From c4b456229403c8e7dca979fd8a3dc34c33c0a96b Mon Sep 17 00:00:00 2001
From: Peyman <118217228+Ptechgithub@users.noreply.github.com>
Date: Tue, 9 May 2023 00:14:02 +0330
Subject: [PATCH] Delete x-ui.sh

---
 x-ui.sh | 808 --------------------------------------------------------
 1 file changed, 808 deletions(-)
 delete mode 100644 x-ui.sh

diff --git a/x-ui.sh b/x-ui.sh
deleted file mode 100644
index 7f304ea0..00000000
--- a/x-ui.sh
+++ /dev/null
@@ -1,808 +0,0 @@
-#!/bin/bash
-
-red='\033[0;31m'
-green='\033[0;32m'
-yellow='\033[0;33m'
-plain='\033[0m'
-
-#Add some basic function here
-function LOGD() {
-    echo -e "${yellow}[DEG] $* ${plain}"
-}
-
-function LOGE() {
-    echo -e "${red}[ERR] $* ${plain}"
-}
-
-function LOGI() {
-    echo -e "${green}[INF] $* ${plain}"
-}
-
-# check root
-[[ $EUID -ne 0 ]] && LOGE "ERROR: You must be root to run this script! \n" && exit 1
-
-# Check OS and set release variable
-if [[ -f /etc/os-release ]]; then
-    source /etc/os-release
-    release=$ID
-elif [[ -f /usr/lib/os-release ]]; then
-    source /usr/lib/os-release
-    release=$ID
-else
-    echo "Failed to check the system OS, please contact the author!" >&2
-    exit 1
-fi
-
-echo "The OS release is: $release"
-
-os_version=""
-os_version=$(grep -i version_id /etc/os-release | cut -d \" -f2 | cut -d . -f1)
-
-if [[ "${release}" == "centos" ]]; then
-    if [[ ${os_version} -lt 8 ]]; then
-        echo -e "${red} Please use CentOS 8 or higher ${plain}\n" && exit 1
-    fi
-elif [[ "${release}" ==  "ubuntu" ]]; then
-    if [[ ${os_version} -lt 20 ]]; then
-        echo -e "${red}please use Ubuntu 20 or higher version! ${plain}\n" && exit 1
-    fi
-elif [[ "${release}" == "fedora" ]]; then
-    if [[ ${os_version} -lt 36 ]]; then
-        echo -e "${red}please use Fedora 36 or higher version! ${plain}\n" && exit 1
-    fi
-elif [[ "${release}" == "debian" ]]; then
-    if [[ ${os_version} -lt 10 ]]; then
-        echo -e "${red} Please use Debian 10 or higher ${plain}\n" && exit 1
-    fi
-fi
-
-confirm() {
-    if [[ $# > 1 ]]; then
-        echo && read -p "$1 [Default $2]: " temp
-        if [[ "${temp}" == "" ]]; then
-            temp=$2
-        fi
-    else
-        read -p "$1 [y/n]: " temp
-    fi
-    if [[ "${temp}" == "y" || "${temp}" == "Y" ]]; then
-        return 0
-    else
-        return 1
-    fi
-}
-
-confirm_restart() {
-    confirm "Restart the panel, Attention: Restarting the panel will also restart xray" "y"
-    if [[ $? == 0 ]]; then
-        restart
-    else
-        show_menu
-    fi
-}
-
-before_show_menu() {
-    echo && echo -n -e "${yellow}Press enter to return to the main menu: ${plain}" && read temp
-    show_menu
-}
-
-install() {
-    bash <(curl -Ls https://raw.githubusercontent.com/MHSanaei/3x-ui/main/install.sh)
-    if [[ $? == 0 ]]; then
-        if [[ $# == 0 ]]; then
-            start
-        else
-            start 0
-        fi
-    fi
-}
-
-update() {
-    confirm "This function will forcefully reinstall the latest version, and the data will not be lost. Do you want to continue?" "n"
-    if [[ $? != 0 ]]; then
-        LOGE "Cancelled"
-        if [[ $# == 0 ]]; then
-            before_show_menu
-        fi
-        return 0
-    fi
-    bash <(curl -Ls https://raw.githubusercontent.com/MHSanaei/3x-ui/main/install.sh)
-    if [[ $? == 0 ]]; then
-        LOGI "Update is complete, Panel has automatically restarted "
-        exit 0
-    fi
-}
-
-uninstall() {
-    confirm "Are you sure you want to uninstall the panel? xray will also uninstalled!" "n"
-    if [[ $? != 0 ]]; then
-        if [[ $# == 0 ]]; then
-            show_menu
-        fi
-        return 0
-    fi
-    systemctl stop x-ui
-    systemctl disable x-ui
-    rm /etc/systemd/system/x-ui.service -f
-    systemctl daemon-reload
-    systemctl reset-failed
-    rm /etc/x-ui/ -rf
-    rm /usr/local/x-ui/ -rf
-
-    echo ""
-    echo -e "Uninstalled Successfully, If you want to remove this script, then after exiting the script run ${green}rm /usr/bin/x-ui -f${plain} to delete it."
