diff --git a/install.sh b/install.sh
new file mode 100644
index 00000000..20d9776e
--- /dev/null
+++ b/install.sh
@@ -0,0 +1,175 @@
+#!/bin/bash
+
+red='\033[0;31m'
+green='\033[0;32m'
+yellow='\033[0;33m'
+plain='\033[0m'
+
+cur_dir=$(pwd)
+
+# check root
+[[ $EUID -ne 0 ]] && echo -e "${red}Fatal error：${plain} Please run this script with root privilege \n " && exit 1
+
+# Check OS and set release variable
+if [[ -f /etc/os-release ]]; then
+    source /etc/os-release
+    release=$ID
+elif [[ -f /usr/lib/os-release ]]; then
+    source /usr/lib/os-release
+    release=$ID
+else
+    echo "Failed to check the system OS, please contact the author!" >&2
+    exit 1
+fi
+echo "The OS release is: $release"
+
+arch3xui() {
+    case "$(uname -m)" in
+        x86_64 | x64 | amd64 ) echo 'amd64' ;;
+        armv8 | arm64 | aarch64 ) echo 'arm64' ;;
+        * ) echo -e "${green}Unsupported CPU architecture! ${plain}" && rm -f install.sh && exit 1 ;;
+    esac
+}
+echo "arch: $(arch3xui)"
+
+os_version=""
+os_version=$(grep -i version_id /etc/os-release | cut -d \" -f2 | cut -d . -f1)
+
+if [[ "${release}" == "centos" ]]; then
+    if [[ ${os_version} -lt 8 ]]; then
+        echo -e "${red} Please use CentOS 8 or higher ${plain}\n" && exit 1
+    fi
+elif [[ "${release}" ==  "ubuntu" ]]; then
+    if [[ ${os_version} -lt 20 ]]; then
+        echo -e "${red}please use Ubuntu 20 or higher version！${plain}\n" && exit 1
+    fi
+
+elif [[ "${release}" == "fedora" ]]; then
+    if [[ ${os_version} -lt 36 ]]; then
+        echo -e "${red}please use Fedora 36 or higher version！${plain}\n" && exit 1
+    fi
+
+elif [[ "${release}" == "debian" ]]; then
+    if [[ ${os_version} -lt 10 ]]; then
+        echo -e "${red} Please use Debian 10 or higher ${plain}\n" && exit 1
+    fi
+else
+    echo -e "${red}Failed to check the OS version, please contact the author!${plain}" && exit 1
+fi
+
+install_base() {
+    case "${release}" in
+        centos|fedora)
+            yum install -y -q wget curl tar
+            ;;
+        *)
+            apt install -y -q wget curl tar
+            ;;
+    esac
+}
+
+#This function will be called when user installed x-ui out of sercurity
+config_after_install() {
+    /usr/local/x-ui/x-ui migrate
+    echo -e "${yellow}Install/update finished! For security it's recommended to modify panel settings ${plain}"
+    read -p "Do you want to continue with the modification [y/n]? ": config_confirm
+    if [[ "${config_confirm}" == "y" || "${config_confirm}" == "Y" ]]; then
+        read -p "Please set up your username:" config_account
+        echo -e "${yellow}Your username will be:${config_account}${plain}"
+        read -p "Please set up your password:" config_password
+        echo -e "${yellow}Your password will be:${config_password}${plain}"
+        read -p "Please set up the panel port:" config_port
+        echo -e "${yellow}Your panel port is:${config_port}${plain}"
+        echo -e "${yellow}Initializing, please wait...${plain}"
+        /usr/local/x-ui/x-ui setting -username ${config_account} -password ${config_password}
+        echo -e "${yellow}Account name and password set successfully!${plain}"
+        /usr/local/x-ui/x-ui setting -port ${config_port}
+        echo -e "${yellow}Panel port set successfully!${plain}"
+    else
+        echo -e "${red}cancel...${plain}"
+        if [[ ! -f "/etc/x-ui/x-ui.db" ]]; then
+            local usernameTemp=$(head -c 6 /dev/urandom | base64)
+            local passwordTemp=$(head -c 6 /dev/urandom | base64)
+            /usr/local/x-ui/x-ui setting -username ${usernameTemp} -password ${passwordTemp}
+            echo -e "this is a fresh installation,will generate random login info for security concerns:"
+            echo -e "###############################################"
+            echo -e "${green}username:${usernameTemp}${plain}"
+            echo -e "${green}password:${passwordTemp}${plain}"
+            echo -e "###############################################"
+            echo -e "${red}if you forgot your login info,you can type x-ui and then type 7 to check after installation${plain}"
+        else
+            echo -e "${red} this is your upgrade,will keep old settings,if you forgot your login info,you can type x-ui and then type 7 to check${plain}"
+        fi
+    fi
+}
+
+install_x-ui() {
+    systemctl stop x-ui
+    cd /usr/local/
+
+    if [ $# == 0 ]; then
+        last_version=$(curl -Ls "https://api.github.com/repos/Ptechgithub/3x-ui/releases/latest" | grep '"tag_name":' | sed -E 's/.*"([^"]+)".*/\1/')
+        if [[ ! -n "$last_version" ]]; then
+            echo -e "${red}Failed to fetch x-ui version, it maybe due to Github API restrictions, please try it later${plain}"
+            exit 1
+        fi
+        echo -e "Got x-ui latest version: ${last_version}, beginning the installation..."
