T-Pot is the all in one, optionally distributed, multiarch (amd64, arm64) honeypot plattform, supporting 20+ honeypots and countless visualization options using the Elastic Stack, animated live attack maps and lots of security tools to further improve the deception experience.
T-Pot is based on the Debian 11 (Bullseye) Netinstaller and utilizes
[docker](https://www.docker.com/) and [docker-compose](https://docs.docker.com/compose/) to reach its goal of running as many tools as possible simultaneously and thus utilizing the host's hardware to its maximum.
1. Meet the [system requirements](#requirements). The T-Pot installation needs at least 8-16 GB RAM and 128 GB free disk space as well as a working (outgoing non-filtered) internet connection.
2. Download the T-Pot ISO from [GitHub](https://github.com/telekom-security/tpotce/releases) acording to your architecture (amd64, arm64) or [create it yourself](#createiso).
- For fast help research the [Issues](https://github.com/telekom-security/tpotce/issues) and [Discussions](https://github.com/telekom-security/tpotce/discussions).
- The software is designed and offered with best effort in mind. As a community and open source project it uses lots of other open source software and may contain bugs and issues. Report responsibly.
- By default, your data is submitted to [SecurityMeter](https://www.sicherheitstacho.eu/start/main). You can disable this in the config (`/opt/tpot/etc/tpot.yml`) by remove the ewsposter section. But in this case sharing really is caring!
T-Pot is based on the Debian Netinstaller and utilizes
[docker](https://www.docker.com/) and [docker-compose](https://docs.docker.com/compose/) to reach its goal of running as many tools simultaneously as possible and thus utilizing the host's hardware to its maximum.
* [Fatt](https://github.com/0x4D31/fatt) a pyshark based script for extracting network metadata and fingerprints from pcap files and live network traffic.
* [Geoip-Attack-Map](https://github.com/eddie4/geoip-attack-map) a beautifully animated attack map [optimized](https://github.com/t3chn0m4g3/geoip-attack-map) for T-Pot.
The source code and configuration files are fully stored in the T-Pot GitHub repository. The docker images are built and preconfigured for the T-Pot environment.
During the installation and during the usage of T-Pot there are two different types of accounts you will be working with. Make sure you know the differences of the different account types, since it is **by far** the most common reason for authentication errors and `fail2ban` lockouts.
| Service | Account | Username | Description |
| :--- | :--- | :--- | :--- |
| SSH, Cockpit | OS | `tsec` | On ISO based installations the user `tsec` is predefined. |
| SSH, Cockpit | OS | `<os_username>` | Any other installation, the `<username>` you chose during installation. |
| Nginx | BasicAuth | `<web_user>` | `<web_user>` you chose during the installation of T-Pot. |
| CyberChef | BasicAuth | `<web_user>` | `<web_user>` you chose during the installation of T-Pot. |
| Elasticvue | BasicAuth | `<web_user>` | `<web_user>` you chose during the installation of T-Pot. |
| Geoip Attack Map | BasicAuth | `<web_user>` | `<web_user>` you chose during the installation of T-Pot. |
| Spiderfoot | BasicAuth | `<web_user>` | `<web_user>` you chose during the installation of T-Pot. |
Depending on the installation setup, edition, installing on [real hardware](#running-on-hardware), in a [virtual machine](#running-in-a-vm) or [cloud](#running-in-a-cloud) there are different kind of requirements to be met regarding OS, RAM, storage and network for a successful installation of T-Pot (you can always adjust `/opt/tpot/etc/tpot.yml` to your needs to overcome these requirements).
While Intel versions run stable, Apple Silicon (arm64) support for Debian has known issues which in UTM may require switching `Display` to `Console Only` during initial installation of T-Pot / Debian and afterwards back to `Full Graphics`.
Since the number of possible hardware combinations is too high to make general recommendations. If you are unsure, you should test the hardware with the T-Pot ISO image or use the post install method.
Some users report working installations on other clouds and hosters, i.e. Azure and GCP. Hardware requirements may be different. If you are unsure you should research [issues](https://github.com/telekom-security/tpotce/issues) and [discussions](https://github.com/telekom-security/tpotce/discussions) and run some functional tests. Cloud support is a community developed feature and hyperscalers are known to adjust linux images, so expect some necessary adjustments on your end.