-    echo ""
-
-    if [[ $# == 0 ]]; then
-        before_show_menu
-    fi
-}
-
-reset_user() {
-    confirm "Are you sure to reset the username and password of the panel?" "n"
-    if [[ $? != 0 ]]; then
-        if [[ $# == 0 ]]; then
-            show_menu
-        fi
-        return 0
-    fi
-    read -rp "Please set the login username [default is a random username]: " config_account
-    [[ -z $config_account ]] && config_account=$(date +%s%N | md5sum | cut -c 1-8)
-    read -rp "Please set the login password [default is a random password]: " config_password
-    [[ -z $config_password ]] && config_password=$(date +%s%N | md5sum | cut -c 1-8)
-    /usr/local/x-ui/x-ui setting -username ${config_account} -password ${config_password} >/dev/null 2>&1
-    /usr/local/x-ui/x-ui setting -remove_secret >/dev/null 2>&1
-    echo -e "Panel login username has been reset to: ${green} ${config_account} ${plain}"
-    echo -e "Panel login password has been reset to: ${green} ${config_password} ${plain}"
-    echo -e "${yellow} Panel login secret token disabled ${plain}"
-    echo -e "${green} Please use the new login username and password to access the X-UI panel. Also remember them! ${plain}"
-    confirm_restart
-}
-
-reset_config() {
-    confirm "Are you sure you want to reset all panel settings, Account data will not be lost, Username and password will not change" "n"
-    if [[ $? != 0 ]]; then
-        if [[ $# == 0 ]]; then
-            show_menu
-        fi
-        return 0
-    fi
-    /usr/local/x-ui/x-ui setting -reset
-    echo -e "All panel settings have been reset to default, Please restart the panel now, and use the default ${green}2053${plain} Port to Access the web Panel"
-    confirm_restart
-}
-
-check_config() {
-    info=$(/usr/local/x-ui/x-ui setting -show true)
-    if [[ $? != 0 ]]; then
-        LOGE "get current settings error, please check logs"
-        show_menu
-    fi
-    LOGI "${info}"
-}
-
-set_port() {
-    echo && echo -n -e "Enter port number[1-65535]: " && read port
-    if [[ -z "${port}" ]]; then
-        LOGD "Cancelled"
-        before_show_menu
-    else
-        /usr/local/x-ui/x-ui setting -port ${port}
-        echo -e "The port is set, Please restart the panel now, and use the new port ${green}${port}${plain} to access web panel"
-        confirm_restart
-    fi
-}
-
-start() {
-    check_status
-    if [[ $? == 0 ]]; then
-        echo ""
-        LOGI "Panel is running, No need to start again, If you need to restart, please select restart"
-    else
-        systemctl start x-ui
-        sleep 2
-        check_status
-        if [[ $? == 0 ]]; then
-            LOGI "x-ui Started Successfully"
-        else
-            LOGE "panel Failed to start, Probably because it takes longer than two seconds to start, Please check the log information later"
-        fi
-    fi
-
-    if [[ $# == 0 ]]; then
-        before_show_menu
-    fi
-}
-
-stop() {
-    check_status
-    if [[ $? == 1 ]]; then
-        echo ""
-        LOGI "Panel stopped, No need to stop again!"