+        wget -N --no-check-certificate -O /usr/local/x-ui-linux-$(arch3xui).tar.gz https://github.com/Ptechgithub/3x-ui/releases/download/${last_version}/x-ui-linux-$(arch3xui).tar.gz
+        if [[ $? -ne 0 ]]; then
+            echo -e "${red}Downloading x-ui failed, please be sure that your server can access Github ${plain}"
+            exit 1
+        fi
+    else
+        last_version=$1
+        url="https://github.com/Ptechgithub/3x-ui/releases/download/${last_version}/x-ui-linux-$(arch3xui).tar.gz"
+        echo -e "Begining to install x-ui $1"
+        wget -N --no-check-certificate -O /usr/local/x-ui-linux-$(arch3xui).tar.gz ${url}
+        if [[ $? -ne 0 ]]; then
+            echo -e "${red}Download x-ui $1 failed,please check the version exists ${plain}"
+            exit 1
+        fi
+    fi
+
+    if [[ -e /usr/local/x-ui/ ]]; then
+        rm /usr/local/x-ui/ -rf
+    fi
+
+    tar zxvf x-ui-linux-$(arch3xui).tar.gz
+    rm x-ui-linux-$(arch3xui).tar.gz -f
+    cd x-ui
+    chmod +x x-ui bin/xray-linux-$(arch3xui)
+    cp -f x-ui.service /etc/systemd/system/
+    wget --no-check-certificate -O /usr/bin/x-ui https://raw.githubusercontent.com/Ptechgithub/3x-ui/main/x-ui.sh
+    chmod +x /usr/local/x-ui/x-ui.sh
+    chmod +x /usr/bin/x-ui
+    config_after_install
+    #echo -e "If it is a new installation, the default web port is ${green}2053${plain}, The username and password are ${green}admin${plain} by default"
+    #echo -e "Please make sure that this port is not occupied by other procedures,${yellow} And make sure that port 2053 has been released${plain}"
+    #    echo -e "If you want to modify the 2053 to other ports and enter the x-ui command to modify it, you must also ensure that the port you modify is also released"
+    #echo -e ""
+    #echo -e "If it is updated panel, access the panel in your previous way"
+    #echo -e ""
+    systemctl daemon-reload
+    systemctl enable x-ui
+    systemctl start x-ui
+    echo -e "${green}x-ui ${last_version}${plain} installation finished, it is running now..."
