diff --git a/install_zh_cn.sh b/install_zh_cn.sh
index abfa48c1..5907b980 100644
--- a/install_zh_cn.sh
+++ b/install_zh_cn.sh
@@ -36,7 +36,7 @@ arch() {
         armv6* | armv6) echo 'armv6' ;;
         armv5* | armv5) echo 'armv5' ;;
         s390x) echo 's390x' ;;
-        *) echo -e "${green}不支持的 CPU 架构！ ${plain}" && rm -f install.sh && exit 1 ;;
+        *) echo -e "${green}不支持的 CPU 架构！ ${plain}" && rm -f install_zh_cn.sh && exit 1 ;;
     esac
 }
 
@@ -1016,23 +1016,24 @@ install_x-ui() {
 
     echo -e "${green}x-ui ${tag_version}${plain} 安装完成，正在运行..."
     echo -e ""
-    echo -e "╔═══════════════════════════════════════════════════════╗
-║  ${blue}x-ui 控制菜单用法（子命令）:${plain}              ║
+    echo -e "
+╔═══════════════════════════════════════════════════════╗
+║  ${blue}x-ui 控制菜单用法（子命令）:${plain}                         ║
 ║                                                       ║
-║  ${blue}x-ui${plain}              - 管理脚本                     ║
-║  ${blue}x-ui start${plain}        - 启动                         ║
-║  ${blue}x-ui stop${plain}         - 停止                         ║
-║  ${blue}x-ui restart${plain}      - 重启                         ║
-║  ${blue}x-ui status${plain}       - 当前状态                     ║
-║  ${blue}x-ui settings${plain}     - 当前设置                     ║
-║  ${blue}x-ui enable${plain}       - 启用开机自启                 ║
-║  ${blue}x-ui disable${plain}      - 禁用开机自启                 ║
-║  ${blue}x-ui log${plain}          - 查看日志                     ║
-║  ${blue}x-ui banlog${plain}       - 查看 Fail2ban 禁止日志       ║
-║  ${blue}x-ui update${plain}       - 更新                         ║
-║  ${blue}x-ui legacy${plain}       - 旧版本                       ║
-║  ${blue}x-ui install${plain}      - 安装                         ║
-║  ${blue}x-ui uninstall${plain}    - 卸载                         ║
+║  ${blue}x-ui${plain}              - 管理脚本                        ║
+║  ${blue}x-ui start${plain}        - 启动                            ║
+║  ${blue}x-ui stop${plain}         - 停止                            ║
+║  ${blue}x-ui restart${plain}      - 重启                            ║
+║  ${blue}x-ui status${plain}       - 当前状态                        ║
+║  ${blue}x-ui settings${plain}     - 当前设置                        ║
+║  ${blue}x-ui enable${plain}       - 启用开机自启                    ║
+║  ${blue}x-ui disable${plain}      - 禁用开机自启                    ║
+║  ${blue}x-ui log${plain}          - 查看日志                        ║
+║  ${blue}x-ui banlog${plain}       - 查看 Fail2ban 禁止日志          ║
+║  ${blue}x-ui update${plain}       - 更新                            ║
+║  ${blue}x-ui legacy${plain}       - 旧版本                          ║
+║  ${blue}x-ui install${plain}      - 安装                            ║
+║  ${blue}x-ui uninstall${plain}    - 卸载                            ║
 ╚═══════════════════════════════════════════════════════╝"
 }
 
diff --git a/update_zh_cn.sh b/update_zh_cn.sh
new file mode 100644
index 00000000..d9f11a4b
--- /dev/null
+++ b/update_zh_cn.sh
@@ -0,0 +1,991 @@
+#!/bin/bash
+
+red='\033[0;31m'
+green='\033[0;32m'
+blue='\033[0;34m'
+yellow='\033[0;33m'
+plain='\033[0m'
+
+xui_folder="${XUI_MAIN_FOLDER:=/usr/local/x-ui}"
+xui_service="${XUI_SERVICE:=/etc/systemd/system}"
+
+# 不要编辑此配置
+b_source="${BASH_SOURCE[0]}"
+while [ -h "$b_source" ]; do
+    b_dir="$(cd -P "$(dirname "$b_source")" > /dev/null 2>&1 && pwd || pwd -P)"
+    b_source="$(readlink "$b_source")"
+    [[ $b_source != /* ]] && b_source="$b_dir/$b_source"
+done
+cur_dir="$(cd -P "$(dirname "$b_source")" > /dev/null 2>&1 && pwd || pwd -P)"
+script_name=$(basename "$0")
+
+# 检查命令是否存在函数
+_command_exists() {
+    type "$1" &> /dev/null
+}
+
+# 失败、记录并退出脚本函数
+_fail() {
+    local msg=${1}
+    echo -e "${red}${msg}${plain}"
+    exit 2
+}
+
+# 检查 root 权限
+[[ $EUID -ne 0 ]] && _fail "致命错误：请以 root 权限运行此脚本。"
+
+if _command_exists curl; then
+    curl_bin=$(which curl)
+else
+    _fail "错误：未找到命令 'curl'。"
+fi
+
+# 检查操作系统并设置 release 变量
+if [[ -f /etc/os-release ]]; then
+    source /etc/os-release
+    release=$ID
+elif [[ -f /usr/lib/os-release ]]; then
+    source /usr/lib/os-release
+    release=$ID
+else
+    _fail "无法检查系统操作系统，请联系作者！"
+fi
+echo "操作系统版本为：$release"
+
+arch() {
+    case "$(uname -m)" in
+        x86_64 | x64 | amd64) echo 'amd64' ;;
+        i*86 | x86) echo '386' ;;
+        armv8* | armv8 | arm64 | aarch64) echo 'arm64' ;;
+        armv7* | armv7 | arm) echo 'armv7' ;;
+        armv6* | armv6) echo 'armv6' ;;
+        armv5* | armv5) echo 'armv5' ;;
+        s390x) echo 's390x' ;;
+        *) echo -e "${red}不支持的 CPU 架构！${plain}" && rm -f "${cur_dir}/${script_name}" > /dev/null 2>&1 && exit 2 ;;
+    esac
+}
+
+echo "架构：$(arch)"
+
+# 简单辅助函数
+is_ipv4() {
+    [[ "$1" =~ ^([0-9]{1,3}\.){3}[0-9]{1,3}$ ]] && return 0 || return 1
+}
+is_ipv6() {
+    [[ "$1" =~ : ]] && return 0 || return 1
+}
+is_ip() {
+    is_ipv4 "$1" || is_ipv6 "$1"
+}
+is_domain() {
+    [[ "$1" =~ ^([A-Za-z0-9](-*[A-Za-z0-9])*\.)+(xn--[a-z0-9]{2,}|[A-Za-z]{2,})$ ]] && return 0 || return 1