-    else
-        systemctl stop x-ui
-        sleep 2
-        check_status
-        if [[ $? == 1 ]]; then
-            LOGI "x-ui and xray stopped successfully"
-        else
-            LOGE "Panel stop failed, Probably because the stop time exceeds two seconds, Please check the log information later"
-        fi
-    fi
-
-    if [[ $# == 0 ]]; then
-        before_show_menu
-    fi
-}
-
-restart() {
-    systemctl restart x-ui
-    sleep 2
-    check_status
-    if [[ $? == 0 ]]; then
-        LOGI "x-ui and xray Restarted successfully"
-    else
-        LOGE "Panel restart failed, Probably because it takes longer than two seconds to start, Please check the log information later"
-    fi
-    if [[ $# == 0 ]]; then
-        before_show_menu
-    fi
-}
-
-status() {
-    systemctl status x-ui -l
-    if [[ $# == 0 ]]; then
-        before_show_menu
-    fi
-}
-
-enable() {
-    systemctl enable x-ui
-    if [[ $? == 0 ]]; then
-        LOGI "x-ui Set to boot automatically on startup successfully"
-    else
-        LOGE "x-ui Failed to set Autostart"
-    fi
-
-    if [[ $# == 0 ]]; then
-        before_show_menu
-    fi
-}
-
-disable() {
-    systemctl disable x-ui
-    if [[ $? == 0 ]]; then
-        LOGI "x-ui Autostart Cancelled successfully"
-    else
-        LOGE "x-ui Failed to cancel autostart"
-    fi
-
-    if [[ $# == 0 ]]; then
-        before_show_menu
-    fi
-}
-
-show_log() {
-    journalctl -u x-ui.service -e --no-pager -f
-    if [[ $# == 0 ]]; then
-        before_show_menu
-    fi
-}
-
-enable_bbr() {
-    if grep -q "net.core.default_qdisc=fq" /etc/sysctl.conf && grep -q "net.ipv4.tcp_congestion_control=bbr" /etc/sysctl.conf; then
-        echo -e "${green}BBR is already enabled!${plain}"
-        exit 0
-    fi
-
-    # Check the OS and install necessary packages
-    if [[ "$(cat /etc/os-release | grep -E '^ID=' | awk -F '=' '{print $2}')" == "ubuntu" ]]; then
-        sudo apt-get update && sudo apt-get install -yqq --no-install-recommends ca-certificates
-    elif [[ "$(cat /etc/os-release | grep -E '^ID=' | awk -F '=' '{print $2}')" == "debian" ]]; then
-        sudo apt-get update && sudo apt-get install -yqq --no-install-recommends ca-certificates
-    elif [[ "$(cat /etc/os-release | grep -E '^ID=' | awk -F '=' '{print $2}')" == "fedora" ]]; then
-        sudo dnf -y update && sudo dnf -y install ca-certificates
-    elif [[ "$(cat /etc/os-release | grep -E '^ID=' | awk -F '=' '{print $2}')" == "centos" ]]; then
-        sudo yum -y update && sudo yum -y install ca-certificates
-    else
-        echo "Unsupported operating system. Please check the script and install the necessary packages manually."