+    echo -e ""
+    echo -e "x-ui control menu usages: "
+    echo -e "----------------------------------------------"
+    echo -e "x-ui              - Enter     Admin menu"
+    echo -e "x-ui start        - Start     x-ui"
+    echo -e "x-ui stop         - Stop      x-ui"
+    echo -e "x-ui restart      - Restart   x-ui"
+    echo -e "x-ui status       - Show      x-ui status"
+    echo -e "x-ui enable       - Enable    x-ui on system startup"
+    echo -e "x-ui disable      - Disable   x-ui on system startup"
+    echo -e "x-ui log          - Check     x-ui logs"
+    echo -e "x-ui update       - Update    x-ui"
+    echo -e "x-ui install      - Install   x-ui"
+    echo -e "x-ui uninstall    - Uninstall x-ui"
+    echo -e "---------t.me/P_tech2024----------------"
+}
+
+echo -e "${green}Running...${plain}"
+install_base
+install_x-ui $1
diff --git a/x-ui.sh b/x-ui.sh
new file mode 100644
index 00000000..d3db6996
--- /dev/null
+++ b/x-ui.sh
@@ -0,0 +1,808 @@
+#!/bin/bash
+
+red='\033[0;31m'
+green='\033[0;32m'
+yellow='\033[0;33m'
+plain='\033[0m'
+
+#Add some basic function here
+function LOGD() {
+    echo -e "${yellow}[DEG] $* ${plain}"
+}
+
+function LOGE() {
+    echo -e "${red}[ERR] $* ${plain}"
+}
+
+function LOGI() {
+    echo -e "${green}[INF] $* ${plain}"
+}
+
+# check root
+[[ $EUID -ne 0 ]] && LOGE "ERROR: You must be root to run this script! \n" && exit 1
+
+# Check OS and set release variable
+if [[ -f /etc/os-release ]]; then
+    source /etc/os-release
+    release=$ID
+elif [[ -f /usr/lib/os-release ]]; then
+    source /usr/lib/os-release
+    release=$ID
+else
+    echo "Failed to check the system OS, please contact the author!" >&2
+    exit 1
+fi
+
+echo "The OS release is: $release"
+
+os_version=""
+os_version=$(grep -i version_id /etc/os-release | cut -d \" -f2 | cut -d . -f1)
+
+if [[ "${release}" == "centos" ]]; then
+    if [[ ${os_version} -lt 8 ]]; then
+        echo -e "${red} Please use CentOS 8 or higher ${plain}\n" && exit 1
+    fi
+elif [[ "${release}" ==  "ubuntu" ]]; then
+    if [[ ${os_version} -lt 20 ]]; then
+        echo -e "${red}please use Ubuntu 20 or higher version! ${plain}\n" && exit 1
+    fi
+elif [[ "${release}" == "fedora" ]]; then
+    if [[ ${os_version} -lt 36 ]]; then
+        echo -e "${red}please use Fedora 36 or higher version! ${plain}\n" && exit 1
+    fi
+elif [[ "${release}" == "debian" ]]; then
+    if [[ ${os_version} -lt 10 ]]; then
+        echo -e "${red} Please use Debian 10 or higher ${plain}\n" && exit 1
+    fi
+fi
+
+confirm() {
+    if [[ $# > 1 ]]; then
+        echo && read -p "$1 [Default $2]: " temp
+        if [[ "${temp}" == "" ]]; then
+            temp=$2
+        fi
+    else
+        read -p "$1 [y/n]: " temp
+    fi
+    if [[ "${temp}" == "y" || "${temp}" == "Y" ]]; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+confirm_restart() {
+    confirm "Restart the panel, Attention: Restarting the panel will also restart xray" "y"
+    if [[ $? == 0 ]]; then
+        restart
+    else
+        show_menu
+    fi
+}
+
+before_show_menu() {
+    echo && echo -n -e "${yellow}Press enter to return to the main menu: ${plain}" && read temp
+    show_menu
+}
+
+install() {
+    bash <(curl -Ls https://raw.githubusercontent.com/Ptechgithub/3x-ui/main/install.sh)
+    if [[ $? == 0 ]]; then
+        if [[ $# == 0 ]]; then
+            start
+        else
+            start 0
+        fi
+    fi
+}
+
+update() {
+    confirm "This function will forcefully reinstall the latest version, and the data will not be lost. Do you want to continue?" "n"
+    if [[ $? != 0 ]]; then
+        LOGE "Cancelled"
+        if [[ $# == 0 ]]; then
+            before_show_menu
+        fi
+        return 0
+    fi
+    bash <(curl -Ls https://raw.githubusercontent.com/Ptechgithub/3x-ui/main/install.sh)
+    if [[ $? == 0 ]]; then
+        LOGI "Update is complete, Panel has automatically restarted "
+        exit 0
+    fi
+}
+
+uninstall() {
+    confirm "Are you sure you want to uninstall the panel? xray will also uninstalled!" "n"
+    if [[ $? != 0 ]]; then
+        if [[ $# == 0 ]]; then
+            show_menu
+        fi
+        return 0
+    fi
+    systemctl stop x-ui
+    systemctl disable x-ui
+    rm /etc/systemd/system/x-ui.service -f
+    systemctl daemon-reload
+    systemctl reset-failed
+    rm /etc/x-ui/ -rf
+    rm /usr/local/x-ui/ -rf
+
+    echo ""
+    echo -e "Uninstalled Successfully, If you want to remove this script, then after exiting the script run ${green}rm /usr/bin/x-ui -f${plain} to delete it."
