl:/opt/ddospot/ddospot/bl
+     - $HOME/tpotce/data/ddospot/bl:/opt/ddospot/ddospot/bl
-     - /data/ddospot/db:/opt/ddospot/ddospot/db
+     - $HOME/tpotce/data/ddospot/db:/opt/ddospot/ddospot/db

docker/deprecated/cyberchef/docker-compose.yml

@@ -14,5 +14,5 @@ services:
      - cyberchef_local
     ports:
      - "127.0.0.1:64299:8000"
-    image: "dtagdevsec/cyberchef:2204"
+    image: "dtagdevsec/cyberchef:24.04"
     read_only: true

docker/deprecated/head/docker-compose.yml

@@ -12,5 +12,5 @@ services:
     #        condition: service_healthy
     ports:
      - "127.0.0.1:64302:9100"
-    image: "dtagdevsec/head:2204"
+    image: "dtagdevsec/head:24.04"
     read_only: true