-        exit 1
-    fi
-
-    # Enable BBR
-    echo "net.core.default_qdisc=fq" | sudo tee -a /etc/sysctl.conf
-    echo "net.ipv4.tcp_congestion_control=bbr" | sudo tee -a /etc/sysctl.conf
-
-    # Apply changes
-    sudo sysctl -p
-
-    # Verify that BBR is enabled
-    if [[ $(sysctl net.ipv4.tcp_congestion_control | awk '{print $3}') == "bbr" ]]; then
-        echo -e "${green}BBR has been enabled successfully.${plain}"
-    else
-        echo -e "${red}Failed to enable BBR. Please check your system configuration.${plain}"
-    fi
-}
-
-update_shell() {
-    wget -O /usr/bin/x-ui -N --no-check-certificate https://github.com/MHSanaei/3x-ui/raw/main/x-ui.sh
-    if [[ $? != 0 ]]; then
-        echo ""
-        LOGE "Failed to download script, Please check whether the machine can connect Github"
-        before_show_menu
-    else
-        chmod +x /usr/bin/x-ui
-        LOGI "Upgrade script succeeded, Please rerun the script" && exit 0
-    fi
-}
-
-# 0: running, 1: not running, 2: not installed
-check_status() {
-    if [[ ! -f /etc/systemd/system/x-ui.service ]]; then
-        return 2
-    fi
-    temp=$(systemctl status x-ui | grep Active | awk '{print $3}' | cut -d "(" -f2 | cut -d ")" -f1)
-    if [[ "${temp}" == "running" ]]; then
-        return 0
-    else
-        return 1
-    fi
-}
-
-check_enabled() {
-    temp=$(systemctl is-enabled x-ui)
-    if [[ "${temp}" == "enabled" ]]; then
-        return 0
-    else
-        return 1
-    fi
-}
-
-check_uninstall() {
-    check_status
-    if [[ $? != 2 ]]; then
-        echo ""
-        LOGE "Panel installed, Please do not reinstall"
-        if [[ $# == 0 ]]; then
-            before_show_menu
-        fi
-        return 1
-    else
-        return 0
-    fi
-}
-
-check_install() {
-    check_status
-    if [[ $? == 2 ]]; then
-        echo ""
-        LOGE "Please install the panel first"
-        if [[ $# == 0 ]]; then
-            before_show_menu
-        fi
-        return 1
-    else
-        return 0
-    fi
-}
-
-show_status() {
-    check_status
-    case $? in
-    0)
-        echo -e "Panel state: ${green}Running${plain}"
-        show_enable_status
-        ;;
-    1)
-        echo -e "Panel state: ${yellow}Not Running${plain}"
-        show_enable_status
-        ;;
-    2)
-        echo -e "Panel state: ${red}Not Installed${plain}"
-        ;;
-    esac
-    show_xray_status
-}
-
-show_enable_status() {
-    check_enabled
-    if [[ $? == 0 ]]; then
-        echo -e "Start automatically: ${green}Yes${plain}"
-    else
-        echo -e "Start automatically: ${red}No${plain}"
-    fi
-}
-
-check_xray_status() {
-    count=$(ps -ef | grep "xray-linux" | grep -v "grep" | wc -l)
-    if [[ count -ne 0 ]]; then
-        return 0
-    else
-        return 1
-    fi
-}
-
-show_xray_status() {
-    check_xray_status
-    if [[ $? == 0 ]]; then
-        echo -e "xray state: ${green}Running${plain}"
-    else
-        echo -e "xray state: ${red}Not Running${plain}"
-    fi
-}
-
-open_ports() {
-    if ! command -v ufw &> /dev/null
-    then
-        echo "ufw firewall is not installed. Installing now..."