+}
+
+# 端口辅助函数
+is_port_in_use() {
+    local port="$1"
+    if command -v ss > /dev/null 2>&1; then
+        ss -ltn 2> /dev/null | awk -v p=":${port}$" '$4 ~ p {exit 0} END {exit 1}'
+        return
+    fi
+    if command -v netstat > /dev/null 2>&1; then
+        netstat -lnt 2> /dev/null | awk -v p=":${port} " '$4 ~ p {exit 0} END {exit 1}'
+        return
+    fi
+    if command -v lsof > /dev/null 2>&1; then
+        lsof -nP -iTCP:${port} -sTCP:LISTEN > /dev/null 2>&1 && return 0
+    fi
+    return 1
+}
+
+gen_random_string() {
+    local length="$1"
+    openssl rand -base64 $((length * 2)) \
+        | tr -dc 'a-zA-Z0-9' \
+        | head -c "$length"
+}
+
+install_base() {
+    echo -e "${green}正在更新并安装依赖包...${plain}"
+    case "${release}" in
+        ubuntu | debian | armbian)
+            apt-get update > /dev/null 2>&1 && apt-get install -y -q cron curl tar tzdata socat openssl > /dev/null 2>&1
+            ;;
+        fedora | amzn | virtuozzo | rhel | almalinux | rocky | ol)
+            dnf -y update > /dev/null 2>&1 && dnf install -y -q cronie curl tar tzdata socat openssl > /dev/null 2>&1
+            ;;
+        centos)
+            if [[ "${VERSION_ID}" =~ ^7 ]]; then
+                yum -y update > /dev/null 2>&1 && yum install -y -q cronie curl tar tzdata socat openssl > /dev/null 2>&1
+            else
+                dnf -y update > /dev/null 2>&1 && dnf install -y -q cronie curl tar tzdata socat openssl > /dev/null 2>&1
+            fi
+            ;;
+        arch | manjaro | parch)
+            pacman -Syu > /dev/null 2>&1 && pacman -Syu --noconfirm cronie curl tar tzdata socat openssl > /dev/null 2>&1
+            ;;
+        opensuse-tumbleweed | opensuse-leap)
+            zypper refresh > /dev/null 2>&1 && zypper -q install -y cron curl tar timezone socat openssl > /dev/null 2>&1
+            ;;
+        alpine)
+            apk update > /dev/null 2>&1 && apk add dcron curl tar tzdata socat openssl > /dev/null 2>&1
+            ;;
+        *)
+            apt-get update > /dev/null 2>&1 && apt install -y -q cron curl tar tzdata socat openssl > /dev/null 2>&1
+            ;;
+    esac
+}
+
+install_acme() {
+    echo -e "${green}正在安装 acme.sh 以管理 SSL 证书...${plain}"
+    cd ~ || return 1
+    curl -s https://get.acme.sh | sh > /dev/null 2>&1
+    if [ $? -ne 0 ]; then
+        echo -e "${red}安装 acme.sh 失败${plain}"
+        return 1
+    else
+        echo -e "${green}acme.sh 安装成功${plain}"
+    fi
+    return 0
+}
+
+setup_ssl_certificate() {
+    local domain="$1"
+    local server_ip="$2"
+    local existing_port="$3"
+    local existing_webBasePath="$4"
+
+    echo -e "${green}正在设置 SSL 证书...${plain}"
+
+    # 检查是否已安装 acme.sh
+    if ! command -v ~/.acme.sh/acme.sh &> /dev/null; then
+        install_acme
+        if [ $? -ne 0 ]; then
+            echo -e "${yellow}安装 acme.sh 失败，跳过 SSL 设置${plain}"
+            return 1
+        fi
+    fi
+
+    # 创建证书目录
+    local certPath="/root/cert/${domain}"
+    mkdir -p "$certPath"
+
+    # 颁发证书
+    echo -e "${green}正在为 ${domain} 颁发 SSL 证书...${plain}"
+    echo -e "${yellow}注意：端口 80 必须开放并可从互联网访问${plain}"
+
+    ~/.acme.sh/acme.sh --set-default-ca --server letsencrypt --force > /dev/null 2>&1
+    ~/.acme.sh/acme.sh --issue -d ${domain} --listen-v6 --standalone --httpport 80 --force
+
+    if [ $? -ne 0 ]; then
+        echo -e "${yellow}为 ${domain} 颁发证书失败${plain}"
+        echo -e "${yellow}请确保端口 80 开放，稍后使用 x-ui 重试${plain}"
+        rm -rf ~/.acme.sh/${domain} 2> /dev/null
+        rm -rf "$certPath" 2> /dev/null
+        return 1
+    fi
+
+    # 安装证书
+    ~/.acme.sh/acme.sh --installcert -d ${domain} \
+        --key-file /root/cert/${domain}/privkey.pem \
+        --fullchain-file /root/cert/${domain}/fullchain.pem \
+        --reloadcmd "systemctl restart x-ui" > /dev/null 2>&1
+
+    if [ $? -ne 0 ]; then
+        echo -e "${yellow}安装证书失败${plain}"
+        return 1
+    fi
+
+    # 启用自动续期
+    ~/.acme.sh/acme.sh --upgrade --auto-upgrade > /dev/null 2>&1
+    chmod 600 $certPath/privkey.pem 2> /dev/null
+    chmod 644 $certPath/fullchain.pem 2> /dev/null
+
+    # 为面板设置证书
+    local webCertFile="/root/cert/${domain}/fullchain.pem"
+    local webKeyFile="/root/cert/${domain}/privkey.pem"
+
+    if [[ -f "$webCertFile" && -f "$webKeyFile" ]]; then
+        ${xui_folder}/x-ui cert -webCert "$webCertFile" -webCertKey "$webKeyFile" > /dev/null 2>&1
+        echo -e "${green}SSL 证书安装并配置成功！${plain}"
+        return 0
+    else
+        echo -e "${yellow}未找到证书文件${plain}"
+        return 1
+    fi
+}
+
+# 使用短期配置文件颁发 Let's Encrypt IP 证书（有效期约 6 天）
+# 需要 acme.sh 和开放的端口 80 用于 HTTP-01 验证
+setup_ip_certificate() {
+    local ipv4="$1"
+    local ipv6="$2" # 可选
+
+    echo -e "${green}正在设置 Let's Encrypt IP 证书（短期配置文件）...${plain}"
+    echo -e "${yellow}注意：IP 证书有效期约为 6 天，将自动续期。${plain}"
+    echo -e "${yellow}默认监听端口为 80。如果您选择其他端口，请确保外部端口 80 转发到该端口。${plain}"
+
+    # 检查 acme.sh
+    if ! command -v ~/.acme.sh/acme.sh &> /dev/null; then
+        install_acme