+    echo ""
+
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+reset_user() {
+    confirm "Are you sure to reset the username and password of the panel?" "n"
+    if [[ $? != 0 ]]; then
+        if [[ $# == 0 ]]; then
+            show_menu
+        fi
+        return 0
+    fi
+    read -rp "Please set the login username [default is a random username]: " config_account
+    [[ -z $config_account ]] && config_account=$(date +%s%N | md5sum | cut -c 1-8)
+    read -rp "Please set the login password [default is a random password]: " config_password
+    [[ -z $config_password ]] && config_password=$(date +%s%N | md5sum | cut -c 1-8)
+    /usr/local/x-ui/x-ui setting -username ${config_account} -password ${config_password} >/dev/null 2>&1
+    /usr/local/x-ui/x-ui setting -remove_secret >/dev/null 2>&1
+    echo -e "Panel login username has been reset to: ${green} ${config_account} ${plain}"
+    echo -e "Panel login password has been reset to: ${green} ${config_password} ${plain}"
+    echo -e "${yellow} Panel login secret token disabled ${plain}"
+    echo -e "${green} Please use the new login username and password to access the X-UI panel. Also remember them! ${plain}"
+    confirm_restart
+}
+
+reset_config() {
+    confirm "Are you sure you want to reset all panel settings, Account data will not be lost, Username and password will not change" "n"
+    if [[ $? != 0 ]]; then
+        if [[ $# == 0 ]]; then
+            show_menu
+        fi
+        return 0
+    fi
+    /usr/local/x-ui/x-ui setting -reset
+    echo -e "All panel settings have been reset to default, Please restart the panel now, and use the default ${green}2053${plain} Port to Access the web Panel"
+    confirm_restart
+}
+
+check_config() {
+    info=$(/usr/local/x-ui/x-ui setting -show true)
+    if [[ $? != 0 ]]; then
+        LOGE "get current settings error, please check logs"
+        show_menu
+    fi
+    LOGI "${info}"
+}
+
+set_port() {
+    echo && echo -n -e "Enter port number[1-65535]: " && read port
+    if [[ -z "${port}" ]]; then
+        LOGD "Cancelled"
+        before_show_menu
+    else
+        /usr/local/x-ui/x-ui setting -port ${port}
+        echo -e "The port is set, Please restart the panel now, and use the new port ${green}${port}${plain} to access web panel"
+        confirm_restart
+    fi
+}
+
+start() {
+    check_status
+    if [[ $? == 0 ]]; then
+        echo ""
+        LOGI "Panel is running, No need to start again, If you need to restart, please select restart"
+    else
+        systemctl start x-ui
+        sleep 2
+        check_status
+        if [[ $? == 0 ]]; then
+            LOGI "x-ui Started Successfully"
+        else
+            LOGE "panel Failed to start, Probably because it takes longer than two seconds to start, Please check the log information later"
+        fi
+    fi
+
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+stop() {
+    check_status
+    if [[ $? == 1 ]]; then
+        echo ""
+        LOGI "Panel stopped, No need to stop again!"