-        sudo apt-get update
-        sudo apt-get install -y ufw
-    else
-        echo "ufw firewall is already installed"
-    fi
-
-    # Check if the firewall is inactive
-    if sudo ufw status | grep -q "Status: active"; then
-        echo "firewall is already active"
-    else
-        # Open the necessary ports
-        sudo ufw allow ssh
-        sudo ufw allow http
-        sudo ufw allow https
-        sudo ufw allow 2053/tcp
-
-        # Enable the firewall
-        sudo ufw --force enable
-    fi
-
-    # Prompt the user to enter a list of ports
-    read -p "Enter the ports you want to open (e.g. 80,443,2053 or range 400-500): " ports
-
-    # Check if the input is valid
-    if ! [[ $ports =~ ^([0-9]+|[0-9]+-[0-9]+)(,([0-9]+|[0-9]+-[0-9]+))*$ ]]; then
-        echo "Error: Invalid input. Please enter a comma-separated list of ports or a range of ports (e.g. 80,443,2053 or 400-500)." >&2; exit 1
-    fi
-
-    # Open the specified ports using ufw
-    IFS=',' read -ra PORT_LIST <<< "$ports"
-    for port in "${PORT_LIST[@]}"; do
-        if [[ $port == *-* ]]; then
-        # Split the range into start and end ports
-        start_port=$(echo $port | cut -d'-' -f1)
-        end_port=$(echo $port | cut -d'-' -f2)
-        # Loop through the range and open each port
-        for ((i=start_port; i<=end_port; i++)); do
-            sudo ufw allow $i
-        done
-        else
-        sudo ufw allow "$port"
-        fi
-    done
-
-    # Confirm that the ports are open
-    sudo ufw status | grep $ports
-}
-
-update_geo() {
-    local defaultBinFolder="/usr/local/x-ui/bin"
-    read -p "Please enter x-ui bin folder path. Leave blank for default. (Default: '${defaultBinFolder}')" binFolder
-    binFolder=${binFolder:-${defaultBinFolder}}
-    if [[ ! -d ${binFolder} ]]; then
-        LOGE "Folder ${binFolder} not exists!"
-        LOGI "making bin folder: ${binFolder}..."
-        mkdir -p ${binFolder}
-    fi
-
-    systemctl stop x-ui
-    cd ${binFolder}
-    rm -f geoip.dat geosite.dat iran.dat
-    wget -N https://github.com/Loyalsoldier/v2ray-rules-dat/releases/latest/download/geoip.dat
-    wget -N https://github.com/Loyalsoldier/v2ray-rules-dat/releases/latest/download/geosite.dat
-    wget -N https://github.com/bootmortis/iran-hosted-domains/releases/latest/download/iran.dat
-    systemctl start x-ui
-    echo -e "${green}Geosite.dat + Geoip.dat + Iran.dat have been updated successfully in bin folder '${binfolder}'!${plain}"
-    before_show_menu
-}
-
-install_acme() {
-    cd ~
-    LOGI "install acme..."
-    curl https://get.acme.sh | sh
-    if [ $? -ne 0 ]; then
-        LOGE "install acme failed"
-        return 1
-    else
-        LOGI "install acme succeed"
-    fi
-    return 0
-}
-
-#method for standalone mode
-ssl_cert_issue() {
-    #check for acme.sh first
-    if ! command -v ~/.acme.sh/acme.sh &>/dev/null; then
-        echo "acme.sh could not be found. we will install it"
-        install_acme
-        if [ $? -ne 0 ]; then
-            LOGE "install acme failed, please check logs"
-            exit 1
-        fi
-    fi
-    #install socat second
-    if [[ "${release}" == "centos" ]] || [[ "${release}" == "fedora" ]] ; then
-        yum install socat -y
-    else
-        apt install socat -y
-    fi
-    if [ $? -ne 0 ]; then
-        LOGE "install socat failed,please check logs"
-        exit 1
-    else
-        LOGI "install socat succeed..."
-    fi
-
-    #get the domain here,and we need verify it
-    local domain=""
-    read -p "Please enter your domain name:" domain
-    LOGD "your domain is:${domain},check it..."
-    #here we need to judge whether there exists cert already
-    local currentCert=$(~/.acme.sh/acme.sh --list | tail -1 | awk '{print $1}')
-    if [ ${currentCert} == ${domain} ]; then
-        local certInfo=$(~/.acme.sh/acme.sh --list)
-        LOGE "system already have certs here,can not issue again,current certs details:"
-        LOGI "$certInfo"
-        exit 1
-    else
-        LOGI "your domain is ready for issuing cert now..."