+        if [ $? -ne 0 ]; then
+            echo -e "${red}安装 acme.sh 失败${plain}"
+            return 1
+        fi
+    fi
+
+    # 验证 IP 地址
+    if [[ -z "$ipv4" ]]; then
+        echo -e "${red}需要 IPv4 地址${plain}"
+        return 1
+    fi
+
+    if ! is_ipv4 "$ipv4"; then
+        echo -e "${red}无效的 IPv4 地址：$ipv4${plain}"
+        return 1
+    fi
+
+    # 创建证书目录
+    local certDir="/root/cert/ip"
+    mkdir -p "$certDir"
+
+    # 构建域参数
+    local domain_args="-d ${ipv4}"
+    if [[ -n "$ipv6" ]] && is_ipv6 "$ipv6"; then
+        domain_args="${domain_args} -d ${ipv6}"
+        echo -e "${green}包含 IPv6 地址：${ipv6}${plain}"
+    fi
+
+    # 设置自动续期的重载命令（添加 || true 以便在服务停止时不会失败）
+    local reloadCmd="systemctl restart x-ui 2>/dev/null || rc-service x-ui restart 2>/dev/null || true"
+
+    # 选择 HTTP-01 监听器的端口（默认 80，提示覆盖）
+    local WebPort=""
+    read -rp "用于 ACME HTTP-01 监听器的端口（默认 80）：" WebPort
+    WebPort="${WebPort:-80}"
+    if ! [[ "${WebPort}" =~ ^[0-9]+$ ]] || ((WebPort < 1 || WebPort > 65535)); then
+        echo -e "${red}提供的端口无效。回退到 80。${plain}"
+        WebPort=80
+    fi
+    echo -e "${green}使用端口 ${WebPort} 进行独立验证。${plain}"
+    if [[ "${WebPort}" -ne 80 ]]; then
+        echo -e "${yellow}提醒：Let's Encrypt 仍然通过端口 80 连接；将外部端口 80 转发到 ${WebPort}。${plain}"
+    fi
+
+    # 确保所选端口可用
+    while true; do
+        if is_port_in_use "${WebPort}"; then
+            echo -e "${yellow}端口 ${WebPort} 当前正在使用中。${plain}"
+
+            local alt_port=""
+            read -rp "输入另一个用于 acme.sh 独立监听器的端口（留空则中止）：" alt_port
+            alt_port="${alt_port// /}"
+            if [[ -z "${alt_port}" ]]; then
+                echo -e "${red}端口 ${WebPort} 繁忙；无法继续。${plain}"
+                return 1
+            fi
+            if ! [[ "${alt_port}" =~ ^[0-9]+$ ]] || ((alt_port < 1 || alt_port > 65535)); then
+                echo -e "${red}提供的端口无效。${plain}"
+                return 1
+            fi
+            WebPort="${alt_port}"
+            continue
+        else
+            echo -e "${green}端口 ${WebPort} 空闲，可以进行独立验证。${plain}"
+            break
+        fi
+    done
+
+    # 使用短期配置文件颁发证书
+    echo -e "${green}正在为 ${ipv4} 颁发 IP 证书...${plain}"
+    ~/.acme.sh/acme.sh --set-default-ca --server letsencrypt --force > /dev/null 2>&1
+
+    ~/.acme.sh/acme.sh --issue \
+        ${domain_args} \
+        --standalone \
+        --server letsencrypt \
+        --certificate-profile shortlived \
+        --days 6 \
+        --httpport ${WebPort} \
+        --force
+
+    if [ $? -ne 0 ]; then
+        echo -e "${red}颁发 IP 证书失败${plain}"
+        echo -e "${yellow}请确保端口 ${WebPort} 可访问（或从外部端口 80 转发）${plain}"
+        # 清理 IPv4 和 IPv6（如果指定）的 acme.sh 数据
+        rm -rf ~/.acme.sh/${ipv4} 2> /dev/null
+        [[ -n "$ipv6" ]] && rm -rf ~/.acme.sh/${ipv6} 2> /dev/null
+        rm -rf ${certDir} 2> /dev/null
+        return 1
+    fi
+
+    echo -e "${green}证书颁发成功，正在安装...${plain}"
+
+    # 安装证书
+    # 注意：如果 reloadcmd 失败，acme.sh 可能会报告“Reload error”并以非零退出，
+    # 但证书文件仍然已安装。我们检查文件而不是退出代码。
+    ~/.acme.sh/acme.sh --installcert -d ${ipv4} \
+        --key-file "${certDir}/privkey.pem" \
+        --fullchain-file "${certDir}/fullchain.pem" \
+        --reloadcmd "${reloadCmd}" 2>&1 || true
+
+    # 验证证书文件是否存在（不要依赖退出代码 - reloadcmd 失败会导致非零）
+    if [[ ! -f "${certDir}/fullchain.pem" || ! -f "${certDir}/privkey.pem" ]]; then
+        echo -e "${red}安装后未找到证书文件${plain}"
+        # 清理 IPv4 和 IPv6（如果指定）的 acme.sh 数据
+        rm -rf ~/.acme.sh/${ipv4} 2> /dev/null
+        [[ -n "$ipv6" ]] && rm -rf ~/.acme.sh/${ipv6} 2> /dev/null
+        rm -rf ${certDir} 2> /dev/null
+        return 1
+    fi
+
+    echo -e "${green}证书文件安装成功${plain}"
+
+    # 为 acme.sh 启用自动升级（确俜 cron 任务运行）
+    ~/.acme.sh/acme.sh --upgrade --auto-upgrade > /dev/null 2>&1
+
+    chmod 600 ${certDir}/privkey.pem 2> /dev/null
+    chmod 644 ${certDir}/fullchain.pem 2> /dev/null
+
+    # 配置面板使用证书
+    echo -e "${green}正在为面板设置证书路径...${plain}"
+    ${xui_folder}/x-ui cert -webCert "${certDir}/fullchain.pem" -webCertKey "${certDir}/privkey.pem"
+    if [ $? -ne 0 ]; then
+        echo -e "${yellow}警告：无法自动设置证书路径。${plain}"
+        echo -e "${yellow}您可能需要在面板设置中手动设置它们。${plain}"
+        echo -e "${yellow}证书路径：${certDir}/fullchain.pem${plain}"
+        echo -e "${yellow}密钥路径：${certDir}/privkey.pem${plain}"
+    else
+        echo -e "${green}证书路径设置成功！${plain}"
+    fi
+
+    echo -e "${green}IP 证书安装并配置成功！${plain}"
+    echo -e "${green}证书有效期约为 6 天，通过 acme.sh cron 任务自动续期。${plain}"
+    echo -e "${yellow}每次续期后面板将自动重启。${plain}"
+    return 0
+}
+
+# 通过 acme.sh 进行全面的 SSL 证书手动颁发
+ssl_cert_issue() {
+    local existing_webBasePath=$(${xui_folder}/x-ui setting -show true | grep 'webBasePath:' | awk -F': ' '{print $2}' | tr -d '[:space:]' | sed 's#^/##')
+    local existing_port=$(${xui_folder}/x-ui setting -show true | grep 'port:' | awk -F': ' '{print $2}' | tr -d '[:space:]')
+
+    # 首先检查 acme.sh
+    if ! command -v ~/.acme.sh/acme.sh &> /dev/null; then
+        echo "未找到 acme.sh。正在安装..."