Besides the ports generally needed by the OS, i.e. obtaining a DHCP lease, DNS, etc. T-Pot will require the following ports for incomding / outgoing connections. Review the [T-Pot Architecure](#technical-architecture) for a visual representation. Also some ports will show up as duplicates, which is fine since used in different editions.
Ports and availability of SaaS services may vary based on your geographical location. Also during first install outgoing ICMP / TRACEROUTE is required additionally to find the closest and fastest mirror to you.
It is recommended to get yourself familiar how T-Pot and it honeypots work before you start exposing it towards the interet. For a quickstart run a T-Pot installation in a virtual machine.
<br><br>
Once you are familiar how things work you should choose a network you suspect intruders in / from (i.e. the internet). Otherwise T-Pot will most likely not capture any attacks, other than the ones from your internal network! For starters it is recommended to put T-Pot in an unfiltered zone, where all TCP and UDP traffic is forwarded to T-Pot's network interface. However to avoid fingerprinting you can put T-Pot behind a firewall and forward all TCP / UDP traffic in the port range of 1-64000 to T-Pot while allowing access to ports > 64000 only from trusted IPs or only expose the [ports](#required-ports) you want. However if you wish to catch malware traffic on unknown ports you should not limit the ports you forward since glutton & honeytrap dynamically bind any TCP port that is not covered by the other honeypot daemons and thus give you a better representation what risks you are exposed to.
The installation of T-Pot is straight forward and heavily depends on a working, transparent and non-proxied up and running internet connection. Otherwise the installation **will fail!**
Firstly, decide if you want to download the prebuilt installation ISO image from [GitHub](https://github.com/telekom-security/tpotce/releases), [create it yourself](#createiso) ***or*** [post-install on an existing Debian 10 (Buster)](#postinstall).
An installation ISO image is available for download (~50MB), which is created by the [ISO Creator](https://github.com/telekom-security/tpotce) you can use yourself in order to create your own image. It will basically just save you some time downloading components and creating the ISO image.
You can download the prebuilt installation ISO from [GitHub](https://github.com/telekom-security/tpotce/releases) and jump to the [installation](#vm) section.
For transparency reasons and to give you the ability to customize your install you use the [ISO Creator](https://github.com/telekom-security/tpotce) that enables you to create your own ISO installation image.
The script will download and install dependencies necessary to build the image on the invoking machine. It will further download the ubuntu network installer image (~50MB) which T-Pot is based on.
T-Pot is successfully tested with [VirtualBox](https://www.virtualbox.org) and [VMWare](http://www.vmware.com) with just little modifications to the default machine configurations.
It is important to make sure you meet the [system requirements](#requirements) and assign virtual harddisk and RAM according to the requirements while making sure networking is bridged.
You need to enable promiscuous mode for the network interface for fatt, suricata and p0f to work properly. Make sure you enable it during configuration.
If you want to use a wifi card as a primary NIC for T-Pot, please be aware that not all network interface drivers support all wireless cards. In VirtualBox e.g. you have to choose the *"MT SERVER"* model of the NIC.
Whereas most CD burning tools allow you to burn from ISO images, the procedure to create a bootable USB stick from an ISO image depends on your system. There are various Windows GUI tools available, e.g. [this tip](http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows) might help you.<br> On [Linux](http://askubuntu.com/questions/59551/how-to-burn-a-iso-to-a-usb-device) or [MacOS](http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-mac-osx) you can use the tool *dd* or create the USB stick with T-Pot's [ISO Creator](https://github.com/telekom-security).
*Please note*: Limited tests are performed for the Intel NUC platform other hardware platforms **remain untested**. There is no hardware support provided of any kind.
Important notice: The user / group `tpot` are reserved for T-Pot. The installation will abort if the user `tpot` exists. Make sure to use a different user name when preparing the OS installation for T-Pot.
You can also let the installer run automatically if you provide your own `tpot.conf`. An example is available in `tpotce/iso/installer/tpot.conf.dist`. This should make things easier in case you want to automate the installation i.e. with **Ansible**.