+    else
+        systemctl stop x-ui
+        sleep 2
+        check_status
+        if [[ $? == 1 ]]; then
+            LOGI "x-ui and xray stopped successfully"
+        else
+            LOGE "Panel stop failed, Probably because the stop time exceeds two seconds, Please check the log information later"
+        fi
+    fi
+
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+restart() {
+    systemctl restart x-ui
+    sleep 2
+    check_status
+    if [[ $? == 0 ]]; then
+        LOGI "x-ui and xray Restarted successfully"
+    else
+        LOGE "Panel restart failed, Probably because it takes longer than two seconds to start, Please check the log information later"
+    fi
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+status() {
+    systemctl status x-ui -l
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+enable() {
+    systemctl enable x-ui
+    if [[ $? == 0 ]]; then
+        LOGI "x-ui Set to boot automatically on startup successfully"
+    else
+        LOGE "x-ui Failed to set Autostart"
+    fi
+
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+disable() {
+    systemctl disable x-ui
+    if [[ $? == 0 ]]; then
+        LOGI "x-ui Autostart Cancelled successfully"
+    else
+        LOGE "x-ui Failed to cancel autostart"
+    fi
+
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+show_log() {
+    journalctl -u x-ui.service -e --no-pager -f
+    if [[ $# == 0 ]]; then
+        before_show_menu
+    fi
+}
+
+enable_bbr() {
+    if grep -q "net.core.default_qdisc=fq" /etc/sysctl.conf && grep -q "net.ipv4.tcp_congestion_control=bbr" /etc/sysctl.conf; then
+        echo -e "${green}BBR is already enabled!${plain}"
+        exit 0
+    fi
+
+    # Check the OS and install necessary packages
+    if [[ "$(cat /etc/os-release | grep -E '^ID=' | awk -F '=' '{print $2}')" == "ubuntu" ]]; then
+        sudo apt-get update && sudo apt-get install -yqq --no-install-recommends ca-certificates
+    elif [[ "$(cat /etc/os-release | grep -E '^ID=' | awk -F '=' '{print $2}')" == "debian" ]]; then
+        sudo apt-get update && sudo apt-get install -yqq --no-install-recommends ca-certificates
+    elif [[ "$(cat /etc/os-release | grep -E '^ID=' | awk -F '=' '{print $2}')" == "fedora" ]]; then
+        sudo dnf -y update && sudo dnf -y install ca-certificates
+    elif [[ "$(cat /etc/os-release | grep -E '^ID=' | awk -F '=' '{print $2}')" == "centos" ]]; then
+        sudo yum -y update && sudo yum -y install ca-certificates
+    else
+        echo "Unsupported operating system. Please check the script and install the necessary packages manually."
+        exit 1
+    fi
+
+    # Enable BBR
+    echo "net.core.default_qdisc=fq" | sudo tee -a /etc/sysctl.conf
+    echo "net.ipv4.tcp_congestion_control=bbr" | sudo tee -a /etc/sysctl.conf
+
+    # Apply changes
+    sudo sysctl -p
+
+    # Verify that BBR is enabled
+    if [[ $(sysctl net.ipv4.tcp_congestion_control | awk '{print $3}') == "bbr" ]]; then
+        echo -e "${green}BBR has been enabled successfully.${plain}"
+    else
+        echo -e "${red}Failed to enable BBR. Please check your system configuration.${plain}"
+    fi
+}
+
+update_shell() {
+    wget -O /usr/bin/x-ui -N --no-check-certificate https://github.com/Ptechgithub/3x-ui/raw/main/x-ui.sh
+    if [[ $? != 0 ]]; then
+        echo ""
+        LOGE "Failed to download script, Please check whether the machine can connect Github"
+        before_show_menu
+    else
+        chmod +x /usr/bin/x-ui
+        LOGI "Upgrade script succeeded, Please rerun the script" && exit 0
+    fi
+}
+
+# 0: running, 1: not running, 2: not installed
+check_status() {
+    if [[ ! -f /etc/systemd/system/x-ui.service ]]; then
+        return 2
+    fi
+    temp=$(systemctl status x-ui | grep Active | awk '{print $3}' | cut -d "(" -f2 | cut -d ")" -f1)
+    if [[ "${temp}" == "running" ]]; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+check_enabled() {
+    temp=$(systemctl is-enabled x-ui)
+    if [[ "${temp}" == "enabled" ]]; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+check_uninstall() {
+    check_status
+    if [[ $? != 2 ]]; then
+        echo ""
+        LOGE "Panel installed, Please do not reinstall"
+        if [[ $# == 0 ]]; then
+            before_show_menu
+        fi
+        return 1
+    else
+        return 0
+    fi
+}
+
+check_install() {
+    check_status
+    if [[ $? == 2 ]]; then
+        echo ""
+        LOGE "Please install the panel first"
+        if [[ $# == 0 ]]; then
+            before_show_menu
+        fi
+        return 1
+    else
+        return 0
+    fi
+}
+
+show_status() {
+    check_status
+    case $? in
+    0)
+        echo -e "Panel state: ${green}Running${plain}"
+        show_enable_status
+        ;;
+    1)
+        echo -e "Panel state: ${yellow}Not Running${plain}"
+        show_enable_status
+        ;;
+    2)
+        echo -e "Panel state: ${red}Not Installed${plain}"
+        ;;
+    esac
+    show_xray_status
+}
+
+show_enable_status() {
+    check_enabled
+    if [[ $? == 0 ]]; then
+        echo -e "Start automatically: ${green}Yes${plain}"
+    else
+        echo -e "Start automatically: ${red}No${plain}"
+    fi
+}
+
+check_xray_status() {
+    count=$(ps -ef | grep "xray-linux" | grep -v "grep" | wc -l)
+    if [[ count -ne 0 ]]; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+show_xray_status() {
+    check_xray_status
+    if [[ $? == 0 ]]; then
+        echo -e "xray state: ${green}Running${plain}"
+    else
+        echo -e "xray state: ${red}Not Running${plain}"
+    fi
+}
+
+open_ports() {
+    if ! command -v ufw &> /dev/null
+    then
+        echo "ufw firewall is not installed. Installing now..."