+        cd ~ || return 1
+        curl -s https://get.acme.sh | sh
+        if [ $? -ne 0 ]; then
+            echo -e "${red}安装 acme.sh 失败${plain}"
+            return 1
+        else
+            echo -e "${green}acme.sh 安装成功${plain}"
+        fi
+    fi
+
+    # 获取域名，我们需要验证它
+    local domain=""
+    while true; do
+        read -rp "请输入您的域名：" domain
+        domain="${domain// /}" # 删除空格
+
+        if [[ -z "$domain" ]]; then
+            echo -e "${red}域名不能为空。请重试。${plain}"
+            continue
+        fi
+
+        if ! is_domain "$domain"; then
+            echo -e "${red}无效的域名格式：${domain}。请输入有效的域名。${plain}"
+            continue
+        fi
+
+        break
+    done
+    echo -e "${green}您的域名为：${domain}，正在检查...${plain}"
+    SSL_ISSUED_DOMAIN="${domain}"
+
+    # 检测现有证书，如果存在则重用
+    local cert_exists=0
+    if ~/.acme.sh/acme.sh --list 2> /dev/null | awk '{print $1}' | grep -Fxq "${domain}"; then
+        cert_exists=1
+        local certInfo=$(~/.acme.sh/acme.sh --list 2> /dev/null | grep -F "${domain}")
+        echo -e "${yellow}找到 ${domain} 的现有证书，将重用它。${plain}"
+        [[ -n "${certInfo}" ]] && echo "$certInfo"
+    else
+        echo -e "${green}您的域名已准备好颁发证书...${plain}"
+    fi
+
+    # 为证书创建目录
+    certPath="/root/cert/${domain}"
+    if [ ! -d "$certPath" ]; then
+        mkdir -p "$certPath"
+    else
+        rm -rf "$certPath"
+        mkdir -p "$certPath"
+    fi
+
+    # 获取独立服务器的端口号
+    local WebPort=80
+    read -rp "请选择要使用的端口（默认为 80）：" WebPort
+    if [[ ${WebPort} -gt 65535 || ${WebPort} -lt 1 ]]; then
+        echo -e "${yellow}您输入的 ${WebPort} 无效，将使用默认端口 80。${plain}"
+        WebPort=80
+    fi
+    echo -e "${green}将使用端口：${WebPort} 颁发证书。请确保此端口已开放。${plain}"
+
+    # 临时停止面板
+    echo -e "${yellow}正在临时停止面板...${plain}"
+    systemctl stop x-ui 2> /dev/null || rc-service x-ui stop 2> /dev/null
+
+    if [[ ${cert_exists} -eq 0 ]]; then
+        # 颁发证书
+        ~/.acme.sh/acme.sh --set-default-ca --server letsencrypt --force
+        ~/.acme.sh/acme.sh --issue -d ${domain} --listen-v6 --standalone --httpport ${WebPort} --force
+        if [ $? -ne 0 ]; then
+            echo -e "${red}颁发证书失败，请检查日志。${plain}"
+            rm -rf ~/.acme.sh/${domain}
+            systemctl start x-ui 2> /dev/null || rc-service x-ui start 2> /dev/null
+            return 1
+        else
+            echo -e "${green}颁发证书成功，正在安装证书...${plain}"
+        fi
+    else
+        echo -e "${green}使用现有证书，正在安装证书...${plain}"
+    fi
+
+    # 设置重载命令
+    reloadCmd="systemctl restart x-ui || rc-service x-ui restart"
+    echo -e "${green}ACME 的默认 --reloadcmd 为：${yellow}systemctl restart x-ui || rc-service x-ui restart${plain}"
+    echo -e "${green}此命令将在每次颁发和续期证书时运行。${plain}"
+    read -rp "您是否要修改 ACME 的 --reloadcmd？（y/n）：" setReloadcmd
+    if [[ "$setReloadcmd" == "y" || "$setReloadcmd" == "Y" ]]; then
+        echo -e "\n${green}\t1.${plain} 预设：systemctl reload nginx ; systemctl restart x-ui"
+        echo -e "${green}\t2.${plain} 输入您自己的命令"
+        echo -e "${green}\t0.${plain} 保持默认 reloadcmd"
+        read -rp "选择一个选项：" choice
+        case "$choice" in
+            1)
+                echo -e "${green}Reloadcmd 为：systemctl reload nginx ; systemctl restart x-ui${plain}"
+                reloadCmd="systemctl reload nginx ; systemctl restart x-ui"
+                ;;
+            2)
+                echo -e "${yellow}建议将 x-ui restart 放在最后${plain}"
+                read -rp "请输入您的自定义 reloadcmd：" reloadCmd
+                echo -e "${green}Reloadcmd 为：${reloadCmd}${plain}"
+                ;;
+            *)
+                echo -e "${green}保持默认 reloadcmd${plain}"
+                ;;
+        esac
+    fi
+
+    # 安装证书
+    local installOutput=""
+    installOutput=$(~/.acme.sh/acme.sh --installcert -d ${domain} \
+        --key-file /root/cert/${domain}/privkey.pem \
+        --fullchain-file /root/cert/${domain}/fullchain.pem --reloadcmd "${reloadCmd}" 2>&1)
+    local installRc=$?