*Please note*: Cloud providers usually offer adjusted Debian OS images, which might not be compatible with T-Pot. There is no cloud provider support provided of any kind.
It first creates all resources (security group, network, subnet, router), deploys one (or more) new servers and then installs and configures T-Pot on them.
You can have a look at the Playbook and easily adapt the deploy role for other [cloud providers](https://docs.ansible.com/ansible/latest/scenario_guides/cloud_guides.html). Check out [Ansible Galaxy](https://galaxy.ansible.com/search?keywords=&order_by=-relevance&page=1&deprecated=false&type=collection&tags=cloud) for more cloud collections.
*Please note*: Cloud providers usually offer adjusted Debian OS images, which might not be compatible with T-Pot. There is no cloud provider support provided of any kind.
This can easily be extended to support other [Terraform providers](https://registry.terraform.io/browse/providers?category=public-cloud%2Ccloud-automation%2Cinfrastructure).
*Please note*: Cloud providers usually offer adjusted Debian OS images, which might not be compatible with T-Pot. There is no cloud provider support provided of any kind.
The installation requires very little interaction, only a locale and keyboard setting have to be answered for the basic linux installation. While the system reboots maintain the active internet connection. The T-Pot installer will start and ask you for an installation type, password for the **tsec** user and credentials for a **web user**. Everything else will be configured automatically. All docker images and other componenents will be downloaded. Depending on your network connection and the chosen installation type, the installation may take some time. With 250Mbit down / 40Mbit up the installation is usually finished within 15-30 minutes.
Once the installation is finished, the system will automatically reboot and you will be presented with the T-Pot login screen. On the console you may login with:
You can login from your browser and access the Admin UI: `https://<your.ip>:64294` or via SSH to access the command line: `ssh -l tsec -p 64295 <your.ip>`
For the ones of you who want to live on the bleeding edge of T-Pot development we introduced an update feature which will allow you to update all T-Pot relevant files to be up to date with the T-Pot master branch.
**If you made any relevant changes to the T-Pot relevant config files make sure to create a backup first.**
**Despite all testing efforts please be reminded that updates sometimes may have unforeseen consequences. Please create a backup of the machine or the files with the most value to your work.**
By default, the SSH daemon allows access on **tcp/64295** with a user / password combination and prevents credential brute forcing attempts using `fail2ban`. This also counts for Admin UI (**tcp/64294**) and Web UI (**tcp/64297**) access.<br>
If you do not have a SSH client at hand and still want to access the machine via command line you can do so by accessing the Admin UI from `https://<your.ip>:64294`, enter
If new versions of the components involved appear new docker images will be created and distributed. New images will be available from docker hub and downloaded automatically to T-Pot and activated accordingly.
T-Pot is provided in order to make it accessible to all interested in honeypots. By default, the captured data is submitted to a community backend. This community backend uses the data to feed [Sicherheitstacho](https://sicherheitstacho.eu).
As an Opt-In it is now possible to also share T-Pot data with 3rd party HPFEEDS brokers.
If you want to share your T-Pot data you simply have to register an account with a 3rd party broker with its own benefits towards the community. You simply run `hpfeeds_optin.sh` which will ask for your credentials. It will automatically update `/opt/tpot/etc/tpot.yml` to deliver events to your desired broker.
We hope you understand that we cannot provide support on an individual basis. We will try to address questions, bugs and problems on our [GitHub issue list](https://github.com/telekom-security/tpotce/issues).
Without open source and the fruitful development community (we are proud to be a part of), T-Pot would not have been possible! Our thanks are extended but not limited to the following people and organizations:
A new version of T-Pot is released about every 6-12 months, development has shifted more and more towards rolling releases and the usage of `/opt/tpot/update.sh`.
***"[...] I highly recommend T-Pot which is ... it's not exactly a swiss army knife .. it's more like a swiss army soldier, equipped with a swiss army knife. Inside a tank. A swiss tank. [...]"***<br>
And from @robcowart (creator of [ElastiFlow](https://github.com/robcowart/elastiflow)):<br>
***"#TPot is one of the most well put together turnkey honeypot solutions. It is a must-have for anyone wanting to analyze and understand the behavior of malicious actors and the threat they pose to your organization."***