+        sudo apt-get update
+        sudo apt-get install -y ufw
+    else
+        echo "ufw firewall is already installed"
+    fi
+
+    # Check if the firewall is inactive
+    if sudo ufw status | grep -q "Status: active"; then
+        echo "firewall is already active"
+    else
+        # Open the necessary ports
+        sudo ufw allow ssh
+        sudo ufw allow http
+        sudo ufw allow https
+        sudo ufw allow 2053/tcp
+
+        # Enable the firewall
+        sudo ufw --force enable
+    fi
+
+    # Prompt the user to enter a list of ports
+    read -p "Enter the ports you want to open (e.g. 80,443,2053 or range 400-500): " ports
+
+    # Check if the input is valid
+    if ! [[ $ports =~ ^([0-9]+|[0-9]+-[0-9]+)(,([0-9]+|[0-9]+-[0-9]+))*$ ]]; then
+        echo "Error: Invalid input. Please enter a comma-separated list of ports or a range of ports (e.g. 80,443,2053 or 400-500)." >&2; exit 1
+    fi
+
+    # Open the specified ports using ufw
+    IFS=',' read -ra PORT_LIST <<< "$ports"
+    for port in "${PORT_LIST[@]}"; do
+        if [[ $port == *-* ]]; then
+        # Split the range into start and end ports
+        start_port=$(echo $port | cut -d'-' -f1)
+        end_port=$(echo $port | cut -d'-' -f2)
+        # Loop through the range and open each port
+        for ((i=start_port; i<=end_port; i++)); do
+            sudo ufw allow $i
+        done
+        else
+        sudo ufw allow "$port"
+        fi
+    done
+
+    # Confirm that the ports are open
+    sudo ufw status | grep $ports
+}
+
+update_geo() {
+    local defaultBinFolder="/usr/local/x-ui/bin"
+    read -p "Please enter x-ui bin folder path. Leave blank for default. (Default: '${defaultBinFolder}')" binFolder
+    binFolder=${binFolder:-${defaultBinFolder}}
+    if [[ ! -d ${binFolder} ]]; then
+        LOGE "Folder ${binFolder} not exists!"
+        LOGI "making bin folder: ${binFolder}..."
+        mkdir -p ${binFolder}
+    fi
+
+    systemctl stop x-ui
+    cd ${binFolder}
+    rm -f geoip.dat geosite.dat iran.dat
+    wget -N https://github.com/Loyalsoldier/v2ray-rules-dat/releases/latest/download/geoip.dat
+    wget -N https://github.com/Loyalsoldier/v2ray-rules-dat/releases/latest/download/geosite.dat
+    wget -N https://github.com/bootmortis/iran-hosted-domains/releases/latest/download/iran.dat
+    systemctl start x-ui
+    echo -e "${green}Geosite.dat + Geoip.dat + Iran.dat have been updated successfully in bin folder '${binfolder}'!${plain}"
+    before_show_menu
+}
+
+install_acme() {
+    cd ~
+    LOGI "install acme..."
+    curl https://get.acme.sh | sh
+    if [ $? -ne 0 ]; then
+        LOGE "install acme failed"
+        return 1
+    else
+        LOGI "install acme succeed"
+    fi
+    return 0
+}
+
+#method for standalone mode
+ssl_cert_issue() {
+    #check for acme.sh first
+    if ! command -v ~/.acme.sh/acme.sh &>/dev/null; then
+        echo "acme.sh could not be found. we will install it"
+        install_acme
+        if [ $? -ne 0 ]; then
+            LOGE "install acme failed, please check logs"
+            exit 1
+        fi
+    fi
+    #install socat second
+    if [[ "${release}" == "centos" ]] || [[ "${release}" == "fedora" ]] ; then
+        yum install socat -y
+    else
+        apt install socat -y
+    fi
+    if [ $? -ne 0 ]; then
+        LOGE "install socat failed,please check logs"
+        exit 1
+    else
+        LOGI "install socat succeed..."