+    echo "${installOutput}"
+
+    local installWroteFiles=0
+    if echo "${installOutput}" | grep -q "Installing key to:" && echo "${installOutput}" | grep -q "Installing full chain to:"; then
+        installWroteFiles=1
+    fi
+
+    if [[ -f "/root/cert/${domain}/privkey.pem" && -f "/root/cert/${domain}/fullchain.pem" && (${installRc} -eq 0 || ${installWroteFiles} -eq 1) ]]; then
+        echo -e "${green}安装证书成功，正在启用自动续期...${plain}"
+    else
+        echo -e "${red}安装证书失败，退出。${plain}"
+        if [[ ${cert_exists} -eq 0 ]]; then
+            rm -rf ~/.acme.sh/${domain}
+        fi
+        systemctl start x-ui 2> /dev/null || rc-service x-ui start 2> /dev/null
+        return 1
+    fi
+
+    # 启用自动续期
+    ~/.acme.sh/acme.sh --upgrade --auto-upgrade
+    if [ $? -ne 0 ]; then
+        echo -e "${yellow}自动续期设置出现问题，证书详情：${plain}"
+        ls -lah /root/cert/${domain}/
+        chmod 600 $certPath/privkey.pem
+        chmod 644 $certPath/fullchain.pem
+    else
+        echo -e "${green}自动续期成功，证书详情：${plain}"
+        ls -lah /root/cert/${domain}/
+        chmod 600 $certPath/privkey.pem
+        chmod 644 $certPath/fullchain.pem
+    fi
+
+    # 重启面板
+    systemctl start x-ui 2> /dev/null || rc-service x-ui start 2> /dev/null
+
+    # 提示用户在成功安装证书后设置面板路径
+    read -rp "您是否要为面板设置此证书？（y/n）：" setPanel
+    if [[ "$setPanel" == "y" || "$setPanel" == "Y" ]]; then
+        local webCertFile="/root/cert/${domain}/fullchain.pem"
+        local webKeyFile="/root/cert/${domain}/privkey.pem"
+
+        if [[ -f "$webCertFile" && -f "$webKeyFile" ]]; then
+            ${xui_folder}/x-ui cert -webCert "$webCertFile" -webCertKey "$webKeyFile"
+            echo -e "${green}已为面板设置证书路径${plain}"
+            echo -e "${green}证书文件：$webCertFile${plain}"
+            echo -e "${green}私钥文件：$webKeyFile${plain}"
+            echo ""
+            echo -e "${green}访问 URL：https://${domain}:${existing_port}/${existing_webBasePath}${plain}"
+            echo -e "${yellow}面板将重启以应用 SSL 证书...${plain}"
+            systemctl restart x-ui 2> /dev/null || rc-service x-ui restart 2> /dev/null
+        else
+            echo -e "${red}错误：未找到域名的证书或私钥文件：$domain。${plain}"
+        fi
+    else
+        echo -e "${yellow}跳过面板路径设置。${plain}"
+    fi
+
+    return 0
+}
+# 统一的交互式 SSL 设置（域或 IP）
+# 将全局 `SSL_HOST` 设置为所选的域/IP
+prompt_and_setup_ssl() {
+    local panel_port="$1"
+    local web_base_path="$2" # 预期不带前导斜杠
+    local server_ip="$3"
+
+    local ssl_choice=""
+
+    echo -e "${yellow}选择 SSL 证书设置方法：${plain}"
+    echo -e "${green}1.${plain} Let's Encrypt 域名证书（90 天有效期，自动续期）"
+    echo -e "${green}2.${plain} Let's Encrypt IP 地址证书（6 天有效期，自动续期）"
+    echo -e "${green}3.${plain} 自定义 SSL 证书（现有文件路径）"
+    echo -e "${blue}注意：${plain}选项 1 和 2 需要开放端口 80。选项 3 需要手动指定路径。"
+    read -rp "选择一个选项（默认为 2 用于 IP）：" ssl_choice
+    ssl_choice="${ssl_choice// /}" # 删除空格
+
+    # 如果输入为空或无效（不是 1 或 3），则默认为 2（IP 证书）
+    if [[ "$ssl_choice" != "1" && "$ssl_choice" != "3" ]]; then
+        ssl_choice="2"
+    fi
+
+    case "$ssl_choice" in
+        1)
+            # 用户选择了 Let's Encrypt 域名选项
+            echo -e "${green}使用 Let's Encrypt 颁发域名证书...${plain}"
+            if ssl_cert_issue; then
+                local cert_domain="${SSL_ISSUED_DOMAIN}"
+                if [[ -z "${cert_domain}" ]]; then
+                    cert_domain=$(~/.acme.sh/acme.sh --list 2> /dev/null | tail -1 | awk '{print $1}')
+                fi
+
+                if [[ -n "${cert_domain}" ]]; then
+                    SSL_HOST="${cert_domain}"
+                    echo -e "${green}✓ SSL 证书配置成功，域名：${cert_domain}${plain}"
+                else
+                    echo -e "${yellow}SSL 设置可能已完成，但域提取失败${plain}"
+                    SSL_HOST="${server_ip}"
+                fi
+            else
+                echo -e "${red}域名模式的 SSL 证书设置失败。${plain}"
+                SSL_HOST="${server_ip}"
+            fi
+            ;;
+        2)
+            # 用户选择了 Let's Encrypt IP 证书选项
+            echo -e "${green}使用 Let's Encrypt 颁发 IP 证书（短期配置文件）...${plain}"
+
+            # 询问可选的 IPv6
+            local ipv6_addr=""
+            read -rp "您有要包含的 IPv6 地址吗？（留空则跳过）：" ipv6_addr
+            ipv6_addr="${ipv6_addr// /}" # 删除空格
+
+            # 如果面板正在运行则停止（需要端口 80）
+            if [[ $release == "alpine" ]]; then
+                rc-service x-ui stop > /dev/null 2>&1
+            else
+                systemctl stop x-ui > /dev/null 2>&1
+            fi
+
+            setup_ip_certificate "${server_ip}" "${ipv6_addr}"
+            if [ $? -eq 0 ]; then
+                SSL_HOST="${server_ip}"
+                echo -e "${green}✓ Let's Encrypt IP 证书配置成功${plain}"
+            else
+                echo -e "${red}✗ IP 证书设置失败。请检查端口 80 是否开放。${plain}"
+                SSL_HOST="${server_ip}"
+            fi
+
+            # SSL 配置后重启面板（重启应用新证书设置）
+            if [[ $release == "alpine" ]]; then
+                rc-service x-ui restart > /dev/null 2>&1
+            else
+                systemctl restart x-ui > /dev/null 2>&1
+            fi
+
+            ;;
+        3)
+            # 用户选择了自定义路径（用户提供）选项
+            echo -e "${green}使用自定义现有证书...${plain}"
+            local custom_cert=""
+            local custom_key=""
+            local custom_domain=""
+
+            # 3.1 请求域名以稍后组成面板 URL
+            read -rp "请输入证书颁发的域名：" custom_domain
+            custom_domain="${custom_domain// /}" # 删除空格
+
+            # 3.2 循环获取证书路径
+            while true; do
+                read -rp "输入证书路径（关键词：.crt / fullchain）：" custom_cert
+                # 如果存在则删除引号
+                custom_cert=$(echo "$custom_cert" | tr -d '"' | tr -d "'")
+
+                if [[ -f "$custom_cert" && -r "$custom_cert" && -s "$custom_cert" ]]; then
+                    break
+                elif [[ ! -f "$custom_cert" ]]; then
+                    echo -e "${red}错误：文件不存在！请重试。${plain}"
+                elif [[ ! -r "$custom_cert" ]]; then
+                    echo -e "${red}错误：文件存在但不可读（检查权限）！${plain}"
+                else
+                    echo -e "${red}错误：文件为空！${plain}"
+                fi
+            done
+
+            # 3.3 循环获取私钥路径