-    fi
-	
-	#create a directory for install cert
-	certPath="/root/cert/${domain}"
-	if [ ! -d "$certPath" ]; then
-		mkdir -p "$certPath"
-	else
-		rm -rf "$certPath"
-		mkdir -p "$certPath"
-	fi
-	
-    #get needed port here
-    local WebPort=80
-    read -p "please choose which port do you use,default will be 80 port:" WebPort
-    if [[ ${WebPort} -gt 65535 || ${WebPort} -lt 1 ]]; then
-        LOGE "your input ${WebPort} is invalid,will use default port"
-    fi
-    LOGI "will use port:${WebPort} to issue certs,please make sure this port is open..."
-    #NOTE:This should be handled by user
-    #open the port and kill the occupied progress
-    ~/.acme.sh/acme.sh --set-default-ca --server letsencrypt
-    ~/.acme.sh/acme.sh --issue -d ${domain} --standalone --httpport ${WebPort}
-    if [ $? -ne 0 ]; then
-        LOGE "issue certs failed,please check logs"
-        rm -rf ~/.acme.sh/${domain}
-        exit 1
-    else
-        LOGE "issue certs succeed,installing certs..."
-    fi
-    #install cert
-    ~/.acme.sh/acme.sh --installcert -d ${domain} \
-        --key-file /root/cert/${domain}/privkey.pem \
-        --fullchain-file /root/cert/${domain}/fullchain.pem
-
-    if [ $? -ne 0 ]; then
-        LOGE "install certs failed,exit"
-        rm -rf ~/.acme.sh/${domain}
-        exit 1
-    else
-        LOGI "install certs succeed,enable auto renew..."
-    fi
-	
-	~/.acme.sh/acme.sh --upgrade --auto-upgrade
-	if [ $? -ne 0 ]; then
-		LOGE "auto renew failed, certs details:"
-		ls -lah cert/*
-		chmod 755 $certPath/*
-		exit 1
-	else
-		LOGI "auto renew succeed, certs details:"
-		ls -lah cert/*
-		chmod 755 $certPath/*
-	fi
-
-}
-
-
-warp_fixchatgpt() {
-    curl -fsSL https://gist.githubusercontent.com/hamid-gh98/dc5dd9b0cc5b0412af927b1ccdb294c7/raw/install_warp_proxy.sh | bash
-    echo ""
-    before_show_menu
-}
-
-run_speedtest() {
-    # Check if Speedtest is already installed
-    if ! command -v speedtest &> /dev/null; then
-        # If not installed, install it
-        if command -v dnf &> /dev/null; then
-            sudo dnf install -y curl
-            curl -s https://packagecloud.io/install/repositories/ookla/speedtest-cli/script.rpm.sh | sudo bash
-            sudo dnf install -y speedtest
-        elif command -v yum &> /dev/null; then
-            sudo yum install -y curl
-            curl -s https://packagecloud.io/install/repositories/ookla/speedtest-cli/script.rpm.sh | sudo bash
-            sudo yum install -y speedtest
-        elif command -v apt-get &> /dev/null; then
-            sudo apt-get update && sudo apt-get install -y curl
-            curl -s https://packagecloud.io/install/repositories/ookla/speedtest-cli/script.deb.sh | sudo bash
-            sudo apt-get install -y speedtest
-        elif command -v apt &> /dev/null; then
-            sudo apt update && sudo apt install -y curl
-            curl -s https://packagecloud.io/install/repositories/ookla/speedtest-cli/script.deb.sh | sudo bash
-            sudo apt install -y speedtest
-        else
-            echo "Error: Package manager not found. You may need to install Speedtest manually."