+    fi
+
+    #get the domain here,and we need verify it
+    local domain=""
+    read -p "Please enter your domain name:" domain
+    LOGD "your domain is:${domain},check it..."
+    #here we need to judge whether there exists cert already
+    local currentCert=$(~/.acme.sh/acme.sh --list | tail -1 | awk '{print $1}')
+    if [ ${currentCert} == ${domain} ]; then
+        local certInfo=$(~/.acme.sh/acme.sh --list)
+        LOGE "system already have certs here,can not issue again,current certs details:"
+        LOGI "$certInfo"
+        exit 1
+    else
+        LOGI "your domain is ready for issuing cert now..."
+    fi
+	
+	#create a directory for install cert
+	certPath="/root/cert/${domain}"
+	if [ ! -d "$certPath" ]; then
+		mkdir -p "$certPath"
+	else
+		rm -rf "$certPath"
+		mkdir -p "$certPath"
+	fi
+	
+    #get needed port here
+    local WebPort=80
+    read -p "please choose which port do you use,default will be 80 port:" WebPort
+    if [[ ${WebPort} -gt 65535 || ${WebPort} -lt 1 ]]; then
+        LOGE "your input ${WebPort} is invalid,will use default port"
+    fi
+    LOGI "will use port:${WebPort} to issue certs,please make sure this port is open..."
+    #NOTE:This should be handled by user
+    #open the port and kill the occupied progress
+    ~/.acme.sh/acme.sh --set-default-ca --server letsencrypt
+    ~/.acme.sh/acme.sh --issue -d ${domain} --standalone --httpport ${WebPort}
+    if [ $? -ne 0 ]; then
+        LOGE "issue certs failed,please check logs"
+        rm -rf ~/.acme.sh/${domain}
+        exit 1
+    else
+        LOGE "issue certs succeed,installing certs..."
+    fi
+    #install cert
+    ~/.acme.sh/acme.sh --installcert -d ${domain} \
+        --key-file /root/cert/${domain}/privkey.pem \
+        --fullchain-file /root/cert/${domain}/fullchain.pem
+
+    if [ $? -ne 0 ]; then
+        LOGE "install certs failed,exit"
+        rm -rf ~/.acme.sh/${domain}
+        exit 1
+    else
+        LOGI "install certs succeed,enable auto renew..."
+    fi
+	
+	~/.acme.sh/acme.sh --upgrade --auto-upgrade
+	if [ $? -ne 0 ]; then
+		LOGE "auto renew failed, certs details:"
+		ls -lah cert/*
+		chmod 755 $certPath/*
+		exit 1
+	else
+		LOGI "auto renew succeed, certs details:"
+		ls -lah cert/*
+		chmod 755 $certPath/*
+	fi
+
+}
+
+
+warp_fixchatgpt() {
+    curl -fsSL https://gist.githubusercontent.com/hamid-gh98/dc5dd9b0cc5b0412af927b1ccdb294c7/raw/install_warp_proxy.sh | bash
+    echo ""
+    before_show_menu
+}
+
+run_speedtest() {
+    # Check if Speedtest is already installed
+    if ! command -v speedtest &> /dev/null; then
+        # If not installed, install it
+        if command -v dnf &> /dev/null; then
+            sudo dnf install -y curl
+            curl -s https://packagecloud.io/install/repositories/ookla/speedtest-cli/script.rpm.sh | sudo bash
+            sudo dnf install -y speedtest
+        elif command -v yum &> /dev/null; then
+            sudo yum install -y curl
+            curl -s https://packagecloud.io/install/repositories/ookla/speedtest-cli/script.rpm.sh | sudo bash
+            sudo yum install -y speedtest
+        elif command -v apt-get &> /dev/null; then
+            sudo apt-get update && sudo apt-get install -y curl
+            curl -s https://packagecloud.io/install/repositories/ookla/speedtest-cli/script.deb.sh | sudo bash
+            sudo apt-get install -y speedtest
+        elif command -v apt &> /dev/null; then
+            sudo apt update && sudo apt install -y curl
+            curl -s https://packagecloud.io/install/repositories/ookla/speedtest-cli/script.deb.sh | sudo bash
+            sudo apt install -y speedtest
+        else
+            echo "Error: Package manager not found. You may need to install Speedtest manually."