+            while true; do
+                read -rp "输入私钥路径（关键词：.key / privatekey）：" custom_key
+                # 如果存在则删除引号
+                custom_key=$(echo "$custom_key" | tr -d '"' | tr -d "'")
+
+                if [[ -f "$custom_key" && -r "$custom_key" && -s "$custom_key" ]]; then
+                    break
+                elif [[ ! -f "$custom_key" ]]; then
+                    echo -e "${red}错误：文件不存在！请重试。${plain}"
+                elif [[ ! -r "$custom_key" ]]; then
+                    echo -e "${red}错误：文件存在但不可读（检查权限）！${plain}"
+                else
+                    echo -e "${red}错误：文件为空！${plain}"
+                fi
+            done
+
+            # 3.4 通过 x-ui 二进制文件应用设置
+            ${xui_folder}/x-ui cert -webCert "$custom_cert" -webCertKey "$custom_key" > /dev/null 2>&1
+
+            # 设置 SSL_HOST 以组成面板 URL
+            if [[ -n "$custom_domain" ]]; then
+                SSL_HOST="$custom_domain"
+            else
+                SSL_HOST="${server_ip}"
+            fi
+
+            echo -e "${green}✓ 已应用自定义证书路径。${plain}"
+            echo -e "${yellow}注意：您需要负责在外部续期这些文件。${plain}"
+
+            systemctl restart x-ui > /dev/null 2>&1 || rc-service x-ui restart > /dev/null 2>&1
+            ;;
+        *)
+            echo -e "${red}无效选项。跳过 SSL 设置。${plain}"
+            SSL_HOST="${server_ip}"
+            ;;
+    esac
+}
+
+config_after_update() {
+    echo -e "${yellow}x-ui 设置：${plain}"
+    ${xui_folder}/x-ui setting -show true
+    ${xui_folder}/x-ui migrate
+
+    # 通过检查 cert: 行是否存在并且后面有内容来正确检测空证书
+    local existing_cert=$(${xui_folder}/x-ui setting -getCert true 2> /dev/null | grep 'cert:' | awk -F': ' '{print $2}' | tr -d '[:space:]')
+    local existing_port=$(${xui_folder}/x-ui setting -show true | grep -Eo 'port: .+' | awk '{print $2}')
+    local existing_webBasePath=$(${xui_folder}/x-ui setting -show true | grep -Eo 'webBasePath: .+' | awk '{print $2}' | sed 's#^/##')
+
+    # 获取服务器 IP
+    local URL_lists=(
+        "https://api4.ipify.org"
+        "https://ipv4.icanhazip.com"
+        "https://v4.api.ipinfo.io/ip"
+        "https://ipv4.myexternalip.com/raw"
+        "https://4.ident.me"
+        "https://check-host.net/ip"
+    )
+    local server_ip=""
+    for ip_address in "${URL_lists[@]}"; do
+        local response=$(curl -s -w "\n%{http_code}" --max-time 3 "${ip_address}" 2> /dev/null)
+        local http_code=$(echo "$response" | tail -n1)
+        local ip_result=$(echo "$response" | head -n-1 | tr -d '[:space:]"')
+        if [[ "${http_code}" == "200" && "${ip_result}" =~ ^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$ ]]; then
+            server_ip="${ip_result}"
+            break
+        fi
+    done
+
+    if [[ -z "$server_ip" ]]; then
+        echo -e "${yellow}无法从任何提供商自动检测服务器 IP。${plain}"
+        while [[ -z "$server_ip" ]]; do
+            read -rp "请输入您服务器的公共 IPv4 地址：" server_ip
+            server_ip="${server_ip// /}"
+            if [[ ! "$server_ip" =~ ^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$ ]]; then
+                echo -e "${red}无效的 IPv4 地址。请重试。${plain}"
+                server_ip=""
+            fi
+        done
+    fi
+
+    # 处理缺失/过短的 webBasePath
+    if [[ ${#existing_webBasePath} -lt 4 ]]; then
+        echo -e "${yellow}WebBasePath 缺失或太短。正在生成一个新的...${plain}"
+        local config_webBasePath=$(gen_random_string 18)
+        ${xui_folder}/x-ui setting -webBasePath "${config_webBasePath}"
+        existing_webBasePath="${config_webBasePath}"
+        echo -e "${green}新的 WebBasePath：${config_webBasePath}${plain}"
+    fi
+
+    # 如果缺少 SSL，则检查并提示
+    if [[ -z "$existing_cert" ]]; then
+        echo ""
+        echo -e "${red}═══════════════════════════════════════════${plain}"
+        echo -e "${red}      ⚠ 未检测到 SSL 证书 ⚠     ${plain}"
+        echo -e "${red}═══════════════════════════════════════════${plain}"
+        echo -e "${yellow}为了安全起见，所有面板都强制要求 SSL 证书。${plain}"
+        echo -e "${yellow}Let's Encrypt 现在支持域名和 IP 地址！${plain}"
+        echo ""
+
+        # 提示并设置 SSL（域或 IP）
+        prompt_and_setup_ssl "${existing_port}" "${existing_webBasePath}" "${server_ip}"
+
+        echo ""
+        echo -e "${green}═══════════════════════════════════════════${plain}"
+        echo -e "${green}     面板访问信息              ${plain}"
+        echo -e "${green}═══════════════════════════════════════════${plain}"
+        echo -e "${green}访问 URL：https://${SSL_HOST}:${existing_port}/${existing_webBasePath}${plain}"
+        echo -e "${green}═══════════════════════════════════════════${plain}"
+        echo -e "${yellow}⚠ SSL 证书：已启用并配置${plain}"
+    else
+        echo -e "${green}SSL 证书已配置${plain}"
+        # 显示带有现有证书的访问 URL
+        local cert_domain=$(basename "$(dirname "$existing_cert")")
+        echo ""
+        echo -e "${green}═══════════════════════════════════════════${plain}"
+        echo -e "${green}     面板访问信息              ${plain}"
+        echo -e "${green}═══════════════════════════════════════════${plain}"
+        echo -e "${green}访问 URL：https://${cert_domain}:${existing_port}/${existing_webBasePath}${plain}"
+        echo -e "${green}═══════════════════════════════════════════${plain}"
+    fi
+}
+
+update_x-ui() {
+    cd ${xui_folder%/x-ui}/
+
+    if [ -f "${xui_folder}/x-ui" ]; then
+        current_xui_version=$(${xui_folder}/x-ui -v)
+        echo -e "${green}当前 x-ui 版本：${current_xui_version}${plain}"
+    else
+        _fail "错误：当前 x-ui 版本：未知"
+    fi
+
+    echo -e "${green}正在下载新的 x-ui 版本...${plain}"
+
+    tag_version=$(${curl_bin} -Ls "https://api.github.com/repos/MHSanaei/3x-ui/releases/latest" 2> /dev/null | grep '"tag_name":' | sed -E 's/.*"([^"]+)".*/\1/')
+    if [[ ! -n "$tag_version" ]]; then
+        echo -e "${yellow}尝试使用 IPv4 获取版本...${plain}"
+        tag_version=$(${curl_bin} -4 -Ls "https://api.github.com/repos/MHSanaei/3x-ui/releases/latest" | grep '"tag_name":' | sed -E 's/.*"([^"]+)".*/\1/')
+        if [[ ! -n "$tag_version" ]]; then
+            _fail "错误：无法获取 x-ui 版本，可能是由于 GitHub API 限制，请稍后重试"
+        fi
+    fi
+    echo -e "获取到 x-ui 最新版本：${tag_version}，开始安装..."