-            return 1
-        fi
-    fi
-
-    # Run Speedtest
-    speedtest
-}
-
-
-
-show_usage() {
-    echo "x-ui control menu usages: "
-    echo "------------------------------------------"
-    echo -e "x-ui              - Enter control menu"
-    echo -e "x-ui start        - Start x-ui "
-    echo -e "x-ui stop         - Stop  x-ui "
-    echo -e "x-ui restart      - Restart x-ui "
-    echo -e "x-ui status       - Show x-ui status"
-    echo -e "x-ui enable       - Enable x-ui on system startup"
-    echo -e "x-ui disable      - Disable x-ui on system startup"
-    echo -e "x-ui log          - Check x-ui logs"
-    echo -e "x-ui update       - Update x-ui "
-    echo -e "x-ui install      - Install x-ui "
-    echo -e "x-ui uninstall    - Uninstall x-ui "
-    echo "------------------------------------------"
-}
-
-show_menu() {
-    echo -e "
-  ${green}3X-ui Panel Management Script${plain}
-  ${green}0.${plain} Exit Script
-————————————————
-  ${green}1.${plain} Install x-ui
-  ${green}2.${plain} Update x-ui
-  ${green}3.${plain} Uninstall x-ui
-————————————————
-  ${green}4.${plain} Reset Username & Password & Secret Token
-  ${green}5.${plain} Reset Panel Settings
-  ${green}6.${plain} Change Panel Port
-  ${green}7.${plain} View Current Panel Settings
-————————————————
-  ${green}8.${plain} Start x-ui
-  ${green}9.${plain} Stop x-ui
-  ${green}10.${plain} Restart x-ui
-  ${green}11.${plain} Check x-ui Status
-  ${green}12.${plain} Check x-ui Logs
-————————————————
-  ${green}13.${plain} Enable x-ui On System Startup
-  ${green}14.${plain} Disable x-ui On System Startup
-————————————————
-  ${green}15.${plain} Enable BBR 
-  ${green}16.${plain} Apply for an SSL Certificate
-  ${green}17.${plain} Update Geo Files
-  ${green}18.${plain} Active Firewall and open ports
-  ${green}19.${plain} Install WARP
-  ${green}20.${plain} Speedtest by Ookla
- "
-    show_status
-    echo && read -p "Please enter your selection [0-20]: " num
-
-    case "${num}" in
-    0)
-        exit 0
-        ;;
-    1)
-        check_uninstall && install
-        ;;
-    2)
-        check_install && update
-        ;;
-    3)
-        check_install && uninstall
-        ;;
-    4)
-        check_install && reset_user
-        ;;
-    5)
-        check_install && reset_config
-        ;;
-    6)
-        check_install && set_port
-        ;;
-    7)
-        check_install && check_config
-        ;;
-    8)
-        check_install && start
-        ;;
-    9)
-        check_install && stop
-        ;;
-    10)
-        check_install && restart
-        ;;
-    11)
-        check_install && status
-        ;;
-    12)
-        check_install && show_log
-        ;;
-    13)
-        check_install && enable
-        ;;
-    14)
-        check_install && disable
-        ;;
-    15)
-        enable_bbr
-        ;;
-    16)
-        ssl_cert_issue
-        ;;
-    17)
-        update_geo
-        ;;
-    18)
-        open_ports
-        ;;
-    19)
-        warp_fixchatgpt
-        ;;
-	20)
-        run_speedtest
-        ;;
-    *)
-        LOGE "Please enter the correct number [0-20]"
-        ;;
-    esac
-}
-
-if [[ $# > 0 ]]; then
-    case $1 in
-    "start")
-        check_install 0 && start 0
-        ;;
-    "stop")
-        check_install 0 && stop 0
-        ;;
-    "restart")
-        check_install 0 && restart 0
-        ;;
-    "status")
-        check_install 0 && status 0
-        ;;
-    "enable")
-        check_install 0 && enable 0
-        ;;
-    "disable")
-        check_install 0 && disable 0
-        ;;
-    "log")
-        check_install 0 && show_log 0
-        ;;
-    "update")
-        check_install 0 && update 0
-        ;;
-    "install")
-        check_uninstall 0 && install 0
-        ;;
-    "uninstall")
-        check_install 0 && uninstall 0
-        ;;
-    *) show_usage ;;
-    esac
-else
-    show_menu
-fi