+            return 1
+        fi
+    fi
+
+    # Run Speedtest
+    speedtest
+}
+
+
+
+show_usage() {
+    echo "x-ui control menu usages: "
+    echo "------------------------------------------"
+    echo -e "x-ui              - Enter control menu"
+    echo -e "x-ui start        - Start x-ui "
+    echo -e "x-ui stop         - Stop  x-ui "
+    echo -e "x-ui restart      - Restart x-ui "
+    echo -e "x-ui status       - Show x-ui status"
+    echo -e "x-ui enable       - Enable x-ui on system startup"
+    echo -e "x-ui disable      - Disable x-ui on system startup"
+    echo -e "x-ui log          - Check x-ui logs"
+    echo -e "x-ui update       - Update x-ui "
+    echo -e "x-ui install      - Install x-ui "
+    echo -e "x-ui uninstall    - Uninstall x-ui "
+    echo "------------------------------------------"
+}
+
+show_menu() {
+    echo -e "
+  ${green}3X-ui Panel Management Script${plain}
+  ${green}0.${plain} Exit Script
+————————————————
+  ${green}1.${plain} Install x-ui
+  ${green}2.${plain} Update x-ui
+  ${green}3.${plain} Uninstall x-ui
+————————————————
+  ${green}4.${plain} Reset Username & Password & Secret Token
+  ${green}5.${plain} Reset Panel Settings
+  ${green}6.${plain} Change Panel Port
+  ${green}7.${plain} View Current Panel Settings
+————————————————
+  ${green}8.${plain} Start x-ui
+  ${green}9.${plain} Stop x-ui
+  ${green}10.${plain} Restart x-ui
+  ${green}11.${plain} Check x-ui Status
+  ${green}12.${plain} Check x-ui Logs
+————————————————
+  ${green}13.${plain} Enable x-ui On System Startup
+  ${green}14.${plain} Disable x-ui On System Startup
+————————————————
+  ${green}15.${plain} Enable BBR 
+  ${green}16.${plain} Apply for an SSL Certificate
+  ${green}17.${plain} Update Geo Files
+  ${green}18.${plain} Active Firewall and open ports
+  ${green}19.${plain} Install WARP
+  ${green}20.${plain} Speedtest by Ookla
+ "
+    show_status
+    echo && read -p "Please enter your selection [0-20]: " num
+
+    case "${num}" in
+    0)
+        exit 0
+        ;;
+    1)
+        check_uninstall && install
+        ;;
+    2)
+        check_install && update
+        ;;
+    3)
+        check_install && uninstall
+        ;;
+    4)
+        check_install && reset_user
+        ;;
+    5)
+        check_install && reset_config
+        ;;
+    6)
+        check_install && set_port
+        ;;
+    7)
+        check_install && check_config
+        ;;
+    8)
+        check_install && start
+        ;;
+    9)
+        check_install && stop
+        ;;
+    10)
+        check_install && restart
+        ;;
+    11)
+        check_install && status
+        ;;
+    12)
+        check_install && show_log
+        ;;
+    13)
+        check_install && enable
+        ;;
+    14)
+        check_install && disable
+        ;;
+    15)
+        enable_bbr
+        ;;
+    16)
+        ssl_cert_issue
+        ;;
+    17)
+        update_geo
+        ;;
+    18)
+        open_ports
+        ;;
+    19)
+        warp_fixchatgpt
+        ;;
+	20)
+        run_speedtest
+        ;;
+    *)
+        LOGE "Please enter the correct number [0-20]"
+        ;;
+    esac
+}
+
+if [[ $# > 0 ]]; then
+    case $1 in
+    "start")
+        check_install 0 && start 0
+        ;;
+    "stop")
+        check_install 0 && stop 0
+        ;;
+    "restart")
+        check_install 0 && restart 0
+        ;;
+    "status")
+        check_install 0 && status 0
+        ;;
+    "enable")
+        check_install 0 && enable 0
+        ;;
+    "disable")
+        check_install 0 && disable 0
+        ;;
+    "log")
+        check_install 0 && show_log 0
+        ;;
+    "update")
+        check_install 0 && update 0
+        ;;
+    "install")
+        check_uninstall 0 && install 0
+        ;;
+    "uninstall")
+        check_install 0 && uninstall 0
+        ;;
+    *) show_usage ;;
+    esac
+else
+    show_menu
+fi