+    ${curl_bin} -fLRo ${xui_folder}-linux-$(arch).tar.gz https://github.com/MHSanaei/3x-ui/releases/download/${tag_version}/x-ui-linux-$(arch).tar.gz 2> /dev/null
+    if [[ $? -ne 0 ]]; then
+        echo -e "${yellow}尝试使用 IPv4 获取版本...${plain}"
+        ${curl_bin} -4fLRo ${xui_folder}-linux-$(arch).tar.gz https://github.com/MHSanaei/3x-ui/releases/download/${tag_version}/x-ui-linux-$(arch).tar.gz 2> /dev/null
+        if [[ $? -ne 0 ]]; then
+            _fail "错误：无法下载 x-ui，请确保您的服务器可以访问 GitHub"
+        fi
+    fi
+
+    if [[ -e ${xui_folder}/ ]]; then
+        echo -e "${green}正在停止 x-ui...${plain}"
+        if [[ $release == "alpine" ]]; then
+            if [ -f "/etc/init.d/x-ui" ]; then
+                rc-service x-ui stop > /dev/null 2>&1
+                rc-update del x-ui > /dev/null 2>&1
+                echo -e "${green}正在删除旧的服务单元版本...${plain}"
+                rm -f /etc/init.d/x-ui > /dev/null 2>&1
+            else
+                rm x-ui-linux-$(arch).tar.gz -f > /dev/null 2>&1
+                _fail "错误：未安装 x-ui 服务单元。"
+            fi
+        else
+            if [ -f "${xui_service}/x-ui.service" ]; then
+                systemctl stop x-ui > /dev/null 2>&1
+                systemctl disable x-ui > /dev/null 2>&1
+                echo -e "${green}正在删除旧的 systemd 单元版本...${plain}"
+                rm ${xui_service}/x-ui.service -f > /dev/null 2>&1
+                systemctl daemon-reload > /dev/null 2>&1
+            else
+                rm x-ui-linux-$(arch).tar.gz -f > /dev/null 2>&1
+                _fail "错误：未安装 x-ui systemd 单元。"
+            fi
+        fi
+        echo -e "${green}正在删除旧的 x-ui 版本...${plain}"
+        rm ${xui_folder} -f > /dev/null 2>&1
+        rm ${xui_folder}/x-ui.service -f > /dev/null 2>&1
+        rm ${xui_folder}/x-ui.service.debian -f > /dev/null 2>&1
+        rm ${xui_folder}/x-ui.service.arch -f > /dev/null 2>&1
+        rm ${xui_folder}/x-ui.service.rhel -f > /dev/null 2>&1
+        rm ${xui_folder}/x-ui -f > /dev/null 2>&1
+        rm ${xui_folder}/x-ui_zh_cn.sh -f > /dev/null 2>&1
+        echo -e "${green}正在删除旧的 xray 版本...${plain}"
+        rm ${xui_folder}/bin/xray-linux-amd64 -f > /dev/null 2>&1
+        echo -e "${green}正在删除旧的 README 和 LICENSE 文件...${plain}"
+        rm ${xui_folder}/bin/README.md -f > /dev/null 2>&1
+        rm ${xui_folder}/bin/LICENSE -f > /dev/null 2>&1
+    else
+        rm x-ui-linux-$(arch).tar.gz -f > /dev/null 2>&1
+        _fail "错误：未安装 x-ui。"
+    fi
+
+    echo -e "${green}正在安装新的 x-ui 版本...${plain}"
+    tar zxvf x-ui-linux-$(arch).tar.gz > /dev/null 2>&1
+    rm x-ui-linux-$(arch).tar.gz -f > /dev/null 2>&1
+    cd x-ui > /dev/null 2>&1
+    chmod +x x-ui > /dev/null 2>&1
+
+    # 检查系统架构并相应地重命名文件
+    if [[ $(arch) == "armv5" || $(arch) == "armv6" || $(arch) == "armv7" ]]; then
+        mv bin/xray-linux-$(arch) bin/xray-linux-arm > /dev/null 2>&1
+        chmod +x bin/xray-linux-arm > /dev/null 2>&1
+    fi
+
+    chmod +x x-ui bin/xray-linux-$(arch) > /dev/null 2>&1
+
+    echo -e "${green}正在下载并安装 x-ui_zh_cn.sh 脚本...${plain}"
+    ${curl_bin} -fLRo /usr/bin/x-ui https://raw.githubusercontent.com/xsdxq-null/3X-UI-CN/main/x-ui_zh_cn.sh > /dev/null 2>&1
+    if [[ $? -ne 0 ]]; then
+        echo -e "${yellow}尝试使用 IPv4 获取 x-ui...${plain}"
+        ${curl_bin} -4fLRo /usr/bin/x-ui https://raw.githubusercontent.com/xsdxq-null/3X-UI-CN/main/x-ui_zh_cn.sh > /dev/null 2>&1
+        if [[ $? -ne 0 ]]; then
+            _fail "错误：无法下载 x-ui_zh_cn.sh 脚本，请确保您的服务器可以访问 GitHub"
+        fi
+    fi
+
+    chmod +x ${xui_folder}/x-ui_zh_cn.sh > /dev/null 2>&1
+    chmod +x /usr/bin/x-ui > /dev/null 2>&1
+    mkdir -p /var/log/x-ui > /dev/null 2>&1
+
+    echo -e "${green}正在更改所有者...${plain}"
+    chown -R root:root ${xui_folder} > /dev/null 2>&1
+
+    if [ -f "${xui_folder}/bin/config.json" ]; then
+        echo -e "${green}正在更改配置文件权限...${plain}"
+        chmod 640 ${xui_folder}/bin/config.json > /dev/null 2>&1
+    fi
+
+    if [[ $release == "alpine" ]]; then
+        echo -e "${green}正在下载并安装启动单元 x-ui.rc...${plain}"
+        ${curl_bin} -fLRo /etc/init.d/x-ui https://raw.githubusercontent.com/MHSanaei/3x-ui/main/x-ui.rc > /dev/null 2>&1
+        if [[ $? -ne 0 ]]; then
+            ${curl_bin} -4fLRo /etc/init.d/x-ui https://raw.githubusercontent.com/MHSanaei/3x-ui/main/x-ui.rc > /dev/null 2>&1
+            if [[ $? -ne 0 ]]; then
+                _fail "错误：无法下载启动单元 x-ui.rc，请确保您的服务器可以访问 GitHub"
+            fi
+        fi
+        chmod +x /etc/init.d/x-ui > /dev/null 2>&1
+        chown root:root /etc/init.d/x-ui > /dev/null 2>&1
+        rc-update add x-ui > /dev/null 2>&1
+        rc-service x-ui start > /dev/null 2>&1
+    else
+        if [ -f "x-ui.service" ]; then
+            echo -e "${green}正在安装 systemd 单元...${plain}"
+            cp -f x-ui.service ${xui_service}/ > /dev/null 2>&1
+            if [[ $? -ne 0 ]]; then
+                echo -e "${red}复制 x-ui.service 失败${plain}"
+                exit 1
+            fi
+        else
+            service_installed=false
+            case "${release}" in
+                ubuntu | debian | armbian)
+                    if [ -f "x-ui.service.debian" ]; then
+                        echo -e "${green}正在安装类 debian 的 systemd 单元...${plain}"
+                        cp -f x-ui.service.debian ${xui_service}/x-ui.service > /dev/null 2>&1
+                        if [[ $? -eq 0 ]]; then
+                            service_installed=true
+                        fi
+                    fi
+                    ;;
+                arch | manjaro | parch)
+                    if [ -f "x-ui.service.arch" ]; then
+                        echo -e "${green}正在安装类 arch 的 systemd 单元...${plain}"
+                        cp -f x-ui.service.arch ${xui_service}/x-ui.service > /dev/null 2>&1
+                        if [[ $? -eq 0 ]]; then
+                            service_installed=true
+                        fi
+                    fi
+                    ;;
+                *)
+                    if [ -f "x-ui.service.rhel" ]; then
+                        echo -e "${green}正在安装类 rhel 的 systemd 单元...${plain}"
+                        cp -f x-ui.service.rhel ${xui_service}/x-ui.service > /dev/null 2>&1
+                        if [[ $? -eq 0 ]]; then
+                            service_installed=true
+                        fi
+                    fi
+                    ;;
+            esac
+
+            # 如果在 tar.gz 中未找到服务文件，则从 GitHub 下载
+            if [ "$service_installed" = false ]; then
+                echo -e "${yellow}在 tar.gz 中未找到服务文件，正在从 GitHub 下载...${plain}"
+                case "${release}" in
+                    ubuntu | debian | armbian)
+                        ${curl_bin} -4fLRo ${xui_service}/x-ui.service https://raw.githubusercontent.com/MHSanaei/3x-ui/main/x-ui.service.debian > /dev/null 2>&1
+                        ;;
+                    arch | manjaro | parch)
+                        ${curl_bin} -4fLRo ${xui_service}/x-ui.service https://raw.githubusercontent.com/MHSanaei/3x-ui/main/x-ui.service.arch > /dev/null 2>&1
+                        ;;
+                    *)
+                        ${curl_bin} -4fLRo ${xui_service}/x-ui.service https://raw.githubusercontent.com/MHSanaei/3x-ui/main/x-ui.service.rhel > /dev/null 2>&1
+                        ;;
+                esac
+
+                if [[ $? -ne 0 ]]; then
+                    echo -e "${red}从 GitHub 安装 x-ui.service 失败${plain}"
+                    exit 1
+                fi
+            fi
+        fi
+        chown root:root ${xui_service}/x-ui.service > /dev/null 2>&1
+        chmod 644 ${xui_service}/x-ui.service > /dev/null 2>&1
+        systemctl daemon-reload > /dev/null 2>&1
+        systemctl enable x-ui > /dev/null 2>&1
+        systemctl start x-ui > /dev/null 2>&1
+    fi
+
+    config_after_update
+
+    echo -e "${green}x-ui ${tag_version}${plain} 更新完成，正在运行..."
+    echo -e ""
+    echo -e "┌───────────────────────────────────────────────────────┐
+╔═══════════════════════════════════════════════════════╗
+║  ${blue}x-ui 控制菜单用法（子命令）:${plain}                         ║
+║                                                       ║
+║  ${blue}x-ui${plain}              - 管理脚本                        ║
+║  ${blue}x-ui start${plain}        - 启动                            ║
+║  ${blue}x-ui stop${plain}         - 停止                            ║
+║  ${blue}x-ui restart${plain}      - 重启                            ║
+║  ${blue}x-ui status${plain}       - 当前状态                        ║
+║  ${blue}x-ui settings${plain}     - 当前设置                        ║
+║  ${blue}x-ui enable${plain}       - 启用开机自启                    ║
+║  ${blue}x-ui disable${plain}      - 禁用开机自启                    ║
+║  ${blue}x-ui log${plain}          - 查看日志                        ║
+║  ${blue}x-ui banlog${plain}       - 查看 Fail2ban 禁止日志          ║
+║  ${blue}x-ui update${plain}       - 更新                            ║
+║  ${blue}x-ui legacy${plain}       - 旧版本                          ║
+║  ${blue}x-ui install${plain}      - 安装                            ║
+║  ${blue}x-ui uninstall${plain}    - 卸载                            ║
+╚═══════════════════════════════════════════════════════╝"
+}
+
+echo -e "${green}正在运行...${plain}"
+install_base
+update_x-ui $1
diff --git a/x-ui_zh_cn.sh b/x-ui_zh_cn.sh
index 4201b39a..1847c543 100644
--- a/x-ui_zh_cn.sh
+++ b/x-ui_zh_cn.sh
@@ -108,7 +108,7 @@ before_show_menu() {
 }
 
 install() {
-    bash <(curl -Ls https://raw.githubusercontent.com/MHSanaei/3x-ui/main/install.sh)
+    bash <(curl -Ls https://raw.githubusercontent.com/xsdxq-null/3X-UI-CN/main/install_zh_cn.sh)
     if [[ $? == 0 ]]; then
         if [[ $# == 0 ]]; then
             start
@@ -127,7 +127,7 @@ update() {
         fi
         return 0
     fi
-    bash <(curl -Ls https://raw.githubusercontent.com/MHSanaei/3x-ui/main/update.sh)
+    bash <(curl -Ls https://raw.githubusercontent.com/xsdxq-null/3X-UI-CN/main/update_zh_cn.sh)
     if [[ $? == 0 ]]; then
         LOGI "更新完成，面板已自动重启"
         before_show_menu
@@ -167,7 +167,7 @@ legacy_version() {
         exit 1
     fi
     # 使用输入的面板版本在下载链接中
-    install_command="bash <(curl -Ls "https://raw.githubusercontent.com/mhsanaei/3x-ui/v$tag_version/install.sh") v$tag_version"
+    install_command="bash <(curl -Ls "https://raw.githubusercontent.com/xsdxq-null/3X-UI-CN/v$tag_version/install_zh_cn.sh") v$tag_version"
 
     echo "正在下载并安装面板版本 $tag_version..."
     eval $install_command
@@ -206,7 +206,7 @@ uninstall() {
     echo ""
     echo -e "卸载成功。\n"
     echo "如果您需要重新安装此面板，可以使用以下命令："
-    echo -e "${green}bash <(curl -Ls https://raw.githubusercontent.com/mhsanaei/3x-ui/master/install.sh)${plain}"
+    echo -e "${green}bash <(curl -Ls https://raw.githubusercontent.com/xsdxq-null/3X-UI-CN/main/install_zh_cn.sh)${plain}"
     echo ""
     # 捕获 SIGTERM 信号
     trap delete_script SIGTERM